full list:
ISO 802:1976 Aluminium oxide primarily used for the production of aluminium -- Preparation and storage of test samples
ISO 804:1976 Aluminium oxide primarily used for the production of aluminium -- Preparation of solution for analysis -- Method by alkaline fusion
ISO 806:2004 Aluminium oxide primarily used for the production of aluminium -- Determination of loss of mass at 300 degrees C and 1 000 degrees C
ISO 901:1976 Aluminium oxide primarily used for the production of aluminium -- Determination of absolute density -- Pyknometer method
ISO 902:1976 Aluminium oxide primarily used for the production of aluminium -- Measurement of the angle of repose
ISO 1619:1976 Cryolite* natural and artificial -- Preparation and storage of test samples
ISO 1620:1976 Cryolite* natural and artificial -- Determination of silica content -- Reduced molybdosilicate spectrophotometric method
ISO 1693:1976 Cryolite* natural and artificial -- Determination of fluorine content -- Modified Willard-Winter method
ISO 1694:1976 Cryolite* natural and artificial -- Determination of iron content -- 1*10- Phenanthroline photometric method
ISO 2073:1976 Aluminium oxide primarily used for the production of aluminium -- Preparation of solution for analysis -- Method by hydrochloric acid attack under pressure
ISO 2366:1974 Cryolite* natural and artificial -- Determination of sodium content -- Flame emission and atomic absorption spectrophotometric methods
ISO 2367:1972 Cryolite (natural and artificial) -- Determination of aluminium content -- 8- Hydroxyquinoline gravimetric method
ISO 2828:1973 Aluminium oxide primarily used for the production of aluminium -- Determination of fluorine content -- Alizarin complexone and lanthanum chloride spectrophotometric method
ISO 2829:1973 Aluminium oxide primarily used for the production of aluminium -- Determination of phosphorus content -- Reduced phosphomolybdate spectrophotometric method
ISO 2830:1973 Cryolite* natural and artificial -- Determination of aluminium content -- Atomic absorption method
ISO 2865:1973 Aluminium oxide primarily used for the production of aluminium -- Determination of boron content -- Curcumin spectrophotometric method
ISO 2865:1973/Cor 1:1991 Aluminium oxide primarily used for the production of aluminium -- Determination of boron content -- Curcumin spectrophotometric method
ISO 2926:2013 Aluminium oxide used for the production of primary aluminium -- Particle size analysis for the range 45 µm to 150 µm -- Method using electroformed sieves
ISO 2927:1973 Aluminium oxide primarily used for the production of aluminium -- Sampling
ISO 2961:1974 Aluminium oxide primarily used for the production of aluminium -- Determination of an adsorption index
ISO 3391:1976 Cryolite* natural and artificial -- Determination of calcium content -- Flame atomic absorption method
ISO 3393:1976 Cryolite* natural and artificial* and aluminium fluoride for industrial use -- Determination of moisture content -- Gravimetric method
ISO 3429:1976 Sodium fluoride primarily used for the production of aluminium -- Determination of iron content -- 1*10- Phenanthroline photometric method
ISO 3430:1976 Sodium fluoride primarily used for the production of aluminium -- Determination of silica content -- Reduced molybdosilicate spectrophotometric method
ISO 3431:1976 Sodium fluoride primarily used for the production of aluminium -- Determination of soluble sulphates content -- Turbidimetric method
ISO 3566:1976 Sodium fluoride primarily used for the production of aluminium -- Determination of chlorides content -- Turbidimetric method
ISO 3699:1976 Anhydrous hydrogen fluoride for industrial use -- Determination of water content -- Karl Fischer method
ISO/TR 4277:2009 Cryolite* natural and artificial -- Conventional test for evaluation of free fluorides content
ISO 4280:1977 Cryolite* natural and artificial* and aluminium fluoride for industrial use -- Determination of sulphate content -- Barium sulphate gravimetric method
ISO 5930:1979 Cryolite* natural and artificial* and aluminium fluoride for industrial use -- Determination of phosphorus content -- Reduced molybdophosphate photometric method
ISO 5931:2000 Carbonaceous materials used in the production of aluminium -- Calcined coke and calcined carbon products -- Determination of total sulfur by the Eschka method
ISO 5938:1979 Cryolite* natural and artificial* and aluminium fluoride for industrial use -- Determination of sulphur content -- X-ray fluorescence spectrometric method
ISO 5939:1980 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of water content -- Azeotropic distillation (Dean and Stark) method
ISO 5940:1981 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of softening point by the ring-and-ball method
ISO 5940-2:2007 Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Part 2: Determination of the softening point (Mettler softening point method)
ISO 6257:2002 Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Sampling
ISO 6374:1981 Cryolite* natural and artificial* and aluminium fluoride for industrial use -- Determination of phosphorus content -- Atomic absorption spectrometric method after extraction
ISO 6375:1980 Carbonaceous materials for the production of aluminium -- Coke for electrodes -- Sampling
ISO 6376:1980 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of content of toluene-insoluble material
ISO 6791:1981 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of contents of quinoline-insoluble material
ISO 6997:1985 Carbonaceous materials for the production of aluminium -- Calcined coke -- Determination of apparent oil content -- Heating method
ISO 6998:1997 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of coking value
ISO 6998:1997/Cor 1:1999 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of coking value
ISO 6999:1983 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of density -- Pycnometric method
ISO 8003:1985 Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Measurement of dynamic viscosity
ISO 8004:1985 Carbonaceous materials for the production of aluminium -- Calcined coke and calcined carbon products -- Determination of the density in xylene -- Pyknometric method
ISO 8005:2005 Carbonaceous materials used in the production of aluminium -- Green and calcined coke -- Determination of ash content
ISO 8006:1985 Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Determination of ash
ISO 8007-1:1999 Carbonaceous materials used in the production of aluminium -- Sampling plans and sampling from individual units -- Part 1: Cathode blocks
ISO 8007-2:1999 Carbonaceous materials used in the production of aluminium -- Sampling plans and sampling from individual units -- Part 2: Prebaked anodes
ISO 8007-3:2003 Carbonaceous materials used in the production of aluminium -- Sampling plans and sampling from individual units -- Part 3: Sidewall blocks
ISO 8008:2005 Aluminium oxide primarily used for the production of aluminium -- Determination of specific surface area by nitrogen adsorption
ISO 8220:1986 Aluminium oxide primarily used for the production of aluminium -- Determination of the fine particle size distribution (less than 60 mu/m) -- Method using electroformed sieves
ISO 8658:1997 Carbonaceous materials for use in the production of aluminium -- Green and calcined coke -- Determination of trace elements by flame atomic absorption spectrometry
ISO 8723:1986 Carbonaceous materials for the production of aluminium -- Calcined coke -- Determination of oil content -- Method by solvent extraction
ISO 9055:1988 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of sulfur content by the bomb method
ISO 9088:1997 Carbonaceous materials used for the production of aluminium -- Cathode blocks and prebaked anodes -- Determination of the density in xylene by a pyknometric method
ISO 9406:1995 Carbonaceous materials for the production of aluminium -- Green coke -- Determination of volatile matter content by gravimetric analysis
ISO 10142:1996 Carbonaceous materials for use in the production of aluminium -- Calcined coke -- Determination of grain stability using a laboratory vibration mill
ISO 10143:2014 Carbonaceous materials for the production of aluminium -- Calcined coke for electrodes -- Determination of the electrical resistivity of granules
ISO 10236:1995 Carbonaceous materials for the production of aluminium -- Green coke and calcined coke for electrodes -- Determination of bulk density (tapped)
ISO 10237:1997 Carbonaceous materials for use in the production of aluminium -- Calcined coke -- Determination of residual-hydrogen content
ISO 10238:1999 Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Determination of sulfur content by an instrumental method
ISO 11412:1998 Carbonaceous materials for the production of aluminium -- Calcined coke -- Determination of water content
ISO 11706:2012 Carbonaceous materials for the production of aluminium -- Prebaked anodes -- Determination of the fracture energy
ISO 11713:2000 Carbonaceous materials used in the production of aluminium -- Cathode blocks and baked anodes -- Determination of electrical resistivity at ambient temperature
ISO 12315:2010 Aluminium oxide primarily used for production of aluminium -- Method for calculating the Al2O3 content of smelter-grade alumina
ISO 12926:2012 Aluminium fluoride for industrial use -- Determination of trace elements -- Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets
ISO 12977:1999 Carbonaceous materials for use in the production of aluminium -- Pitch for electrodes -- Determination of volatile matter content
ISO 12979:1999 Carbonaceous materials for use in the production of aluminium -- Pitch for electrodes -- Determination of C/H ratio in the quinoline-insoluble fraction
ISO 12980:2000 Carbonaceous materials used in the production of aluminium -- Green coke and calcined coke for electrodes -- Analysis using an X-ray fluorescence method
ISO 12981-1:2000 Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of the reactivity to carbon dioxide -- Part 1: Loss in mass method
ISO 12982-1:2000 Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of the reactivity to air -- Part 1: Ignition temperature method
ISO 12984:2000 Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of particle size distribution
ISO 12985-1:2000 Carbonaceous materials used in the production of aluminium -- Baked anodes and cathode blocks -- Part 1: Determination of apparent density using a dimensions method
ISO 12985-2:2000 Carbonaceous materials used in the production of aluminium -- Baked anodes and cathode blocks -- Part 2: Determination of apparent density and of open porosity using a hydrostatic method
ISO 12986-1:2014 Carbonaceous materials used in the production of aluminium -- Prebaked anodes and cathode blocks -- Part 1: Determination of bending/shear strength by the three-point method
ISO 12986-2:2014 Carbonaceous materials used in the production of aluminium -- Prebaked anodes and cathode blocks -- Part 2: Determination of flexural strength by the four-point method
ISO 12987:2004 Carbonaceous materials for the production of aluminium -- Anodes* cathodes blocks* sidewall blocks and baked ramming pastes -- Determination of the thermal conductivity using a comparative method
ISO 12988-1:2000 Carbonaceous materials used in the production of aluminium -- Baked anodes -- Determination of the reactivity to carbon dioxide -- Part 1: Loss in mass method
ISO 12988-2:2004 Carbonaceous materials used in the production of aluminium -- Baked anodes -- Determination of the reactivity to carbon dioxide -- Part 2: Thermogravimetric method
ISO 12989-1:2000 Carbonaceous materials used in the production of aluminium -- Baked anodes and sidewall blocks -- Determination of the reactivity to air -- Part 1: Loss in mass method
ISO 12989-2:2004 Carbonaceous materials used in the production of aluminium -- Baked anodes and sidewall blocks -- Determination of the reactivity to air -- Part 2: Thermogravimetric method
ISO 14420:2005 Carbonaceous products for the production of aluminium -- Baked anodes and shaped carbon products -- Determination of the coefficient of linear thermal expansion
ISO 14422:1999 Carbonaceous materials used in the production of aluminium -- Cold-ramming pastes -- Methods of sampling
ISO/TS 14423:1999 Carbonaceous materials used in the production of aluminium -- Cold-ramming pastes -- Determination of effective binder content and aggregate content by extraction with quinoline* and determination of aggregate size distribution
ISO/TS 14425:1999 Carbonaceous materials used in the production of aluminium -- Cold-ramming pastes -- Determination of volatile-matter content of unbaked pastes
ISO 14427:2004 Carbonaceous materials used in the production of aluminium -- Cold and tepid ramming pastes -- Preparation of unbaked test specimens and determination of apparent density after compaction
ISO 14428:2005 Carbonaceous materials for the production of aluminium -- Cold and tepid ramming pastes -- Expansion/shrinkage during baking
ISO 14435:2005 Carbonaceous materials for the production of aluminium -- Petroleum coke -- Determination of trace metals by inductively coupled plasma atomic emission spectrometry
ISO 15379-1:2015 Carbonaceous materials for the production of aluminium -- Cathode block materials -- Part 1: Determination of the expansion due to sodium penetration with application of pressure
ISO 15379-2:2015 Carbonaceous materials for the production of aluminium -- Cathode block materials -- Part 2: Determination of the expansion due to sodium penetration without application of pressure
ISO 15906:2007 Carbonaceous materials for the production of aluminium -- Baked anodes -- Determination of the air permeability
ISO 17499:2006 Carbonaceous materials used in the production of aluminium -- Determination of baking level expressed by equivalent temperature
ISO 17500:2006 Aluminium oxide used for the production of primary aluminium -- Determination of attrition index
ISO 17544:2004 Carbonaceous materials used in the production of aluminium -- Cold and tepid ramming pastes -- Determination of rammability of unbaked pastes
ISO 18142:2014 Carbonaceous materials for the production of primary aluminium -- Baked carbon bodies -- Determination of the dynamic elasticity modulus by the resonance method
ISO 18515:2014 Carbonaceous materials for the production of aluminium -- Cathode blocks and baked anodes -- Determination of compressive strength
ISO 18842:2015 Aluminium oxide primarily used for the production of aluminium -- Method for the determination of tapped and untapped density
ISO 18843:2015 Aluminium oxide primarily used for the production of aluminium -- Method for the determination of flow time
ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium -- Determination of alpha alumina content -- Method using X-ray diffraction net peak areas
ISO 20202:2004 Carbonaceous materials used in the production of aluminium -- Cold and tepid ramming pastes -- Preparation of baked test pieces and determination of loss on baking
ISO 20203:2005 Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of crystallite size of calcined petroleum coke by X-ray diffraction
ISO 20292:2009 Materials for the production of primary aluminium -- Dense refractory bricks -- Determination of cryolite resistance
ISO 21687:2007 Carbonaceous materials used in the production of aluminium -- Determination of density by gas pyknometry (volumetric) using helium as the analysis gas -- Solid materials
ISO 23201:2015 Aluminium oxide primarily used for production of aluminium -- Determination of trace elements -- Wavelength dispersive X-ray fluorescence spectrometric method
ISO 23202:2006 Aluminium oxide used for the production of aluminium -- Determination of particles passing a 20 micrometre aperture sieve
the missing are:
ISO 1619:1976 Cryolite* natural and artificial -- Preparation and storage of test samples
ISO 1620:1976 Cryolite* natural and artificial -- Determination of silica content -- Reduced molybdosilicate spectrophotometric method
ISO 1694:1976 Cryolite* natural and artificial -- Determination of iron content -- 1*10- Phenanthroline photometric method
ISO 2367:1972 Cryolite (natural and artificial) -- Determination of aluminium content -- 8- Hydroxyquinoline gravimetric method
ISO 3699:1976 Anhydrous hydrogen fluoride for industrial use -- Determination of water content -- Karl Fischer method
ISO 8003:1985 Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Measurement of dynamic viscosity
link:
[link Point to another website Only the registered members can access]
Reply With Quote
Bookmarks