ISO/TC 10
ISO 9175-1:1988 Tubular tips for hand-held technical pens using India ink on tracing paper -- Part 1: Definitions* dimensions* designation and marking
ISO 9177-1:2016 Mechanical pencils for technical drawings -- Part 1: Classification* dimensions* performance requirements and testing
ISO 9177-2:1989 Mechanical pencils -- Part 2: Black leads -- Classification and dimensions
ISO 9177-3:1994 Mechanical pencils -- Part 3: Black leads -- Bending strengths of HB leads
ISO 9180:1988 Black leads for wood-cased pencils -- Classification and diameters
ISO 9957-1:1992 Fluid draughting media -- Part 1: Water-based India ink -- Requirements and test conditions
ISO 9957-2:1995 Fluid draughting media -- Part 2: Water-based non-India ink -- Requirements and test conditions
ISO 9957-3:1997 Fluid draughting media -- Part 3: Water-based coloured draughting inks -- Requirements and test conditions
ISO 9958-1:1992 Draughting media for technical drawings -- Draughting film with polyester base -- Part 1: Requirements and marking
ISO 9958-2:1992 Draughting media for technical drawings -- Draughting film with polyester base -- Part 2: Determination of properties
ISO 9959-1:1992 Numerically controlled draughting machines -- Drawing test for the evaluation of performance -- Part 1: Vector plotters
ISO 9960-1:1992 Draughting instruments with or without graduation -- Part 1: Draughting scale rules
ISO 9961:1992 Draughting media for technical drawings -- Natural tracing paper
ISO 9962-1:1992 Manually operated draughting machines -- Part 1: Definitions* classification and designation
ISO 9962-2:1992 Manually operated draughting machines -- Part 2: Characteristics* performance* inspection and marking
ISO 10209:2012 Technical product documentation -- Vocabulary -- Terms relating to technical drawings* product definition and related documentation
ISO 11540:2014 Writing and marking instruments -- Specification for caps to reduce the risk of asphyxiation
ISO 12756:2016 Drawing and writing instruments -- Ball point pens and roller ball pens -- Vocabulary
ISO 12757-1:2016 Ball point pens and refills -- Part 1: General use
ISO 12757-2:1998 Ball point pens and refills -- Part 2: Documentary use (DOC)
ISO 14145-1:2016 Roller ball pens and refills -- Part 1: General use
ISO 14145-2:1998 Roller ball pens and refills -- Part 2: Documentary use (DOC)
ISO 16792:2015 Technical product documentation -- Digital product definition data practices
ISO 27668-1:2016 Gel ink ball pens and refills -- Part 1: General use
ISO 27668-2:2009 Gel ink ball pens and refills -- Part 2: Documentary use (DOC)
IEC 81346-1:2009 Industrial systems* installations and equipment and industrial products -- Structuring principles and reference designations -- Part 1: Basic rules
IEC 81346-2:2009 Industrial systems* installations and equipment and industrial products -- Structuring principles and reference designations -- Part 2: Classification of objects and codes for classes
IEC 82045-1:2001 Document management -- Part 1: Principles and methods
IEC 82045-2:2004 Document management -- Part 2: Metadata elements and information reference model
IEC 82045-2:2004/Cor 1:2014 Document management -- Part 2: Metadata elements and information reference model
IEC 82079-1:2012 Preparation of instructions for use -- Structuring* content and presentation -- Part 1: General principles and detailed requirements
Basic conventions
ISO 128-1:2003 Technical drawings -- General principles of presentation -- Part 1: Introduction and index
ISO 128-20:1996 Technical drawings -- General principles of presentation -- Part 20: Basic conventions for lines
ISO 128-21:1997 Technical drawings -- General principles of presentation -- Part 21: Preparation of lines by CAD systems
ISO 128-22:1999 Technical drawings -- General principles of presentation -- Part 22: Basic conventions and applications for leader lines and reference lines
ISO 128-30:2001 Technical drawings -- General principles of presentation -- Part 30: Basic conventions for views
ISO 128-40:2001 Technical drawings -- General principles of presentation -- Part 40: Basic conventions for cuts and sections
ISO 128-50:2001 Technical drawings -- General principles of presentation -- Part 50: Basic conventions for representing areas on cuts and sections
ISO 129-1:2004 Technical drawings -- Indication of dimensions and tolerances -- Part 1: General principles
ISO 3098-1:2015 Technical product documentation -- Lettering -- Part 1: General requirements
ISO 3098-2:2000 Technical product documentation -- Lettering -- Part 2: Latin alphabet* numerals and marks
ISO 3098-3:2000 Technical product documentation -- Lettering -- Part 3: Greek alphabet
ISO 3098-4:2000 Technical product documentation -- Lettering -- Part 4: Diacritical and particular marks for the Latin alphabet
ISO 3098-5:1997 Technical product documentation -- Lettering -- Part 5: CAD lettering of the Latin alphabet* numerals and marks
ISO 3098-6:2000 Technical product documentation -- Lettering -- Part 6: Cyrillic alphabet
ISO 5261:1995 Technical drawings -- Simplified representation of bars and profile sections
ISO 5455:1979 Technical drawings -- Scales
ISO 5456-1:1996 Technical drawings -- Projection methods -- Part 1: Synopsis
ISO 5456-2:1996 Technical drawings -- Projection methods -- Part 2: Orthographic representations
ISO 5456-3:1996 Technical drawings -- Projection methods -- Part 3: Axonometric representations
ISO 5456-4:1996 Technical drawings -- Projection methods -- Part 4: Central projection
ISO 5457:1999 Technical product documentation -- Sizes and layout of drawing sheets
ISO 5457:1999/Amd 1:2010 Technical product documentation -- Sizes and layout of drawing sheets
ISO 6428:1982 Technical drawings -- Requirements for microcopying
ISO 6433:2012 Technical product documentation -- Part references
ISO 7083:1983 Technical drawings -- Symbols for geometrical tolerancing -- Proportions and dimensions
ISO 7200:2004 Technical product documentation -- Data fields in title blocks and document headers
ISO 7573:2008 Technical product documentation -- Parts lists
ISO 11005:2010 Technical product documentation -- Use of main documents
ISO 11442:2006 Technical product documentation -- Document management
ISO 15226:1999 Technical product documentation -- Life cycle model and allocation of documents
ISO 16016:2016 Technical product documentation -- Protection notices for restricting the use of documents and products
ISO 29845:2011 Technical product documentation -- Document types
Mechanical engineering documentation
ISO 128-15:2013 Technical product documentation (TPD) -- General principles of presentation -- Part 15: Presentation of shipbuilding drawings
ISO 128-24:2014 Technical drawings -- General principles of presentation -- Part 24: Lines on mechanical engineering drawings
ISO 128-25:1999 Technical drawings -- General principles of presentation -- Part 25: Lines on shipbuilding drawings
ISO 128-34:2001 Technical drawings -- General principles of presentation -- Part 34: Views on mechanical engineering drawings
ISO 128-44:2001 Technical drawings -- General principles of presentation -- Part 44: Sections on mechanical engineering drawings
ISO/TS 128-71:2010 Technical product documentation (TPD) -- General principles of presentation -- Part 71: Simplified representation for mechanical engineering drawings
ISO 129-4:2013 Technical product documentation (TPD) -- Indication of dimensions and tolerances -- Part 4: Dimensioning of shipbuilding drawings
ISO 2162-1:1993 Technical product documentation -- Springs -- Part 1: Simplified representation
ISO 2203:1973 Technical drawings -- Conventional representation of gears
ISO 3952-1:1981 Kinematic diagrams -- Graphical symbols
ISO 3952-1:1981/Amd 1:2002 Kinematic diagrams -- Graphical symbols
ISO 3952-2:1981 Kinematic diagrams -- Graphical symbols
ISO 3952-3:1979 Kinematic diagrams -- Graphical symbols
ISO 3952-4:1984 Kinematic diagrams -- Graphical symbols
ISO 5845-1:1995 Technical drawings -- Simplified representation of the assembly of parts with fasteners -- Part 1: General principles
ISO 5845-2:1995 Technical drawings -- Simplified representation of the assembly of parts with fasteners -- Part 2: Rivets for aerospace equipment
ISO 6410-1:1993 Technical drawings -- Screw threads and threaded parts -- Part 1: General conventions
ISO 6410-2:1993 Technical drawings -- Screw threads and threaded parts -- Part 2: Screw thread inserts
ISO 6410-3:1993 Technical drawings -- Screw threads and threaded parts -- Part 3: Simplified representation
ISO 6411:1982 Technical drawings -- Simplified representation of centre holes
ISO 6413:1988 Technical drawings -- Representation of splines and serrations
ISO 6414:1982 Technical drawings for glassware
ISO 8826-1:1989 Technical drawings -- Rolling bearings -- Part 1: General simplified representation
ISO 8826-2:1994 Technical drawings -- Rolling bearings -- Part 2: Detailed simplified representation
ISO 9222-1:1989 Technical drawings -- Seals for dynamic application -- Part 1: General simplified representation
ISO 9222-2:1989 Technical drawings -- Seals for dynamic application -- Part 2: Detailed simplified representation
ISO 13444:2012 Technical product documentation (TPD) -- Dimensioning and indication of knurling
ISO 13715:2017 Technical product documentation -- Edges of undefined shape -- Indication and dimensioning
ISO 15785:2002 Technical drawings -- Symbolic presentation and indication of adhesive* fold and pressed joints
ISO 15786:2008 Technical drawings -- Simplified representation and dimensioning of holes
ISO 15787:2016 Technical product documentation -- Heat-treated ferrous parts -- Presentation and indications
ISO 17599:2015 Technical product documentation (TPD) -- General requirements of digital mock-up for mechanical products
ISO 18388:2016 Technical product documentation (TPD) -- Relief grooves -- Types and dimensioning
Construction documentation
ISO 128-23:1999 Technical drawings -- General principles of presentation -- Part 23: Lines on construction drawings
ISO 128-43:2015 Technical product documentation (TPD) -- General principles of presentation -- Part 43: Projection methods in building drawings
ISO 3766:2003 Construction drawings -- Simplified representation of concrete reinforcement
ISO 4157-1:1998 Construction drawings -- Designation systems -- Part 1: Buildings and parts of buildings
ISO 4157-2:1998 Construction drawings -- Designation systems -- Part 2: Room names and numbers
ISO 4157-3:1998 Construction drawings -- Designation systems -- Part 3: Room identifiers
ISO 4172:1991 Technical drawings -- Construction drawings -- Drawings for the assembly of prefabricated structures
ISO 6284:1996 Construction drawings -- Indication of limit deviations
ISO 7437:1990 Technical drawings -- Construction drawings -- General rules for execution of production drawings for prefabricated structural components
ISO 7518:1983 Technical drawings -- Construction drawings -- Simplified representation of demolition and rebuilding
ISO 7519:1991 Technical drawings -- Construction drawings -- General principles of presentation for general arrangement and assembly drawings
ISO 8048:1984 Technical drawings -- Construction drawings -- Representation of views* sections and cuts
ISO 8560:1986 Technical drawings -- Construction drawings -- Representation of modular sizes* lines and grids
ISO 9431:1990 Construction drawings -- Spaces for drawing and for text* and title blocks on drawing sheets
ISO 11091:1994 Construction drawings -- Landscape drawing practice
ISO 13567-1:1998 Technical product documentation -- Organization and naming of layers for CAD -- Part 1: Overview and principles
ISO 13567-2:1998 Technical product documentation -- Organization and naming of layers for CAD -- Part 2: Concepts* format and codes used in construction documentation
ISO/TR 16310:2014 Symbol libraries for construction and facilities management
Process plant documentation
ISO 3511-1:1977 Process measurement control functions and instrumentation -- Symbolic representation -- Part 1: Basic requirements
ISO 3511-2:1984 Process measurement control functions and instrumentation -- Symbolic representation -- Part 2: Extension of basic requirements
ISO 3511-3:1984 Process measurement control functions and instrumentation -- Symbolic representation -- Part 3: Detailed symbols for instrument interconnection diagrams
ISO 3511-4:1985 Industrial process measurement control functions and instrumentation -- Symbolic representation -- Part 4: Basic symbols for process computer* interface* and shared display/control functions
ISO 6412-1:1989 Technical drawings -- Simplified representation of pipelines -- Part 1: General rules and orthogonal representation
ISO 6412-2:1989 Technical drawings -- Simplified representation of pipelines -- Part 2: Isometric projection
ISO 6412-3:1993 Technical drawings -- Simplified representation of pipelines -- Part 3: Terminal features of ventilation and drainage systems
ISO 10628-1:2014 Diagrams for the chemical and petrochemical industry -- Part 1: Specification of diagrams
ISO 10628-2:2012 Diagrams for the chemical and petrochemical industry -- Part 2: Graphical symbols
ISO 14084-1:2015 Process diagrams for power plants -- Part 1: Specification for diagrams
ISO 14084-2:2015 Process diagrams for power plants -- Part 2: Graphical symbols
ISO 14617-1:2005 Graphical symbols for diagrams -- Part 1: General information and indexes
ISO 14617-2:2002 Graphical symbols for diagrams -- Part 2: Symbols having general application
ISO 14617-3:2002 Graphical symbols for diagrams -- Part 3: Connections and related devices
ISO 14617-4:2002 Graphical symbols for diagrams -- Part 4: Actuators and related devices
ISO 14617-5:2002 Graphical symbols for diagrams -- Part 5: Measurement and control devices
ISO 14617-6:2002 Graphical symbols for diagrams -- Part 6: Measurement and control functions
ISO 14617-7:2002 Graphical symbols for diagrams -- Part 7: Basic mechanical components
ISO 14617-8:2002 Graphical symbols for diagrams -- Part 8: Valves and dampers
ISO 14617-9:2002 Graphical symbols for diagrams -- Part 9: Pumps* compressors and fans
ISO 14617-10:2002 Graphical symbols for diagrams -- Part 10: Fluid power converters
ISO 14617-11:2002 Graphical symbols for diagrams -- Part 11: Devices for heat transfer and heat engines
ISO 14617-12:2002 Graphical symbols for diagrams -- Part 12: Devices for separating* purification and mixing
ISO 14617-13:2004 Graphical symbols for diagrams -- Part 13: Devices for material processing
ISO 14617-14:2004 Graphical symbols for diagrams -- Part 14: Devices for transport and handling of material
ISO 14617-15:2002 Graphical symbols for diagrams -- Part 15: Installation diagrams and network maps
ISO 15519-1:2010 Specification for diagrams for process industry -- Part 1: General rules
ISO 15519-2:2015 Specifications for diagrams for process industry -- Part 2: Measurement and control
ISO 81714-1:2010 Design of graphical symbols for use in the technical documentation of products -- Part 1: Basic rules
IEC 81714-2:2006 Design of graphical symbols for use in the technical documentation of products -- Part 2: Specification for graphical symbols in a computer sensible form* including graphical symbols for a reference library* and requirements for their interchange
IEC 81714-3:2004 Design of graphical symbols for use in the technical documentation of products -- Part 3: Classification of connect nodes* networks and their encoding
ISO/TS 81346-3:2012 Industrial systems* installations and equipment and industrial products -- Structuring principles and reference designations -- Part 3: Application rules for a reference designation system
ISO/TS 81346-10:2015 Industrial systems* installations and equipment and industrial products -- Structuring principles and reference designation -- Part 10: Power plants
the missing are:
ISO 27668-1:2016 Gel ink ball pens and refills -- Part 1: General use
ISO 13715:2017 Technical product documentation -- Edges of undefined shape -- Indication and dimensioning
[link Point to another website Only the registered members can access]
Reply With Quote
Bookmarks