Hi Guys
Can any one upload PED 94/97/EC...I need it badly..
Regards
Loc
Hi Guys
Can any one upload PED 94/97/EC...I need it badly..
Regards
Loc
See
[link Point to another website Only the registered members can access]
you can find Directive also some Guidelines, Materials, etc
[link Point to another website Only the registered members can access]
There you go!
Thanks a lot dude...
I have one question...
We are supplying volume bottles where the design is as per ASME VIII Division 1 and Inspection and testing as per ASME IX.
The client has asked that Radiography and MT shall be as per PED 94/97/EC and also the WPS and PQR shall be as per PED.
What I know is, there is no specific guide line for RT/MT and WPS/PQR as per PED.
As per Annexure 1, 3.1.3, PED says, the Personnel performing the NDT shall be approved by inspector or Third part.
Also for welding, the joint efficiency is same as ASME.
Can some one tell me if there is any particular requirement in PED for RT/MT, like we have in ASME 8 division 1.
Best regards
Lochan
PED does not provide fabrication rules. ASME is recognized by PED. I think following those rules would suffice.
Yepp Curious...
I guess so...I mean PED is not a code....Its just a Guide line...You have to follow UW 11 and UW 12 of ASME 8 for RT....
Keep in touch
TC
It is possible that your Client has in mind (as reference) a PED harmonized standard- EN 13445. Part 5 is about Inspection and testing.
See[link Point to another website Only the registered members can access]
Last edited by mariog; 10-31-2009 at 08:52 PM.
Dear friend,
DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT is not subject to Copyright (I suspect they were worried nobody will pay for a Parliament document ...) so you can download it for free from a lot of sources...
Attached is the . pdf version previously posted.
Last edited by mariog; 11-01-2009 at 11:34 PM.
Thank you mariog
thanks mariog
thanks mariog
Bookmarks