ASM Code /American Society for Metals

[Mohamed]

ASM Code

American Society for Metals

During the 1920s, it was clear that the need for reliable technical information extended beyond the field of steel treating alone. Alloying during the manufacture of steel was becoming more important, and the quality and treatment of nonferrous metals began to attract the attention of engineers.
To meet the requirements of the membership, ASST began to expand its field to include the complete range of manufacturing processes for all metals. By 1933, convinced of the members’ support for a more inclusive name, the ASST became American Society for Metals (ASM), with Bill Eisenman serving as National Secretary.
Over the next several decades, ASM’s membership and the number of chapters greatly expanded, as did the Society’s services to its members. Metal Progress magazine (now Advanced Materials & Processes) debuted in September 1930 and quickly became known as the preeminent technical publication in the metals field.
By 1948, the Seventh Edition of the Metals Handbook had grown to 1,444 pages. It was the last single-volume Handbook, until the publication of the first Metals Handbook Desk Edition in 1984.

ASM Code
American Society for Metals

Volume 1: Properties and Selection: Irons, Steels, and High-Performance Alloys 50.1Mb

[link Point to another website Only the registered members can access]
Volume 2: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials 58.87Mb

[link Point to another website Only the registered members can access] Volume 3: Alloy Phase Diagrams 66.35Mb

[link Point to another website Only the registered members can access] Volume 4: Heat Treating 44.43Mb

[link Point to another website Only the registered members can access] Volume 5: Surface Engineering 29.06Mb

[link Point to another website Only the registered members can access] Volume 6: Welding, Brazing, and Soldering 43.83Mb

[link Point to another website Only the registered members can access] Volume 7: Powder Metal Technologies and Applications 55.74Mb

[link Point to another website Only the registered members can access] Volume 8: Mechanical Testing and Evaluation 57.04Mb

[link Point to another website Only the registered members can access] Volume 9: Metallography and Microstructures
95.78Mb , 95.78Mb , 43.64Mb
Part 1

[link Point to another website Only the registered members can access] Part 2

[link Point to another website Only the registered members can access] Part 3

[link Point to another website Only the registered members can access] Volume 10: Materials Characterization 17.98Mb

[link Point to another website Only the registered members can access] Volume 11: Failure Analysis and Prevention
95.78Mb , 93.73Mb
Part 1

[link Point to another website Only the registered members can access] Part 2

[link Point to another website Only the registered members can access] Volume 12: Fractography 66.06Mb

[link Point to another website Only the registered members can access] Volume 13A: Corrosion: Fundamentals, Testing, and Protection 74.3Mb

[link Point to another website Only the registered members can access] Volume 13: Corrosion 66.67Mb

[link Point to another website Only the registered members can access] Volume 14: Forming and Forging 52.84Mb

[link Point to another website Only the registered members can access] Volume 15: Casting 46.47Mb

[link Point to another website Only the registered members can access] Volume 16: Machining
95.78Mb , 87.16Mb
Part 1

[link Point to another website Only the registered members can access] Part 2

[link Point to another website Only the registered members can access] Volume 17: Nondestructive Evaluation and Quality Control 41.97Mb

[link Point to another website Only the registered members can access] Volume 18: Friction, Lubrication, and Wear Technology 37.18Mb

[link Point to another website Only the registered members can access] Volume 19: Fatigue And Fracture 46.3Mb

[link Point to another website Only the registered members can access] Volume 20: Materials Selection and Design 29.58Mb

[link Point to another website Only the registered members can access] Volume 21: Composites 96.59Mb

[link Point to another website Only the registered members can access]

[ketan_er13]

Dear,

I am unable to download volume no 14.
It shows that the file is not found.
I think it is deleted.
Can you please upload it again.

ketan

[Skavenses]

All links unavailable can you reupload it... Thanks in advance.

[bkcdm]

I am also not able to download any above files.

[moad]

Dear>

sorry not found any thing

[inconel]

Boss,pls upload the files again.links not working.
Rgds
inconel

[rameez787]

can you send me the link for ... ASM HANDBOOK VOLUME 9 ....my ID is

rameez787@hotmail.com

none of the links are working

[adeegbemode]

Thanks this is quite helpful but can anybody help define wcb, wpb, thanks

[pedroc]

Dear Mohamed,
I would like to download ASM Handbooks Volumes 11, 13 and 20 but the links you provided are not working.
Could you please update some links for these Handbooks, or at least for volume 11?
Thank you very much in advance.
Kind regards,

[nautel]

All Link die, please upload again !

ASM Code

American Society for Metals

During the 1920s, it was clear that the need for reliable technical information extended beyond the field of steel treating alone. Alloying during the manufacture of steel was becoming more important, and the quality and treatment of nonferrous metals began to attract the attention of engineers.
To meet the requirements of the membership, ASST began to expand its field to include the complete range of manufacturing processes for all metals. By 1933, convinced of the members’ support for a more inclusive name, the ASST became American Society for Metals (ASM), with Bill Eisenman serving as National Secretary.
Over the next several decades, ASM’s membership and the number of chapters greatly expanded, as did the Society’s services to its members. Metal Progress magazine (now Advanced Materials & Processes) debuted in September 1930 and quickly became known as the preeminent technical publication in the metals field.
By 1948, the Seventh Edition of the Metals Handbook had grown to 1,444 pages. It was the last single-volume Handbook, until the publication of the first Metals Handbook Desk Edition in 1984.

ASM Code
American Society for Metals

Volume 1: Properties and Selection: Irons, Steels, and High-Performance Alloys 50.1Mb

[link Point to another website Only the registered members can access] Volume 2: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials 58.87Mb

[link Point to another website Only the registered members can access] Volume 3: Alloy Phase Diagrams 66.35Mb

[link Point to another website Only the registered members can access] Volume 4: Heat Treating 44.43Mb

[link Point to another website Only the registered members can access] Volume 5: Surface Engineering 29.06Mb

[link Point to another website Only the registered members can access] Volume 6: Welding, Brazing, and Soldering 43.83Mb

[link Point to another website Only the registered members can access] Volume 7: Powder Metal Technologies and Applications 55.74Mb

[link Point to another website Only the registered members can access] Volume 8: Mechanical Testing and Evaluation 57.04Mb

[link Point to another website Only the registered members can access] Volume 9: Metallography and Microstructures
95.78Mb , 95.78Mb , 43.64Mb
Part 1

[link Point to another website Only the registered members can access] Part 2

[link Point to another website Only the registered members can access] Part 3

[link Point to another website Only the registered members can access] Volume 10: Materials Characterization 17.98Mb

[link Point to another website Only the registered members can access] Volume 11: Failure Analysis and Prevention
95.78Mb , 93.73Mb
Part 1

[link Point to another website Only the registered members can access] Part 2

[link Point to another website Only the registered members can access] Volume 12: Fractography 66.06Mb

[link Point to another website Only the registered members can access] Volume 13A: Corrosion: Fundamentals, Testing, and Protection 74.3Mb

[link Point to another website Only the registered members can access] Volume 13: Corrosion 66.67Mb

[link Point to another website Only the registered members can access] Volume 14: Forming and Forging 52.84Mb

[link Point to another website Only the registered members can access] Volume 15: Casting 46.47Mb

[link Point to another website Only the registered members can access] Volume 16: Machining
95.78Mb , 87.16Mb
Part 1

[link Point to another website Only the registered members can access] Part 2

[link Point to another website Only the registered members can access] Volume 17: Nondestructive Evaluation and Quality Control 41.97Mb

[link Point to another website Only the registered members can access] Volume 18: Friction, Lubrication, and Wear Technology 37.18Mb

[link Point to another website Only the registered members can access] Volume 19: Fatigue And Fracture 46.3Mb

[link Point to another website Only the registered members can access] Volume 20: Materials Selection and Design 29.58Mb

[link Point to another website Only the registered members can access] Volume 21: Composites 96.59Mb

[link Point to another website Only the registered members can access]

[chz]

It's a good material but links are die ... bad luck !!!

... by the way thanks for the intention ...

[inconel]

please upload the book again.We need it.it is highly informative and valuable.Please upload again.