Aspen V7 license probelm

[Speereht]

Hi;

You have to use the license generator for Aspen 2006.5, but it will take some minutes, you have to be patient. After that follow the c***k installation notes.
If you have more problems, please write here a new post.

Speereht.

Hi Guys,

I cannot use Hysys after installing Aspen V7, it shows 'unable to find process license' and 'could not get the applicaiton license'.

I do try licgen for aspen 2006.5, however, commuter license remaining is shown as 0.

please help! urgent basis...

thx

[adit]

Hi;

You have to use the license generator for Aspen 2006.5, but it will take some minutes, you have to be patient. After that follow the c***k installation notes.
If you have more problems, please write here a new post.

Speereht.

Hi Speereht,

Could you share the license generator for Aspen 2006.5.
Thanks for your help.

[kedar12mati]

I cannot use Hysys after installing Aspen V6, it shows 'unable to find process license' and 'could not get the applicaiton license'.
I have license generator but still it's not working
plz help

[DIEGODIMATE]

1. What windows version are you using? for vesion 64 bit special crak you have to use
2. Its better to install aspen V7 i had problems in V2006.5 in Hidraulics and gas plants dont converge solutions that converge in 3.2.
3. Follow the instrucctions posted in this forum to install but i recomend that install v7.

atentamente

[marchese85]

hello world
I'm trying to install instead Aspen Engineering Suite V2006 but without the desired suggestions. Reading through the posts I saw that someone had my same problem. the program seems installed (during installation exit is a page that requires a password but I left it blank) but will not start. The license keys were generated with aspen gen lic.exe but appear the following errors:

SORRY, FATAL ERROR FOR LICENSING ASPEN PLUS

Server: Error_while_checking_out_license (AEA_Aspen Plus) "returned error:" SLM Configuration Information "
Server: "No Net (default-SLM)" "returned error 18.The license for this product or feature could not be found. Be sure you are pointing to the correct license file or the license server is configured properly.
Appear similar to three errors (default-AET) and (default, AEA)
can someone send me the procedure to recognize the licenses and c-----d installation notes???
I think the generic license must be copied to some folder. but what??

my email is xx.salvo@hotmail.it

Thank you in advance
best regards
p.s sorry for my english

[zinokabyl]

Hello everybody hopping that everyone is doing well
Firts I've installed AspenTech V7.1 just recently and in reality I'm not an informatician
but I give a help according to my experience
- Read carefully the steps of the installation guide users PDF book you can find it on the net easily Aspen Engineering Suite V7.2 in the PDF format.
- Befor installing desactivate your antivirus, and check your PC CPU capacity, disk free space ........etc
- Start the standard installation mode.
- You've to be patience during the installation especailly when the SLM (Licence servor manager is running because it takes much time)
- finally just fellow the steps of installation I swear the istallation is easy.
Good luck for everyone friends
zinokabyl
from algeria
salem

[eng-s.banoei]

can you help me?

i can not use ASPEN HYSYS 2006 after installing it show this erorr...unable to acquire AEA HYSYS process licence