full list:
EN 206:2013 Concrete - Specification, performance, production and conformity
EN 445:2007 Grout for prestressing tendons - Test methods
EN 446:2007 Grout for prestressing tendons - Grouting procedures
EN 447:2007 Grout for prestressing tendons - Basic requirements
EN 450-1:2012 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
EN 450-2:2005 Fly ash for concrete - Part 2: Conformity evaluation
EN 451-1:2003 Method of testing fly ash - Part 1: Determination of free calcium oxide content
EN 451-2:1994 Method of testing fly ash - Part 2: Determination of fineness by wet sieving
EN 480-1:2014 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
EN 480-2:2006 Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time
EN 480-4:2005 Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete
EN 480-5:2005 Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption
EN 480-6:2005 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
EN 480-8:2012 Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content
EN 480-10:2009 Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content
EN 480-11:2005 Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete
EN 480-12:2005 Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures
EN 480-13:2015 Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
EN 480-14:2006 Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test
EN 480-15:2013 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
EN 523:2003 Steel strip sheaths for prestressing tendons - Terminology, requirements, quality control
EN 524-1:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 1: Determination of shape and dimensions
EN 524-2:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 2: Determination of flexural behaviour
EN 524-3:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 3: To-and-fro bending test
EN 524-4:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 4: Determination of lateral load resistance
EN 524-5:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 5: Determination of tensile load resistance
EN 524-6:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 6: Determination of leaktightness (Determination of water loss)
EN 934-1:2008 Admixtures for concrete, mortar and grout - Part 1: Common requirements
EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
EN 934-3:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
EN 934-4:2009 Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
EN 934-5:2007 Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling
EN 934-6:2001 Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity
EN 934-6:2001/A1:2005 Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity
EN 1008:2002 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
EN 1504-1:2005 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions
EN 1504-2:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
EN 1504-3:2005 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
EN 1504-4:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
EN 1504-5:2013 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
EN 1504-6:2006 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar
EN 1504-7:2006 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
EN 1504-8:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity
EN 1504-9:2008 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems
EN 1504-10:2003 Products and systems for the protection and repair of concrete structures - Definitions - Requirements - Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
EN 1504-10:2003/AC:2005 Products and systems for the protection and repair of concrete structures - Definitions - Requirements - Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
EN 1542:1999 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
EN 1543:1998 Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers
EN 1544:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars
EN 1766:2000 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing
EN 1767:1999 Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis
EN 1770:1998 Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion
EN 1771:2004 Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability and splitting test
EN 1771:2004/AC:2005 Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability and splitting test
EN 1799:1998 Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface
EN 1877-1:2000 Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent
EN 1877-2:2000 Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number
EN 1881:2006 Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method
CR 1901:1995 Regional Specifications and Recommendations for the avoidance of damaging alkali silica reactions in concrete
EN 12188:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents
EN 12189:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time
EN 12190:1998 Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar
EN 12192-1:2002 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar
EN 12192-2:1999 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents
EN 12350-1:2009 Testing fresh concrete - Part 1: Sampling
EN 12350-2:2009 Testing fresh concrete - Part 2: Slump-test
EN 12350-3:2009 Testing fresh concrete - Part 3: Vebe test
EN 12350-4:2009 Testing fresh concrete - Part 4: Degree of compactability
EN 12350-5:2009 Testing fresh concrete - Part 5: Flow table test
EN 12350-6:2009 Testing fresh concrete - Part 6: Density
EN 12350-7:2009 Testing fresh concrete - Part 7: Air content - Pressure methods
EN 12350-8:2010 Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test
EN 12350-9:2010 Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test
EN 12350-10:2010 Testing fresh concrete - Part 10: Self-compacting concrete - L box test
EN 12350-11:2010 Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test
EN 12350-12:2010 Testing fresh concrete - Part 12: Self-compacting concrete - J-ring test
EN 12390-1:2012 Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds
EN 12390-2:2009 Testing hardened concrete - Part 2: Making and curing specimens for strength tests
EN 12390-3:2009 Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 12390-3:2009/AC:2011 Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 12390-4:2000 Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines
EN 12390-5:2009 Testing hardened concrete - Part 5: Flexural strength of test specimens
EN 12390-6:2009 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
EN 12390-7:2009 Testing hardened concrete - Part 7: Density of hardened concrete
EN 12390-8:2009 Testing hardened concrete - Part 8: Depth of penetration of water under pressure
CEN/TS 12390-10:2007 Testing hardened concrete - Part 10: Determination of the relative carbonation resistance of concrete
EN 12390-11:2015 Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion
EN 12390-13:2013 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
EN 12504-1:2009 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
EN 12504-2:2012 Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number
EN 12504-3:2005 Testing concrete in structures - Part 3: Determination of pull-out force
EN 12504-4:2004 Testing concrete - Part 4: Determination of ultrasonic pulse velocity
EN 12614:2004 Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers
EN 12615:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength
EN 12617-1:2003 Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS)
EN 12617-2:2004 Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Shrinkage of ***** injection products based on polymer binder: volumetric shrinkage
EN 12617-3:2002 Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents
EN 12617-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion
EN 12618-1:2003 Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility
EN 12618-2:2004 Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with our without thermal cycling - Adhesion by tensile bond strength
EN 12618-3:2004 Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method
EN 12636:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete
EN 12637-1:2004 Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete
EN 12637-3:2003 Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers
EN 13057:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption
EN 13062:2003 Products and systems for the protection and repair of concrete structure - Test method - Determination of thixotropy of products for protection of reinforcement
EN 13263-1:2005+A1:2009 Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
EN 13263-2:2005+A1:2009 Silica fume for concrete - Part 2: Conformity evaluation
EN 13294:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time
EN 13295:2004 Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation
EN 13395-1:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars
EN 13395-2:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar
EN 13395-3:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete
EN 13395-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead
EN 13396:2004 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of chloride ion ingress
EN 13412:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
EN 13529:2003 Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack
EN 13577:2007 Chemical attack on concrete - Determination of aggressive carbon dioxide content in water
EN 13578:2003 Products and systems for the protection and repair of concrete structure - Test Method - Compatibility on wet concrete
EN 13579:2002 Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation
EN 13580:2002 Products and systems for the protection and repair of concrete structures - Test Methods - Water absorption and resistance to alkali for hydrophobic impregnations
EN 13581:2002 Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress
EN 13584:2003 Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products
EN 13670:2009 Execution of concrete structures
EN 13687-2:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock)
EN 13687-3:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact
EN 13687-4:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 4: Dry thermal cycling
EN 13687-5:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock
EN 13733:2002 Products and systems for the protection and repair of concrete structures - Tests methods - Determination of the durability of structural bonding agents
EN 13791:2007 Assessment of in-situ compressive strength in structures and precast concrete components
EN 13894-1:2003 Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 1: During cure
EN 13894-2:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 2: After hardening
CR 13901:2000 The use of the concept of concrete families for the production and conformity control of concrete
CR 13902:2000 Test methods for determining the water/cement ratio of fresh concrete
EN 14068:2003 Products and systems for the protection and repair of concrete structures - Test methods - Determination of watertightness of injected *****s without movement in concrete
EN 14117:2004 Products systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products
EN 14406:2004 Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution
EN 14487-1:2005 Sprayed concrete - Part 1: Definitions, specifications and conformity
EN 14487-2:2006 Sprayed concrete - Part 2: Execution
EN 14488-1:2005 Testing sprayed concrete - Sampling fresh and hardened concrete
EN 14488-2:2006 Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete
EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
EN 14488-4:2005+A1:2008 Testing sprayed concrete - Part 4: Bond strength of cores by direct tension
EN 14488-5:2006 Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens
EN 14488-6:2006 Testing sprayed concrete - Part 6: Thickness of concrete on a substrate
EN 14488-7:2006 Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete
EN 14497:2004 Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability
EN 14497:2004/AC:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability
EN 14498:2004 Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles
EN 14629:2007 Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete
EN 14630:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method
CEN/TS 14754-1:2007 Curing compounds - Test methods - Part 1: Determination of water retention efficiency of common curing compounds
EN 14845-1:2007 Test methods for fibres in concrete - Part 1: Reference concretes
EN 14845-2:2006 Test methods for fibres in concrete - Part 2: Effect on concrete
EN 14889-1:2006 Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity
EN 14889-2:2006 Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity
EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation
EN 15183:2006 Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test
EN 15184:2006 Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test)
CEN/TR 15677:2008 Fly ash obtained from co-combustion - A report on the situation in Europe
CEN/TR 15840:2009 Evaluation of conformity of fly ash for concrete - Guidelines for the application of EN 450-2
CEN/TR 15868:2009 Survey of national requirements used in conjunction with EN 206-1:2000
CEN/TR 16349:2012 Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete
CEN/TR 16369:2012 Use of control charts in the production of concrete
CEN/TR 16443:2013 Backgrounds to the revision of EN 450-1:2005+A1:2007 - Fly ash for concrete
EN 16502:2014 Test method for the determination of the degree of soil acidity according to Baumann-Gully
CEN/TR 16563:2013 Principles of the equivalent durability procedure
EN 16622:2015 Silica-calcium fume for concrete - Definitions, requirements and conformity criteria
CEN/TR 16639:2014 Use of k-value concept, equivalent concrete performance concept and equivalent performance of combinations concept
missing:
EN 934-6:2001/A1:2005 Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity - missing A1:2005
CR 1901:1995 Regional Specifications and Recommendations for the avoidance of damaging alkali silica reactions in concrete - missing standard
CR 13901:2000 The use of the concept of concrete families for the production and conformity control of concrete - missing standard
CR 13902:2000 Test methods for determining the water/cement ratio of fresh concrete - missing standard
EN 14497:2004/AC:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability - missing AC:2006
CEN/TR 15677:2008 Fly ash obtained from co-combustion - A report on the situation in Europe - missing standard
linkz:
[link Point to another website Only the registered members can access]
Reply With Quote
Bookmarks