All Blog Entries

ÔÑßÉ ÎÏãÇÊ äÞá ÚÝÔ ÈÇáÑíÇÖ áßá ÇáÈÇÍËíä ãä ÇáÓÇÏÉ ÇáÚãáÇÁ Úä ÃíÏí ÇáÚæä ÎáÇá ÝÊÑÇÊ ÇáÇäÊÞÇá Åáì ãßÇä ÌÏíÏ ÓæÇÁ ßÇä ÇáÃãÑ ÈÇáäÓÈÉ áÃËÇË ÇáãäÇÒá Ãæ áÃËÇË

ÇáãÕÏÑ: https://sauditourguide.com/%d8%b4%d8...a%d8%a7%d8%b6/

ÔÑßÉ äÞá ÇËÇË ÝáÈíäííä ÇáÑíÇÖ ãä ÇáÃãæÑ ÇáÔÇÞÉ ÌÏÇ åí Úãáíå äÞá ÇáÃËÇË ÝíÎÔæÇ ãä Úãáíå ÇáäÞá Ãä ÊÍÏË Ãí ÇÖÑÇÑ æÊáÝ ÈÇáÃËÇË ÝáÐáß íÈÍËæä Úä ãä åã ãÎÊÕæä

ÇáãÕÏÑ: https://sauditourguide.com/%d8%b4%d8...a%d8%a7%d8%b6/

ÔÑßÉ äÞá ÇÛÑÇÖ ÈÇáÑíÇÖ ÍíË Ãä ÚãáíÉ äÞá ÇáÚÝÔ ãä ãßÇä Åáì ÃÎÑ ÓæÇÁ ÇáãÛÊÑÈíä ÈÇáããáßÉ ÇáÚÑÈíÉ ÇáÓÚæÏíÉ Ãæ ÇáÓÚæÏííä ÇáãÞíãíä ÏÇÎá ÇáÑíÇÖ¡ æÊÚãá ÇáßËíÑ

ÇáãÕÏÑ: https://sauditourguide.com/%d8%b4%d8...a%d8%a7%d8%b6/

Ïáíá ÔÑßÇÊ äÞá ÇáÚÝÔ ÈÇáÑíÇÖ ÝÇáÇäÊÞÇá ááÚíÔ Ýí ãßÇä ÂÎÑ íÊæÌÈ Úáíßã äÞá ÇáÃËÇË ÇáÎÇÕ Èßã ãä ÎáÇá ÇááÌæÁ Åáì æÇÍÏÉ ãä ÇáÔÑßÇÊ ÇáãÎÊÕÉ Ýí äÞá ÇáÚÝÔ ÈÇáãäØÞÉ

ÇáãÕÏÑ: https://sauditourguide.com/%d8%af%d9...a%d8%a7%d8%b6/

ÃÓÚÇÑ ÔÑßÇÊ äÞá ÇáÚÝÔ ÈÇáÑíÇÖ ÃÕÈÍÊ ãåãÉ ÇáÇäÊÞÇá ãä ãßÇä Åáì ÃÎÑ Ýí íæãäÇ åÐÇ ãä ÃÓåá ãÇ íßæä ÈÓÈÈ ÊæÝÑ ÔÑßÇÊ ÇáäÞá Ýí ßá ãßÇä æãä ÃÝÖá æÃÔåÑ ÔÑßÇÊ ÇáäÞá

ÇáãÕÏÑ: https://sauditourguide.com/%d8%a3%d8...a%d8%a7%d8%b6/

ÔÑßÉ äÞá ÇÛÑÇÖ ÈÇáÑíÇÖ ÍíË Ãä ÚãáíÉ äÞá ÇáÚÝÔ ãä ãßÇä Åáì ÃÎÑ ÓæÇÁ ÇáãÛÊÑÈíä ÈÇáããáßÉ ÇáÚÑÈíÉ ÇáÓÚæÏíÉ Ãæ ÇáÓÚæÏííä ÇáãÞíãíä ÏÇÎá ÇáÑíÇÖ¡ æÊÚãá ÇáßËíÑ

ÇáãÕÏÑ: https://sauditourguide.com/%d8%b4%d8...a%d8%a7%d8%b6/ ...

Dear friends:
Please I'm looking for ASTM F 2786-10 "Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)", could you share this information if you have it.
Best regards.

Someboby could post the files for IGE/TD/12 again? I'm looking now for these std. Thanks!
ceferino

Originally Posted by Thaksen79

Dear Members,

I would like to know what are the acceptable ways to perform reinforcement calculation on a flat plate for an ASME Sec VIII Div-1 stamp Air Cooled Heat Exchanger. The nozzles sizes are 4" and 8". The flat plate thickness shall be min 10mm.

Consider the case of Designing an Air Cooled Heat Exchanger. The design parameters are as follows,
Shell side
Design Press Int/ext=1.03/FV barg
Design Temp Int/ext=150/150 deg Celsius
MDMT= -5
Corrosion Allow = 0mm

Tube side
Design Press Int/ext=0.6/FV barg
Design Temp Int/ext=90/150 deg Celsius
MDMT= -5
Corrosion Allow = 0mm

The Nozzle sizes approx 4" Outlet and 8" Inlet which are welded to flat plates.

For more details of the exchanger construction please visit the below link
https://www.dropbox.com/s/jxat77b0a5...anger.pdf?dl=0

Tags: ... thanks for posting

Categories

Uncategorized

Hello,
Can anyone send OLGA 7.3 training manual to me pls?

Thanks.

Kazeem.

Originally Posted by brom

can anybody share shell expro internal training manuals for mechanical electrical or instrument ?

I am also interested..thanks for sharing

ÇáßÔÝ Úä ÊÓÑÈ ÇáãÇÁ ÇáßÔÝ Úä ÊÓÑÈ ÇáãÇÁ
ÇÑÞÇã ßÔÝ ÊÓÑÈÇÊ ÇáãíÇå ÇÑÞÇã ßÔÝ ÊÓÑÈÇÊ ÇáãíÇå
ÇÑÞÇã ßÔÝ ÊÓÑÈÇÊ ÇáãíÇå ÇÑÞÇã ßÔÝ ÊÓÑÈÇÊ ÇáãíÇå
ÇÑÞÇã ßÔÝ ÊÓÑÈ ÇáãíÇå ÇÑÞÇã ßÔÝ ÊÓÑÈ ÇáãíÇå
ÌåÇÒ ÝÍÕ ÊÓÑÈ ÇáãíÇå ÌåÇÒ ÝÍÕ ÊÓÑÈ ÇáãíÇå
ÊÓÑÈ ÇáãÇÁ ÏÇÎá ÇáÌÏÇÑ ÊÓÑÈ ÇáãÇÁ ÏÇÎá ÇáÌÏÇÑ
ÚáÇÌ ÊÓÑÈ ÇáãÇÁ ãä ÇáÍãÇã ÚáÇÌ ÊÓÑÈ ÇáãÇÁ ãä ÇáÍãÇã
ÇÓÈÇÈ ÊÓÑÈ ãíÇå ÇáÍãÇã ÇÓÈÇÈ ÊÓÑÈ ãíÇå ÇáÍãÇã
ÊÓÑÈ ÇáãíÇå ãä ÇáÓÞÝ ÊÓÑÈ ÇáãíÇå ãä ÇáÓÞÝ
ÊÓÑÈ ÇáãíÇå ãä ÓÞÝ ÇáÍãÇã ÊÓÑÈ ÇáãíÇå ãä ÓÞÝ ÇáÍãÇã
ãÇÏÉ ÊãäÚ ÊÓÑÈ ÇáãÇÁ ãÇÏÉ ÊãäÚ ÊÓÑÈ ÇáãÇÁ

Updated 04-30-2019 at 09:39 PM by remas2010

Tags: ßåÑÈÇÆí Ýí ÇáÑíÇÖ

Categories

Uncategorized

Originally Posted by endorphin

Good morning,

I am looking for drawings of Metallic double-deck internal floating roofs. I can't find any information except for what is mentioned in the API 650 annex H.
We need to setup drawings for an existing steel tank with diameter of 82m1 and 23m1 high.

If any one has example drawings please share.
Thanks

I am also interested in this topic too..thanks to share

Does anybody has LEEA course materials and Handbooks?

Please send me at jamozumder@gmail.com

Thanks in advance

Originally Posted by engr.Waseem

do you have any reference book/standard which show material caompatibility of 90% to 98 % Sulfuric acid? kingly upload reference files or send links

Regards