vinomarky
Very Active Member

hi, vinomarky:

I have a thread about "relative permeability curve of fracture", http://www.egpet.net/vb/threads/60577-About-Relative-Permeability-Curves-of-Fractures-(naturally-fracture-reservoirs-)

could you give me some suggestion? Thanks very much!

any suggestions how QC a scaled up structure and properties..

could you please help me if there is any VBA macro to generate relative permeability curve based on Corey correlation for oil- water-gas system to be used in reservoir simulation throug change parameters, i.e. end point, etc. to match my simulation or field data.

thank you in advance

could you please help me .I have been worked on Eclipse model three phase G/O/W and I got good history match as a field basis also good history match as individual wells except one well that has been drilled in gas cap .As per the model gas cap well should be produce gas for some period and then turn to produce oil due to swap oil to gas gap but actually this well still produce gas up to now. I would like to get good history match in this well to delay oil produce in the model for some period without any effect on the history match of the other wells could you please to suggest any idea to modified any properties in the model to get good HM .

Can you help me ?when we shut in small producer well about 15 bbl/d and wc 90% for somedays about 3 days and when we restarst this well on production we notes that well produced 100% water and we noted also that the adjacent wells increase in wc about 10% the formation is sand.
what is the reasons behind this?

ITS POSTED IN FORUM TOO:

PETROPHYSICAL MODELING IN PETREL - PERMEABILITY PROPERTY

PLEASE I NEED TO CREATE PROPERTY OF PERMEABILITY DATA FROM CORE DATA.
I THINK THAT IS WITH A FUNCTION XY LOG NORMAL X=K LOG ESC Y = POROSITY NORMAL ESC.

IF ANYONE CAN HELP WITH WORKFLOW.
THANKS IN ADVANCE.
I HOPE YOUR HELP.

pmaldini85@hotmail.com

......
10 26.58 21.10
15 24.83 20.61
25 23.20 20.17
40 21.99 19.89
60 21.15 19.8
80 20.55 19.75
100 20.12 19.73
120 19.72 19.72

thanks in advance

DRAINAGE IMBIBITION depth: 932.2 m
PC SHG D HG
KG/CM2 % %
0.03 100
0.09 100
0.18 99.43
0.38 85.18
0.63 63.89
0.88 54.38
1.03 51.43 25.66
1.30 47.46 25.34
1.5 45.12 25.07
2 40.70 24.08
3 35.84 23.25
4 32.86 22.58
5 30.88 22.12
7.5 28.13 21.51

PLEASE I HAVE THIS DATA:
DEPTH: 932.3 m
I need convert to Height vs Sw for work with the petrel function xy aplication.
please can you explain me one workflow to solve my problem.
PC aplications is new for me.
thanks in advance, I hope your help pmaldini85@hotmail.com

Please vinomarky i have this data from laboratory:

Pc