maximum oscillation (electrode)

[IS.N2]

Can anyone help me?

Where and on which standard is explained in the text on the maximum oscillation of the electrode which is 3 times??

and what is the maximum oscillation of the width of the weld for GMAW and FCAW?? and which standard is written.

Please help me with this

[IS.N2]

Also please ask any member can help me in doubt.

thank you

[Nabilia]

oscillation (traverse speed, length, and dwell time)

Your limitations are based on your approved weld procedure

from AWS D1.1/D1.1M:2010 page 146
Table 4.7 PQR Essential Variable Changes Requiring WPS Requalification for ESW or EGW
Filler Metal Oscillation
6) A change in oscillation traverse speed> 10 ipm (4 mm/s)
7) A change in oscillation traverse dwell time> 2 seconds (except as necessary to compensate for joint opening variations)
8) A change in oscillation traverse length which affects by more than 1/8 in [3 mm], the proximity of filler metal to the molding shoes

[IS.N2]

thank you