Paladin Design Base Full and Free

[fx007]

Installation Steps would be:

1- Install “SMAC 2.0” software on your computer. ( I shall also give you the link for this software)
2- Once installed SMAC software, generate its serial from the ----- folder and make this software active.
3- Run this software and change the MAC address of your computer. ( I shall provide you the correct MAC address along with matching .lic file for EDSA).
4- Download the Design Base software and install it on your computer.
5- Then copy the .lic file and paste it under “C:\Design Base5\config
6- Go to start, All Programs, Paladin Design Base, and click on “Rebuild Paladin Design Base Toolbar”.
7- After that you can run the program from the Design Base Icon on Desktop normally.
Here is the link for SMAC software to change the MAC address.

[link Point to another website Only the registered members can access]

Run this software and change the MAC address of your computer as per the following:

2C 76 8A B0 29 62 and click update MAC. The software will change the MAC of your computer. After that restart your computer.

And Install EDSA Paladin Design Base software.

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]
License:

[link Point to another website Only the registered members can access]
Enjoy

[tyenfi]

dear fx007，the License's links :

[link Point to another website Only the registered members can access]

[tyenfi]

dear fx0007
this is the message from filetea's link:
Sorry, but the content you are requesting cannot be found.
FileTea does not stores files in the server. They are only available while FileTea page is opened in the browser.
If you are trying to download a file, it is possible that the owner removed it already, or simply closed the page.

[tyenfi]

dear fx0007
this is the message from filetea's link:
Sorry, but the content you are requesting cannot be found.
FileTea does not stores files in the server. They are only available while FileTea page is opened in the browser.
If you are trying to download a file, it is possible that the owner removed it already, or simply closed the page.

[fx007]

Try this link:

[link Point to another website Only the registered members can access]

[tyenfi]

dear fx007,the link:

[link Point to another website Only the registered members can access] or send Paladin.lic file to my mail: 1037387085@qq.com or tanyong0965@sina.com? so many thanks to you!

[tyenfi]

dear fx007,the link:

[link Point to another website Only the registered members can access] or send Paladin.lic file to my mail: 1037387085@qq.com or tanyong0965@sina.com? so many thanks to you!

[tyenfi]

dear fx007, you also can share the Paladin.lic file's content to this forum. thanks!

[surgeArrester]

Installation Steps would be:

1- Install “SMAC 2.0” software on your computer. ( I shall also give you the link for this software)
2- Once installed SMAC software, generate its serial from the ----- folder and make this software active.
3- Run this software and change the MAC address of your computer. ( I shall provide you the correct MAC address along with matching .lic file for EDSA).
4- Download the Design Base software and install it on your computer.
5- Then copy the .lic file and paste it under “C:\Design Base5\config
6- Go to start, All Programs, Paladin Design Base, and click on “Rebuild Paladin Design Base Toolbar”.
7- After that you can run the program from the Design Base Icon on Desktop normally.
Here is the link for SMAC software to change the MAC address.

[link Point to another website Only the registered members can access]
Run this software and change the MAC address of your computer as per the following:

2C 76 8A B0 29 62 and click update MAC. The software will change the MAC of your computer. After that restart your computer.

And Install EDSA Paladin Design Base software.

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]
License:

[link Point to another website Only the registered members can access]
Enjoy

in step one, you can also use tmac.. a software to change the mac address.. and it is free..

[link Point to another website Only the registered members can access] tmac/


with this you can change your mac address restore it without computer restarts..

[sedianpo]

after following the procedures and installing the software, the licence manager says that hostid of the computer doesnt not match the host id, please help

[surgeArrester]

after following the procedures and installing the software, the licence manager says that hostid of the computer doesnt not match the host id, please help

I don't believe it. Maybe you didn't configure SMAC or TMAC to match host id.

[mahfouz]

dear fx007 I get your lic and it worked perfectly for me , but I have ver 5 not 5.1 SP1
your fileom links not work
Plz send new links for 5.1 SP1 version