IEC Collection 042/150: IEC TC 90-Superconductivity

[BornToSin]

complete

IEC 61788-1:2006 Superconductivity - Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors
IEC 61788-2:2006 Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors
IEC 61788-3:2006 Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors
IEC 61788-4:2016 Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb₃Sn composite superconductors
IEC 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
IEC 61788-6:2011 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
IEC 61788-7:2006 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
IEC 61788-8:2010 Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
IEC 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
IEC 61788-10:2006 Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method
IEC 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb₃Sn composite superconducting wires
IEC 61788-13:2012 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
IEC 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
IEC 61788-15:2011 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies
IEC 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies
IEC 61788-17:2013 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films
IEC 61788-18:2013 Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
IEC 61788-19:2013 Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors
IEC TR 61788-20:2014 Superconductivity - Part 20: Superconducting wires - Categories of practical superconducting wires - General characteristics and guidance
IEC 61788-21:2015 Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General characteristics and guidance

[link Point to another website Only the registered members can access]

[BornToSin]

full list 22.11.2017:

IEC 61788-1:2006 Superconductivity - Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors
IEC 61788-2:2006 Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors
IEC 61788-3:2006 Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors
IEC 61788-4:2016 Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb₃Sn composite superconductors
IEC 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
IEC 61788-6:2011 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
IEC 61788-7:2006 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
IEC 61788-8:2010 Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
IEC 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
IEC 61788-10:2006 Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method
IEC 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb₃Sn composite superconducting wires
IEC 61788-13:2012 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
IEC 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
IEC 61788-15:2011 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies
IEC 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies
IEC 61788-17:2013 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films
IEC 61788-18:2013 Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
IEC 61788-19:2013 Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors
IEC TR 61788-20:2014 Superconductivity - Part 20: Superconducting wires - Categories of practical superconducting wires - General characteristics and guidance
IEC 61788-21:2015 Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General characteristics and guidance
IEC 61788-22-1:2017 Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors


complete

[link Point to another website Only the registered members can access]