CEN Standars Collection 63/370: CEN SS M11 - Powder Metallurgy

[BornToSin]

3 are missing:

EN ISO 2738:1999 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999)
EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012)
EN ISO 2740:2009 Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2009)
EN ISO 3252:2000 Powder metallurgy - Vocabulary (ISO 3252:1999)
EN ISO 3325:1999 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996)
EN ISO 3325:1999/A1:2002 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996)
EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength (ISO 3327:2009)
EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006)
EN ISO 3738-1:2010 Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982)
EN ISO 3738-2:2006 Hardmetals - Rockwell hardness test (scale A) - Part 2: Preparation and calibration of standard test blocks (ISO 3738-2:1988)
EN ISO 3907:2009 Hardmetals - Determination of total carbon - Gravimetric method (ISO 3907:2009)
EN ISO 3908:2009 Hardmetals - Determination of insoluble (free) carbon - Gravimetric method (ISO 3908:2009)
EN ISO 3923-1:2010 Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2008)
EN ISO 3927:2011 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2011)
EN ISO 3928:2006 Sintered metal materials, excluding hardmetals - Fatigue test pieces (ISO 3928:1999)
EN ISO 3953:2011 Metallic powders - Determination of tap density (ISO 3953:2011)
EN ISO 3954:2007 Powders for powder metallurgical purposes - Sampling (ISO 3954:2007)
EN ISO 4022:2006 Permeable sintered metal materials - Determination of fluid permeability (ISO 4022:1987)
EN ISO 4490:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2014) - missing VE
EN ISO 4491-2:1999 Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:1997)
EN ISO 4491-3:2006 Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen (ISO 4491-3:1997)
EN ISO 4491-4:2013 Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction (ISO 4491-4:2013)
EN ISO 4492:2013 Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2013)
EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
EN ISO 4499-1:2010 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2008)
EN ISO 4499-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2008)
EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000)
EN ISO 5755:2012 Sintered metal materials - Specifications (ISO 5755:2012)
EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
EN ISO 11876:2010 Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010)
EN ISO 13517:2013 Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2013)
EN ISO 13944:2012 Lubricated metal-powder mixes - Determination of lubricant content - Soxhlet extraction method (ISO 13944:2012)
EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)
EN 23312:1993 Sintered metal materials and hardmetals - Determination of Young modulus (ISO 3312:1987)
EN 23878:1993 Hardmetals - Vickers hardness test (ISO 3878:1983)
EN 23909:1993 Hardmetals - Determination of cobalt - Potentiometric method (ISO 3909:1976)
EN 23923-2:1993 Metallic powders - Determination of apparent density - Part 2: Scott volumeter method (ISO 3923-2:1981)
EN 23995:1993 Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:1985) - missing
EN 24003:1993 Permeable sintered metal materials - Determination of bubble test pore size (ISO 4003:1977)
EN 24489:1993 Sintered hardmetals - Sampling and testing (ISO 4489:1978)
EN 24491-1:1993 Metallic powders - Determination of oxygen content by reduction methods - Part 1: General guidelines (ISO 4491-1:1989)
EN 24496:1993 Metallic powders - Determination of acid insoluble content in iron, copper, tin and bronze powders (ISO 4496:1978)
EN 24497:1993 Metallic powders - Determination of particle size by dry sieving (ISO 4497:1983)
EN 24501:1993 Hardmetals - Determination of titanium - Photometric peroxide method (ISO 4501:1978)
EN 24503:1993 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method (ISO 4503:1978) - missing
EN 24505:1993 Hardmetals - Metallographic determination of porosity and uncombined carbon (ISO 4505:1978)
EN 24506:1993 Hardmetals - Compression test (ISO 4506:1979)
EN 24883:1993 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Solution method (ISO 4883:1978)
EN 24884:1993 Hardmetals - Sampling and testing of powders using sintered test pieces (ISO 4884:1978)
EN 25754:1993 Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:1978)
EN 27627-1:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 1: General requirements (ISO 7627-1:1983)
EN 27627-2:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 2: Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) (ISO 7627-2:1983)
EN 27627-3:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 3: Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m) (ISO 7627-3:1983)
EN 27627-4:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 4: Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m) (ISO 7627-4:1983)
EN 27627-5:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) (ISO 7627-5:1983)
EN 27627-6:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 6: Determination of chromium in contents from 0,01 to 2 % (m/m) (ISO 7627-6:1985)

[link Point to another website Only the registered members can access]
or

[link Point to another website Only the registered members can access]

[BornToSin]

update:
EN ISO 2738:1999 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999) - better quality
EN ISO 2740:2009 Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2009) - better quality
EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength (ISO 3327:2009) - EN version
EN ISO 3907:2009 Hardmetals - Determination of total carbon - Gravimetric method (ISO 3907:2009) - EN version
EN ISO 4499-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2008) - better quality
EN ISO 11876:2010 Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010) - better quality
EN ISO 13517:2013 Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2013) - better quality
EN ISO 13944:2012 Lubricated metal-powder mixes - Determination of lubricant content - Soxhlet extraction method (ISO 13944:2012) - better quality
EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) - EN version


missing are:
EN ISO 4490:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2014)
EN ISO 4499-3:2016 Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals (ISO 4499-3:2016)
EN ISO 4499-4:2016 Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content (ISO 4499-4:2016)
EN 23995:1993 Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:1985)
EN 24503:1993 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method (ISO 4503:1978)

[link Point to another website Only the registered members can access] or

[link Point to another website Only the registered members can access]

[BornToSin]

update:

EN ISO 4490:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2014) - added missing standard
EN ISO 4499-3:2016 Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals (ISO 4499-3:2016) - added missing standard
EN ISO 4499-4:2016 Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content (ISO 4499-4:2016) - added missing standard


missing list:
EN 23995:1993 Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:1985)
EN 24503:1993 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method (ISO 4503:1978)

[link Point to another website Only the registered members can access]
or

[link Point to another website Only the registered members can access]

[BornToSin]

update:

EN 23995:1993 Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:1985) - added missing standard
EN 24503:1993 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method (ISO 4503:1978) - added missing standard

sector complete

[link Point to another website Only the registered members can access]
or

[link Point to another website Only the registered members can access]

[BornToSin]

update:

EN ISO 3908:2009 Hardmetals - Determination of insoluble (free) carbon - Gravimetric method (ISO 3908:2009) - EN version
EN ISO 3954:2007 Powders for powder metallurgical purposes - Sampling (ISO 3954:2007) - EN version


sector still complete

links:

[link Point to another website Only the registered members can access]
or

[link Point to another website Only the registered members can access]

[BornToSin]

update:

better quality of:

EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012)
EN ISO 3927:2011 Metallic powders* excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2011)
EN ISO 3953:2011 Metallic powders - Determination of tap density (ISO 3953:2011)
EN ISO 4490:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2014)
EN ISO 4491-4:2013 Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction (ISO 4491-4:2013)
EN ISO 4492:2013 Metallic powders* excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2013)
EN ISO 4498:2010 Sintered metal materials* excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
EN ISO 4499-1:2010 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2008)
EN ISO 4499-3:2016 Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C* N) and WC/cubic carbide based hardmetals (ISO 4499-3:2016)
EN ISO 4499-4:2016 Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity* carbon defects and eta-phase content (ISO 4499-4:2016)
EN ISO 5755:2012 Sintered metal materials - Specifications (ISO 5755:2012)
EN ISO 7625:2012 Sintered metal materials* excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)


EN version of:

EN ISO 3923-1:2010 Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2008)


new edition of:

EN ISO 3928:2016 Sintered metal materials* excluding hardmetals - Fatigue test pieces (ISO 3928:2016)

sector complete

[link Point to another website Only the registered members can access]
or

[link Point to another website Only the registered members can access]

[BornToSin]

no changes* new link:

[link Point to another website Only the registered members can access]

[BornToSin]

update:

better quality or EN versions:

EN ISO 3325:1999 Sintered metal materials* excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996)
EN ISO 3325:1999/A1:2002 Sintered metal materials* excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996)
EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006)
EN ISO 3738-1:2010 Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982)
EN ISO 3738-2:2006 Hardmetals - Rockwell hardness test (scale A) - Part 2: Preparation and calibration of standard test blocks (ISO 3738-2:1988)
EN 23878:1993 Hardmetals - Vickers hardness test (ISO 3878:1983)
EN 23909:1993 Hardmetals - Determination of cobalt - Potentiometric method (ISO 3909:1976)
EN 23923-2:1993 Metallic powders - Determination of apparent density - Part 2: Scott volumeter method (ISO 3923-2:1981)
EN 23995:1993 Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:1985)
EN 24489:1993 Sintered hardmetals - Sampling and testing (ISO 4489:1978)
EN 24496:1993 Metallic powders - Determination of acid insoluble content in iron* copper* tin and bronze powders (ISO 4496:1978)
EN 24497:1993 Metallic powders - Determination of particle size by dry sieving (ISO 4497:1983)
EN 24501:1993 Hardmetals - Determination of titanium - Photometric peroxide method (ISO 4501:1978)
EN 24503:1993 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method (ISO 4503:1978)
EN 24505:1993 Hardmetals - Metallographic determination of porosity and uncombined carbon (ISO 4505:1978)
EN 24883:1993 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Solution method (ISO 4883:1978)
EN 24884:1993 Hardmetals - Sampling and testing of powders using sintered test pieces (ISO 4884:1978)
EN 25754:1993 Sintered metal materials* excluding hardmetals - Unnotched impact test piece (ISO 5754:1978)
EN 27627-1:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 1: General requirements (ISO 7627-1:1983)
EN 27627-2:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 2: Determination of calcium* potassium* magnesium and sodium in contents from 0*001 to 0*02 % (m/m) (ISO 7627-2:1983)
EN 27627-3:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 3: Determination of cobalt* iron* manganese and nickel in contents from 0*01 to 0*5 % (m/m) (ISO 7627-3:1983)
EN 27627-4:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 4: Determination of molybdenum* titanium and vanadium in contents from 0*01 to 0*5 % (m/m) (ISO 7627-4:1983)
EN 27627-5:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 5: Determination of cobalt* iron* manganese* molybdenum* nickel* titanium and vanadium in contents from 0*5 to 2 % (m/m) (ISO 7627-5:1983)
EN 27627-6:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 6: Determination of chromium in contents from 0*01 to 2 % (m/m) (ISO 7627-6:1985)


still nothing missing here

[link Point to another website Only the registered members can access]

[BornToSin]

full list 27.10.2017:

EN ISO 2738:1999 Sintered metal materials* excluding hardmetals - Permeable sintered metal materials - Determination of density* oil content and open porosity (ISO 2738:1999)
EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012)
EN ISO 2740:2009 Sintered metal materials* excluding hardmetals - Tensile test pieces (ISO 2740:2009)
EN ISO 3252:2000 Powder metallurgy - Vocabulary (ISO 3252:1999)
EN ISO 3325:1999 Sintered metal materials* excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996)
EN ISO 3325:1999/A1:2002 Sintered metal materials* excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996)
EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength (ISO 3327:2009)
EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006)
EN ISO 3738-1:2010 Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982)
EN ISO 3738-2:2006 Hardmetals - Rockwell hardness test (scale A) - Part 2: Preparation and calibration of standard test blocks (ISO 3738-2:1988)
EN ISO 3907:2009 Hardmetals - Determination of total carbon - Gravimetric method (ISO 3907:2009)
EN ISO 3908:2009 Hardmetals - Determination of insoluble (free) carbon - Gravimetric method (ISO 3908:2009)
EN ISO 3923-1:2010 Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2008)
EN ISO 3927:2017 Metallic powders* excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2017)
EN ISO 3928:2016 Sintered metal materials* excluding hardmetals - Fatigue test pieces (ISO 3928:2016)
EN ISO 3953:2011 Metallic powders - Determination of tap density (ISO 3953:2011)
EN ISO 3954:2007 Powders for powder metallurgical purposes - Sampling (ISO 3954:2007)
EN ISO 4022:2006 Permeable sintered metal materials - Determination of fluid permeability (ISO 4022:1987)
EN ISO 4490:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2014)
EN ISO 4491-2:1999 Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:1997)
EN ISO 4491-3:2006 Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen (ISO 4491-3:1997)
EN ISO 4491-4:2013 Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction (ISO 4491-4:2013)
EN ISO 4492:2013 Metallic powders* excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:2013)
EN ISO 4498:2010 Sintered metal materials* excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
EN ISO 4499-1:2010 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2008)
EN ISO 4499-2:2010 Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size (ISO 4499-2:2008)
EN ISO 4499-3:2016 Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C* N) and WC/cubic carbide based hardmetals (ISO 4499-3:2016)
EN ISO 4499-4:2016 Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity* carbon defects and eta-phase content (ISO 4499-4:2016)
EN ISO 4496:2017 Metallic powders - Determination of acid-insoluble content in iron* copper* tin and bronze powders (ISO 4496:2017)
EN ISO 4507:2007 Sintered ferrous materials* carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000)
EN ISO 5755:2012 Sintered metal materials - Specifications (ISO 5755:2012)
EN ISO 7625:2012 Sintered metal materials* excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
EN ISO 11876:2010 Hardmetals - Determination of calcium* copper* iron* potassium* magnesium* manganese* sodium* nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010)
EN ISO 13517:2013 Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2013)
EN ISO 13944:2012 Lubricated metal-powder mixes - Determination of lubricant content - Soxhlet extraction method (ISO 13944:2012)
EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)
EN 23312:1993 Sintered metal materials and hardmetals - Determination of Young modulus (ISO 3312:1987)
EN 23878:1993 Hardmetals - Vickers hardness test (ISO 3878:1983)
EN 23909:1993 Hardmetals - Determination of cobalt - Potentiometric method (ISO 3909:1976)
EN 23923-2:1993 Metallic powders - Determination of apparent density - Part 2: Scott volumeter method (ISO 3923-2:1981)
EN 23995:1993 Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:1985)
EN 24003:1993 Permeable sintered metal materials - Determination of bubble test pore size (ISO 4003:1977)
EN 24489:1993 Sintered hardmetals - Sampling and testing (ISO 4489:1978)
EN 24491-1:1993 Metallic powders - Determination of oxygen content by reduction methods - Part 1: General guidelines (ISO 4491-1:1989)
EN 24496:1993 Metallic powders - Determination of acid insoluble content in iron* copper* tin and bronze powders (ISO 4496:1978)
EN 24497:1993 Metallic powders - Determination of particle size by dry sieving (ISO 4497:1983)
EN 24501:1993 Hardmetals - Determination of titanium - Photometric peroxide method (ISO 4501:1978)
EN 24503:1993 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method (ISO 4503:1978)
EN 24505:1993 Hardmetals - Metallographic determination of porosity and uncombined carbon (ISO 4505:1978)
EN 24506:1993 Hardmetals - Compression test (ISO 4506:1979)
EN 24883:1993 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Solution method (ISO 4883:1978)
EN 24884:1993 Hardmetals - Sampling and testing of powders using sintered test pieces (ISO 4884:1978)
EN 25754:1993 Sintered metal materials* excluding hardmetals - Unnotched impact test piece (ISO 5754:1978)
EN 27627-1:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 1: General requirements (ISO 7627-1:1983)
EN 27627-2:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 2: Determination of calcium* potassium* magnesium and sodium in contents from 0*001 to 0*02 % (m/m) (ISO 7627-2:1983)
EN 27627-3:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 3: Determination of cobalt* iron* manganese and nickel in contents from 0*01 to 0*5 % (m/m) (ISO 7627-3:1983)
EN 27627-4:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 4: Determination of molybdenum* titanium and vanadium in contents from 0*01 to 0*5 % (m/m) (ISO 7627-4:1983)
EN 27627-5:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 5: Determination of cobalt* iron* manganese* molybdenum* nickel* titanium and vanadium in contents from 0*5 to 2 % (m/m) (ISO 7627-5:1983)
EN 27627-6:1993 Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 6: Determination of chromium in contents from 0*01 to 2 % (m/m) (ISO 7627-6:1985)


complete

[link Point to another website Only the registered members can access]