update:

EN 754-2:2013 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties - EN version
EN 1676:2010 Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications - EN version
EN 1706:2010 Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties - EN version
EN ISO 2085:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2010) - EN version
EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2011) - EN version
EN ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010) - EN version
EN ISO 2143:2010 Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2010) - EN version
EN ISO 2931:2010 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2010) - EN version
EN ISO 3210:2010 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution (ISO 3210:2010) - EN version
EN ISO 3211:2010 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to *****ing by deformation (ISO 3211:2010) - EN version
EN ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010) - EN version
EN ISO 6581:2010 Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2010) - EN version
EN ISO 7599:2010 Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium (ISO 7599:2010) - EN version
EN ISO 7668:2010 Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees (ISO 7668:2010) - EN version
EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO/FDIS 7759:2010) - EN version
EN ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2011) - EN version
EN ISO 8994:2011 Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2011) - EN version
EN 13195:2013 Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) - EN version


missing list:

EN 485-1:2016 Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
EN 485-2:2016 Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
EN 754-7:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form
EN 754-8:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form
EN 755-1:2016 Aluminium and aluminium alloys- Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
EN 755-7:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form
EN 755-8:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form
EN 755-9:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form


links:


[link Point to another website Only the registered members can access]
or

[link Point to another website Only the registered members can access]