1401 ASM: SUPERALLOYS A Technical Guide
1402 Penetrant testing materials
1403 Welding and welded connections
1404 Weldability and defects in weldments
1405 WELDING PROCESSES USED IN NUCLEAR POWER PLANTS
1406 Welding
1407 Welding safety - AR Training 2010 – ’11 DMME Division of Mineral Mining
1408 Costing of Joining Methods - Arc Welding Costs
1409 Welding Defects
1410 Destructive Examination & Testing
1411 Arc Welding Safety Guide for Safe Arc Welding
1412 Introduction to Nondestructive Testing
1413 Penetrant testing
1414 Liquid Penetrant Testing
1415 GAS METAL ARC WELDING (GMAW)
1416 Welded Joints: Types and Uses
1417 SHIELDING GASES SELECTION MANUAL
1418 SHIELDED METAL-ARC WELDING AND WEARFACING
1419 Shielded Metal Arc Welding
1420 Robotic Welding System Issues
1421 STICK ELECTRODE WELDING GUIDE
1422 Influence of Z-phase on Long-term Creep Stability of Martensitic 9 to 12 % Cr Steels
1423 Evolution of microstructure during long-term creep of a tempered martensitic ferritic steel
1424 9-12% creep-resistant steels: alloy design* TEM characterisation of microstructure evaluation and creep response at 650° C
1425 Advanced Austenitic Heat-Resistant Steels for Ultra-Super-Critical (USC) Fossil Power Plants
1426 ASNT handbooks
1427 Metallurgy advanced in materials and processes
1428 THE EFFECT OF AGEING TEMPERATURES ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF GX12CrMoVNbN9-1 (GP91) CAST STEEL
1429 COMPARISON OF HARDNESS* TENSILE STRESS AND YIELD STRESS* DEPENDING ON TEMPERATURE AND ANNEALING TIME OF DEGRADATION OF P91 STEEL
1430 Susceptibility of IN740 to HAZ Liquation *****ing and Ductility-Dip *****ing
1431 ELEVATED-TEMPERATURE FERRITIC AND MARTENSITIC STEELS AND THEIR APPLICATION TO FUTURE NUCLEAR REACTORS
1432 Materials for Ultra-Supercritical Coal-Fired Power Plant Boilers
1433 Piping Calculations Manual
1434 Creep
1435 Steam Generator for Advanced Ultra- Supercritical Power Plants 700 to 760C
1436 Energy Materials
1437 IWE 2006
1438 NEXT GENERATION ENGINEERED MATERIALS FOR ULTRA SUPERCRITICAL STEAM TURBINES
1439 Nondestructive Evaluation Theory* Techniques* and Applications
1440 Pipe welding procedures
1441 HIGH-EFFICIENCY SUPERCRITICAL TECHNOLOGY
1442 Prediction of fracture toughness temperature dependence applying neural network
1443 EXPERIENCES IN WELDING OF MEMBRANE PANELS MADE OF 7CrMoVTiB 10-10 (T24) STEEL.
1444 Charpy notch toughness and cleveage strenght of reheated martensite and lower bainite
1445 Preliminary Materials Selection Issues for the Next Generation Nuclear Plant Reactor Pressure Vessel
1446 FATIGUE STRENGTH OF WELDS IN THE VIEW OF RESIDUAL STRESSES
1447 Use of Duplex Stainless Steels in the Oil Refining Industry
1448 P91 Steel - No Good Deed Goes Unpunished
1449 GUIDE TO TIG WELDING
1450 Requirements concerning MATERIALS AND WELDING


[link Point to another website Only the registered members can access]