full list:
Standard and/or project under the direct responsibility of ISO/TC 29 Secretariat
ISO 234-1:1983 Files and rasps -- Part 1: Dimensions
ISO 234-2:1982 Files and rasps -- Part 2: Characteristics of cut
ISO 1180:1983 Shanks for pneumatic tools and fitting dimensions of chuck bushings
ISO 1180:1983/Add 1:1985 Shanks for pneumatic tools and fitting dimensions of chuck bushings
ISO 1651:1974 Tube drawing mandrels
ISO 1651:1974/Amd 1:1982 Tube drawing mandrels
ISO 1684:1975 Wire* bar and tube drawing dies -- Specifications
ISO 1684:1975/Amd 2:1982 Wire* bar and tube drawing dies -- Specifications
ISO 2336-1:1996 ****saw blades -- Part 1: Dimensions for hand blades
ISO 2729:1995 Woodworking tools -- Chisels and gouges
ISO 2804:1996 Wire* bar or tube drawing dies -- As-sintered pellets of hardmetal (carbide) -- Dimensions
ISO 3002-1:1982 Basic quantities in cutting and grinding -- Part 1: Geometry of the active part of cutting tools -- General terms* reference systems* tool and working angles* chip breakers
ISO 3002-1:1982/Amd 1:1992 Basic quantities in cutting and grinding -- Part 1: Geometry of the active part of cutting tools -- General terms* reference systems* tool and working angles* chip breakers
ISO 3002-2:1982 Basic quantities in cutting and grinding -- Part 2: Geometry of the active part of cutting tools -- General conversion formulae to relate tool and working angles
ISO 3002-3:1984 Basic quantities in cutting and grinding -- Part 3: Geometric and kinematic quantities in cutting
ISO 3002-4:1984 Basic quantities in cutting and grinding -- Part 4: Forces* energy* power
ISO 3002-5:1989 Basic quantities in cutting and grinding -- Part 5: Basic terminology for grinding processes using grinding wheels
ISO 13399-1:2006 Cutting tool data representation and exchange -- Part 1: Overview* fundamental principles and general information model
ISO 13399-1:2006/Amd 1:2010 Cutting tool data representation and exchange -- Part 1: Overview* fundamental principles and general information model
ISO 13399-1:2006/Cor 1:2008 Cutting tool data representation and exchange -- Part 1: Overview* fundamental principles and general information model
ISO 13399-1:2006/Cor 2:2011 Cutting tool data representation and exchange -- Part 1: Overview* fundamental principles and general information model
ISO/TS 13399-2:2014 Cutting tool data representation and exchange -- Part 2: Reference dictionary for the cutting items
ISO/TS 13399-2:2005/Cor 1:2011 Cutting tool data representation and exchange -- Part 2: Reference dictionary for the cutting items
ISO/TS 13399-3:2014 Cutting tool data representation and exchange -- Part 3: Reference dictionary for tool items
ISO/TS 13399-3:2007/Cor 1:2011 Cutting tool data representation and exchange -- Part 3: Reference dictionary for tool items
ISO/TS 13399-4:2014 Cutting tool data representation and exchange -- Part 4: Reference dictionary for adaptive items
ISO/TS 13399-4:2007/Cor 1:2011 Cutting tool data representation and exchange -- Part 4: Reference dictionary for adaptive items
ISO/TS 13399-5:2014 Cutting tool data representation and exchange -- Part 5: Reference dictionary for assembly items
ISO/TS 13399-5:2007/Cor 1:2011 Cutting tool data representation and exchange -- Part 5: Reference dictionary for assembly items
ISO/TS 13399-50:2013 Cutting tool data representation and exchange -- Part 50: Reference dictionary for reference systems and common concepts
ISO/TS 13399-50:2007/Cor 1:2011 Cutting tool data representation and exchange -- Part 50: Reference dictionary for reference systems and common concepts
ISO/TS 13399-60:2014 Cutting tool data representation and exchange -- Part 60: Reference dictionary for connection systems
ISO/TS 13399-70:2016 Cutting tool data representation and exchange -- Part 70: Graphical data layout -- Layer setting for tool layout
ISO/TS 13399-71:2016 Cutting tool data representation and exchange -- Part 71: Graphical data layout -- Creation of documents for standardized data exchange: Graphical product information
ISO/TS 13399-72:2016 Cutting tool data representation and exchange -- Part 72: Creation of documents for the standardized data exchange -- Definition of properties for drawing header and their XML-data exchange
ISO/TS 13399-80:2014 Cutting tool data representation and exchange -- Part 80: Creation and exchange of 3D models -- Overview and principles
ISO/TS 13399-100:2008 Cutting tool data representation and exchange -- Part 100: Definitions* principles and methods for reference dictionaries
ISO/TS 13399-100:2008/Cor 1:2011 Cutting tool data representation and exchange -- Part 100: Definitions* principles and methods for reference dictionaries
ISO/TS 13399-150:2008 Cutting tool data representation and exchange -- Part 150: Usage guidelines
ISO/TS 13399-201:2014 Cutting tool data representation and exchange -- Part 201: Creation and exchange of 3D models -- Regular inserts
ISO/TS 13399-202:2015 Cutting tool data representation and exchange -- Part 202: Creation and exchange of 3D models -- Irregular inserts
ISO/TS 13399-203:2015 Cutting tool data representation and exchange -- Part 203: Creation and exchange of 3D models -- Replaceable inserts for drilling
ISO/TS 13399-204:2016 Cutting tool data representation and exchange -- Part 204: Creation and exchange of 3D models -- Inserts for reaming
ISO/TS 13399-301:2013 Cutting tool data representation and exchange -- Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps* thread-forming taps and thread-cutting dies
ISO/TS 13399-302:2013 Cutting tool data representation and exchange -- Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools
ISO/TS 13399-303:2016 Cutting tool data representation and exchange -- Part 303: Creation and exchange of 3D models -- Solid end mills
ISO/TS 13399-304:2016 Cutting tool data representation and exchange -- Part 304: Creation and exchange of 3D models -- Solid milling cutters with arbor hole
ISO/TS 13399-305:2017 Cutting tool data representation and exchange -- Part 305: Creation and exchange of 3D models -- Modular tooling systems with adjustable cartridges for boring
ISO/TS 13399-307:2016 Cutting tool data representation and exchange -- Part 307: Creation and exchange of 3D models -- End mills for indexable inserts
ISO/TS 13399-308:2016 Cutting tool data representation and exchange -- Part 308: Creation and exchange of 3D models -- Milling cutters with arbor hole for indexable inserts
ISO/TS 13399-309:2016 Cutting tool data representation and exchange -- Part 309: Creation and exchange of 3D models -- Tool holders for indexable inserts
ISO/TS 13399-310:2017 Cutting tool data representation and exchange -- Part 310: Creation and exchange of 3D models -- Turning tools with carbide tips
ISO/TS 13399-311:2016 Cutting tool data representation and exchange -- Part 311: Creation and exchange of 3D models -- Solid reamers
ISO/TS 13399-312:2016 Cutting tool data representation and exchange -- Part 312: Creation and exchange of 3D models -- Reamers for indexable inserts
ISO/TS 13399-401:2016 Cutting tool data representation and exchange -- Part 401: Creation and exchange of 3D models -- Converting* extending and reducing adaptive items
ISO/TS 13399-405:2016 Cutting tool data representation and exchange -- Part 405: Creation and exchange of 3D models -- Collets
Holding tools* adaptive items and interfaces
ISO 236-1:1976 Hand reamers
ISO 237:1975 Rotating tools with parallel shanks -- Diameters of shanks and sizes of driving squares
ISO 238:2016 Reduction sleeves and extension sockets for tools with Morse taper shanks
ISO 239:1999 Drill chuck tapers
ISO 241:1994 Shanks for turning and planing tools -- Shapes and dimensions of the section
ISO 296:1991 Machine tools -- Self-holding tapers for tool shanks
ISO 297:1988 7/24 tapers for tool shanks for manual changing
ISO 839-1:2006 Milling machine arbors with 7/24 tapers -- Part 1: Dimensions and designation
ISO 839-2:1977 Milling machine arbors with 7/24 tapers -- Part 2: Accessories
ISO 1080:1975 Machine tools -- Morse taper shanks -- Cotter slots with taper keys
ISO 2584:2016 Cylindrical cutters with plain bore and key drive -- Metric series
ISO 2857:1973/Cor 1:1990 Cylindrical cutters with plain bore and key drive -- Metric series
ISO 2857:1973/Amd 1:1984 Cylindrical cutters with plain bore and key drive -- Metric series
ISO 2857:1973/Amd 2:1986 Cylindrical cutters with plain bore and key drive -- Metric series
ISO 2940-1:1974 Milling cutters mounted on centring arbors having a 7/24 taper -- Fitting dimensions -- Centring arbors
ISO 2940-2:1974 Milling cutters mounted on centring arbors having a 7/24 taper -- Inserted tooth cutters
ISO 3292:2016 Extra-long parallel shank twist drills
ISO 3338-1:1996 Cylindrical shanks for milling cutters -- Part 1: Dimensional characteristics of plain cylindrical shanks
ISO 3338-2:2013 Cylindrical shanks for milling cutters -- Part 2: Dimensional characteristics of flatted cylindrical shanks
ISO 3338-3:1996 Cylindrical shanks for milling cutters -- Part 3: Dimensional characteristics of threaded shanks
ISO 3855:1977/Cor 1:1996 Cylindrical shanks for milling cutters -- Part 3: Dimensional characteristics of threaded shanks
ISO 3936:1993 Reduction sleeves with tenon drive with external and internal 7/24 taper -- Dimensions
ISO 3937-1:2008 Cutter arbors with tenon drive -- Part 1: Dimensions of Morse taper
ISO 3937-2:2008 Cutter arbors with tenon drive -- Part 2: Dimensions of 7/24 taper
ISO 3937-3:2008 Cutter arbors with tenon drive -- Part 3: Dimensions of hollow taper interface with flange contact surface
ISO 4202:2016 Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
ISO 4203:1978 Parallel shank tools -- Driving tenons and sockets -- Dimensions
ISO 4204:2016 Countersinks* 90°* with Morse taper shanks and detachable pilots
ISO 4206:2016 Counterbores with parallel shanks and solid pilots
ISO 4248:1978 Jig bushes -- Definitions and nomenclature
ISO 5413:1993 Machine tools -- Positive drive of Morse tapers
ISO 5414-1:2002 Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools -- Part 1: Dimensions of the driving system of tool shanks
ISO 5414-2:2002 Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools -- Part 2: Connecting dimensions of chucks and designation
ISO 5415:2007 Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
ISO 5969:1979/Cor 1:1991 Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
ISO 7079:2016 Core drills with parallel shanks and with Morse taper shanks
ISO 7388-1:2007 Tool shanks with 7/24 taper for automatic tool changers -- Part 1: Dimensions and designation of shanks of forms A* AD* AF* U* UD and UF
ISO 7388-2:2007 Tool shanks with 7/24 taper for automatic tool changers -- Part 2: Dimensions and designation of shanks of forms J* JD and JF
ISO 7388-3:2016 Tool shanks with 7/24 taper for automatic tool changers -- Part 3: Retention knobs of forms AD* AF* UD* UF* JD and JF
ISO 9270-1:2010 7/24 taper spindle noses for automatic tool changers -- Part 1: Dimensions and designation of spindle noses of forms S and SF
ISO 9270-2:2010 7/24 taper spindle noses for automatic tool changers -- Part 2: Dimensions and designation of spindle noses of forms J and JF
ISO 9524:1993 Machine tools -- Front faces of spindle holders for machining centres -- Functional dimensions
ISO 10643:2009 Dimensions of accessories for cutter arbors with parallel key and tenon drive
ISO 10649-1:2013 Cutter arbors with parallel key and tenon drive -- Part 1: General dimensions
ISO 10649-2:2013 Cutter arbors with parallel key and tenon drive -- Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
ISO 10649-3:2013 Cutter arbors with parallel key and tenon drive -- Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
ISO 10649-4:2013 Cutter arbors with parallel key and tenon drive -- Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
ISO 10649-5:2012 Cutter arbors with parallel key and tenon drive -- Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
ISO 10649-6:2012 Cutter arbors with parallel key and tenon drive -- Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system
ISO 10887:1999 Key type three-jaw drill chucks -- Specification
ISO 10888:1999 Keyless type three-jaw drill chucks -- Specification
ISO 10889-1:2004 Tool holders with cylindrical shank -- Part 1: Cylindrical shank* location bore -- Technical delivery conditions
ISO 10889-2:2016 Tool holders with cylindrical shank -- Part 2: Type A* shanks for tool holders of special designs
ISO 10889-3:2016 Tool holders with cylindrical shank -- Part 3: Type B with rectangular radial seat
ISO 10889-4:2016 Tool holders with cylindrical shank -- Part 4: Type C with rectangular axial seat
ISO 10889-5:2016 Tool holders with cylindrical shank -- Part 5: Type D with more than one rectangular seat
ISO 10889-6:2016 Tool holders with cylindrical shank -- Part 6: Type E with cylindrical seat
ISO 10889-7:2016 Tool holders with cylindrical shank -- Part 7: Type F with taper seat
ISO 10889-8:1997 Tool holders with cylindrical shank -- Part 8: Type Z* accessories
ISO 10897:2016 Collets for tool holders with taper ratio 1:10 -- Collets* holders* nuts
ISO 12164-1:2001 Hollow taper interface with flange contact surface -- Part 1: Shanks -- Dimensions
ISO 12164-2:2001 Hollow taper interface with flange contact surface -- Part 2: Receivers -- Dimensions
ISO 12164-3:2014 Hollow taper interface with flange contact surface -- Part 3: Dimensions of shanks for stationary tools
ISO 12164-4:2014 Hollow taper interface with flange contact surface -- Part 4: Dimensions of receivers for stationary tools
ISO 15488:2003 Collets with 8 degree setting angle for tool shanks -- Collets* nuts and fitting dimensions
ISO 26622-1:2008 Modular taper interface with ball track system -- Part 1: Dimensions and designation of shanks
ISO 26622-2:2008 Modular taper interface with ball track system -- Part 2: Dimensions and designation of receivers
ISO 26623-1:2014 Polygonal taper interface with flange contact surface -- Part 1: Dimensions and designation of shanks
ISO 26623-2:2014 Polygonal taper interface with flange contact surface -- Part 2: Dimensions and designation of receivers
Grinding wheels and abrasives
ISO 525:2013 Bonded abrasive products -- General requirements
ISO 603-1:1999 Bonded abrasive products -- Dimensions -- Part 1: Grinding wheels for external cylindrical grinding between centres
ISO 603-1:1999/Cor 1:1999 Bonded abrasive products -- Dimensions -- Part 1: Grinding wheels for external cylindrical grinding between centres
ISO 603-2:1999 Bonded abrasive products -- Dimensions -- Part 2: Grinding wheels for centreless external cylindrical grinding
ISO 603-2:1999/Cor 1:1999 Bonded abrasive products -- Dimensions -- Part 2: Grinding wheels for centreless external cylindrical grinding
ISO 603-3:1999 Bonded abrasive products -- Dimensions -- Part 3: Grinding wheels for internal cylindrical grinding
ISO 603-3:1999/Cor 1:1999 Bonded abrasive products -- Dimensions -- Part 3: Grinding wheels for internal cylindrical grinding
ISO 603-4:1999 Bonded abrasive products -- Dimensions -- Part 4: Grinding wheels for surface grinding/peripheral grinding
ISO 603-4:1999/Cor 1:1999 Bonded abrasive products -- Dimensions -- Part 4: Grinding wheels for surface grinding/peripheral grinding
ISO 603-5:1999 Bonded abrasive products -- Dimensions -- Part 5: Grinding wheels for surface grinding/face grinding
ISO 603-5:1999/Cor 1:1999 Bonded abrasive products -- Dimensions -- Part 5: Grinding wheels for surface grinding/face grinding
ISO 603-6:1999 Bonded abrasive products -- Dimensions -- Part 6: Grinding wheels for tool and tool room grinding
ISO 603-6:1999/Cor 1:1999 Bonded abrasive products -- Dimensions -- Part 6: Grinding wheels for tool and tool room grinding
ISO 603-7:1999 Bonded abrasive products -- Dimensions -- Part 7: Grinding wheels for manually guided grinding
ISO 603-7:1999/Cor 1:1999 Bonded abrasive products -- Dimensions -- Part 7: Grinding wheels for manually guided grinding
ISO 603-8:1999 Bonded abrasive products -- Dimensions -- Part 8: Grinding wheels for deburring and fettling/snagging
ISO 603-8:1999/Cor 1:1999 Bonded abrasive products -- Dimensions -- Part 8: Grinding wheels for deburring and fettling/snagging
ISO 603-9:1999 Bonded abrasive products -- Dimensions -- Part 9: Grinding wheels for high-pressure grinding
ISO 603-9:1999/Cor 1:1999 Bonded abrasive products -- Dimensions -- Part 9: Grinding wheels for high-pressure grinding
ISO 603-10:1999 Bonded abrasive products -- Dimensions -- Part 10: Stones for honing and superfinishings
ISO 603-10:1999/Cor 1:1999 Bonded abrasive products -- Dimensions -- Part 10: Stones for honing and superfinishings
ISO 603-11:1999 Bonded abrasive products -- Dimensions -- Part 11: Hand finishing sticks
ISO 603-11:1999/Cor 1:1999 Bonded abrasive products -- Dimensions -- Part 11: Hand finishing sticks
ISO 603-12:1999 Bonded abrasive products -- Dimensions -- Part 12: Grinding wheels for deburring and fettling on a straight grinder
ISO 603-12:1999/Cor 1:1999 Bonded abrasive products -- Dimensions -- Part 12: Grinding wheels for deburring and fettling on a straight grinder
ISO 603-13:1999 Bonded abrasive products -- Dimensions -- Part 13: Grinding wheels for deburring and fettling on a vertical grinder
ISO 603-13:1999/Cor 1:1999 Bonded abrasive products -- Dimensions -- Part 13: Grinding wheels for deburring and fettling on a vertical grinder
ISO 603-14:1999 Bonded abrasive products -- Dimensions -- Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder
ISO 603-14:1999/Cor 1:1999 Bonded abrasive products -- Dimensions -- Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder
ISO 603-15:1999 Bonded abrasive products -- Dimensions -- Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines
ISO 603-15:1999/Cor 1:1999 Bonded abrasive products -- Dimensions -- Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines
ISO 603-16:1999 Bonded abrasive produtcs -- Dimensions -- Part 16: Grinding wheels for cutting-off on hand held power tools
ISO 603-16:1999/Cor 1:1999 Bonded abrasive produtcs -- Dimensions -- Part 16: Grinding wheels for cutting-off on hand held power tools
ISO 603-17:2014 Bonded abrasive products -- Dimensions -- Part 17: Spindle mounted wheels (ISO type 52)
ISO 603-18:2013 Bonded abrasive products -- Dimensions -- Part 18: Grinding wheels for flat glass edge grinding machines
ISO 2421:2003 Coated abrasives -- Cylindrical sleeves
ISO 2976:2005 Coated abrasives -- Abrasive belts -- Selection of width/length combinations
ISO 3366:1999 Coated abrasives -- Abrasive rolls
ISO 3919:2005 Coated abrasives -- Flap wheels with shaft
ISO 3919:2005/Amd 1:2014 Coated abrasives -- Flap wheels with shaft
ISO 5429:2012 Coated abrasives -- Flap wheels with incorporated flanges or separate flanges
ISO 6103:2014 Bonded abrasive products -- Permissible unbalances of grinding wheels as delivered -- Static testing
ISO 6104:2005 Superabrasive products -- Rotating grinding tools with diamond or cubic boron nitride -- General survey* designation and multilingual nomenclature
ISO 6106:2013 Abrasive products -- Checking the grain size of superabrasives
ISO 6344-1:1998 Coated abrasives -- Grain size analysis -- Part 1: Grain size distribution test
ISO 6344-2:1998 Coated abrasives -- Grain size analysis -- Part 2: Determination of grain size distribution of macrogrits P12 to P220
ISO 6344-3:2013 Coated abrasives -- Grain size analysis -- Part 3: Determination of grain size distribution of microgrits P240 to P2500
ISO 8486-1:1996 Bonded abrasives -- Determination and designation of grain size distribution -- Part 1: Macrogrits F4 to F220
ISO 8486-2:2007 Bonded abrasives -- Determination and designation of grain size distribution -- Part 2: Microgrits F230 to F2000
ISO 9136-1:2004 Abrasive grains -- Determination of bulk density -- Part 1: Macrogrits
ISO 9136-2:1999 Abrasive grains -- Determination of bulk density -- Part 2: Microgrits
ISO 9138:2015 Abrasive grains -- Sampling and splitting
ISO 9284:2013 Abrasive grains -- Test-sieving machines
ISO 9285:1997 Abrasive grains and crude -- Chemical analysis of fused aluminium oxide
ISO 9286:1997 Abrasive grains and crude -- Chemical analysis of silicon carbide
ISO 13942:2000 Bonded abrasive products -- Limit deviations and run-out tolerances
ISO 15635:2001 Coated abrasives -- Flap discs
ISO 15636:2003 Back-up pads for vulcanized fibre discs
ISO 15637-1:2002 Holding fixtures of cylindrical abrasive sleeves -- Part 1: Holding fixtures with shank for hand-held grinding machines
ISO 15637-2:2002 Holding fixtures of cylindrical abrasive sleeves -- Part 2: Holding fixtures for stationary machines
ISO 16057:2002 Coated abrasives -- Vulcanized fibre discs
ISO 21537-1:2004 Clamping flanges for superabrasive cutting-off wheels -- Part 1: Natural stone
ISO 21537-2:2004 Clamping flanges for superabrasive cutting-off wheels -- Part 2: Building and construction
ISO 21538:2016 Blanks for superabrasive cutting-off wheels -- Mounting and fixing bores -- Building construction and civil engineering
ISO 21948:2001 Coated abrasives -- Plain sheets
ISO 21949:2001 Coated abrasives -- Plain sheets with holes for dust extraction
ISO 21950:2001 Coated abrasives -- Plain discs
ISO 21951:2001 Coated abrasives -- Plain discs with holes for dust extraction
ISO 22917:2016 Precision superabrasives -- Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride
ISO/TR 24857:2006 Synthetic industrial diamond grit products -- Single-particle compressive failure strength -- "DiaTest-SI" system
Tools for pressing and moulding
ISO 6751:2011 Tools for moulding -- Ejector pins with cylindrical head
ISO 6752:2008 Tools for pressing -- Round punches with 60 degrees conical head and straight shank
ISO 6753-1:2005 Tools for pressing and moulding -- Machined plates -- Part 1: Machined plates for press tools
ISO 6753-2:1998 Tools for pressing and moulding -- Machined plates -- Part 2: Machined plates for moulds
ISO 8017:2007 Tools for moulding -- Guide pillars* straight and shouldered* and locating guide pillars* shouldered
ISO 8018:2007 Tools for moulding -- Guide bushes* headed* and locating guide bushes* headed
ISO 8020:2002 Tools for pressing -- Punches with cylindrical head and straight or reduced shank
ISO 8404:2013 Tools for moulding -- Angle pins
ISO 8405:2013 Tools for moulding -- Ejector sleeves with cylindrical head -- Basic series for general purposes
ISO 8406:2008 Tools for moulding -- Mould bases -- Round locating elements and spacers
ISO 8693:2011 Tools for moulding -- Flat ejector pins
ISO 8694:2011 Tools for moulding -- Shouldered ejector pins
ISO 8695:2010 Tools for pressing -- Punches -- Nomenclature and terminology
ISO 8977:2003 Tools for pressing -- Matrixes
ISO 9181:2007 Tools for pressing -- Round punches with 60 degrees conical head and reduced shank
ISO 9182-1:2013 Tools for pressing -- Guide pillars -- Part 1: Types
ISO 9182-2:2013 Tools for pressing -- Guide pillars -- Part 2: Type A* straight pillars
ISO 9182-3:2013 Tools for pressing -- Guide pillars -- Part 3: Type B* end-locking pillars
ISO 9182-4:2013 Tools for pressing -- Guide pillars -- Part 4: Type C* pillars with taper lead and bush
ISO 9182-5:2013 Tools for pressing -- Guide pillars -- Part 5: Type D* end-locking pillars with flange
ISO 9183-1:2008 Tools for pressing -- Wear plates for press dies -- Part 1: Type A
ISO 9183-2:2011 Tools for pressing -- Wear plates for press dies -- Part 2: Type B
ISO 9448-1:2013 Tools for pressing -- Guide bushes -- Part 1: Forms
ISO 9448-2:2013 Tools for pressing -- Guide bushes -- Part 2: Form A* gliding bushes* plain* type 1
ISO 9448-3:2013 Tools for pressing -- Guide bushes -- Part 3: Form B* ball cage bushes* plain* type 1
ISO 9448-4:2013 Tools for pressing -- Guide bushes -- Part 4: Form C* gliding bushes* headed* type 1
ISO 9448-5:2013 Tools for pressing -- Guide bushes -- Part 5: Form D* ball cage bushes* headed* type 1
ISO 9448-6:2013 Tools for pressing -- Guide bushes -- Part 6: Form E* gliding bushes* flanged* type 1
ISO 9448-7:2013 Tools for pressing -- Guide bushes -- Part 7: Form F* ball cage bushes* flanged* type 1
ISO 9448-8:2013 Tools for pressing -- Guide bushes -- Part 8: Form G* gliding bushes* stepped* type 1
ISO 9448-9:2013 Tools for pressing -- Guide bushes -- Part 9: Form B* ball cage bushes* plain* type 2
ISO 9448-10:2013 Tools for pressing -- Guide bushes -- Part 10: Form E* gliding bushes* flanged* type 2
ISO 9448-11:2013 Tools for pressing -- Guide bushes -- Part 11: Form F* ball cage bushes* flanged* type 2
ISO 9449:2007 Tools for moulding -- Centring sleeves
ISO 10069-1:2008 Tools for pressing -- Elastomer pressure springs -- Part 1: General specification
ISO 10069-2:2008 Tools for pressing -- Elastomer pressure springs -- Part 2: Specification of accessories
ISO 10071-1:2008 Tools for pressing -- Ball-lock punches -- Part 1: Ball-lock punches for light duty
ISO 10071-2:2005 Tools for pressing -- Ball-lock punches -- Part 2: Ball-lock punches for heavy duty
ISO 10072:2004 Tools for moulding -- Sprue bushes -- Dimensions
ISO 10073:2008 Tools for moulding -- Support pillars
ISO 10242-1:2011 Tools for pressing -- Punch holder shanks -- Part 1: Type A
ISO 10242-2:2008 Tools for pressing -- Punch holder shanks -- Part 2: Type C
ISO 10242-3:2008 Tools for pressing -- Punch holder shanks -- Part 3: Type D
ISO 10243:2010 Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and colour coding
ISO 10243:2010/Amd 1:2011 Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and colour coding
ISO 10907-1:2008 Tools for moulding -- Locating rings -- Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)
ISO 10907-2:2007 Tools for moulding -- Locating rings -- Part 2: Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
ISO 11415:1997 Tools for pressing -- Die sets
ISO 11900-1:2007 Tools for pressing -- Ball-lock punch retainers -- Part 1: Types A and B* rectangular and square for light duty
ISO 11900-2:2008 Tools for pressing -- Ball-lock punch retainers -- Part 2: Types C and D* reduced for light duty
ISO 11900-3:2004 Tools for pressing -- Ball-lock punch retainers -- Part 3: Type E* reduced for heavy duty
ISO 11901-1:2003 Tools for pressing -- Gas springs -- Part 1: General specifications
ISO 11901-2:2004 Tools for pressing -- Gas springs -- Part 2: Specification of accessories
ISO 11901-3:2014 Tools for pressing -- Gas springs -- Part 3: Gas spring with increased spring force and compact built height
ISO 11901-4:2014 Tools for pressing -- Gas springs -- Part 4: Gas springs with increased spring force and same built height
ISO 11903:2008 Tools for pressing -- Guide pillar mountings
ISO 12165:2000 Tools for moulding -- Components of compression and injection moulds and diecasting dies -- Terms and symbols
ISO 15600:2000 Tools for moulding -- Thermal insulating sheets for injection moulds
ISO 16366:2008 Tools for pressing -- L-shaped guides
ISO 16367:2008 Tools for pressing -- Guide plates -- U- and V-blocks
ISO 16915:2003 Tools for moulding -- Sprue pullers
ISO 16916:2016 Tools for moulding -- Tool specification sheet for injection moulds
ISO 18084:2011 Press tools for tablets -- Punches and dies
ISO 23480:2013 Tools for pressing -- Sliding plates
ISO 23481:2013 Tools for pressing -- Cam driver plates
ISO 24233:2008 Tools for moulding -- Tool specification sheet for diecasting dies
ISO 28238:2010 Compression and injection moulds -- Components for gating systems
Tools with defined cutting edges* cutting items
ISO 235:2016 Parallel shank jobber and stub series drills and Morse taper shank drills
ISO 236-2:2013 Reamers -- Part 2: Long fluted machine reamers with Morse taper shanks
ISO 240:2016 Milling cutters -- Interchangeability dimensions for cutter arbors or cutter mandrels
ISO 242:2014 Carbide tips for brazing on turning tools
ISO 243:2014 Turning tools with carbide tips -- External tools
ISO 494:2017 Cylindrical shank twist drills -- Long series
ISO 504:1975 Turning tools with carbide tips -- Designation and marking
ISO 513:2012 Classification and application of hard cutting materials for metal removal with defined cutting edges -- Designation of the main groups and groups of application
ISO 514:2014 Turning tools with carbide tips -- Internal tools
ISO 521:2011 Machine chucking reamers with cylindrical shanks and Morse taper shanks
ISO 522:1975 Special tolerances for reamers
ISO 529:1993 Short machine taps and hand taps
ISO 866:2016 Centre drills for centre holes without protecting chamfers -- Type A
ISO 883:2013 Indexable hardmetal (carbide) inserts with rounded corners* without fixing hole -- Dimensions
ISO 1641-1:2016 End mills and slot drills -- Part 1: Milling cutters with cylindrical shanks
ISO 1641-2:2011 End mills and slot drills -- Part 2: Dimensions and designation of milling cutters with Morse taper shanks
ISO 1641-3:2011 End mills and slot drills -- Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks
ISO 1832:2017 Indexable inserts for cutting tools -- Designation
ISO 2238:2011 Machine bridge reamers
ISO 2250:2017 Finishing reamers for Morse and metric tapers* with cylindrical shanks and Morse taper shanks
ISO 2283:2000 Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in -- Reduced shank taps
ISO 2284:2017 Hand taps for parallel and taper pipe threads -- General dimensions and marking
ISO 2296:2011 Metal slitting saws with fine and coarse teeth -- Metric series
ISO 2306:1972 Drills for use prior to tapping screw threads
ISO 2336-2:2006 ****saw blades -- Part 2: Dimensions for machine blades
ISO 2402:1972 Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers
ISO 2540:2016 Centre drills for centre holes with protecting chamfer -- Type B
ISO 2541:2016 Centre drills for centre holes with radius form -- Type R
ISO 2568:1988 Hand- and machine-operated circular screwing dies and hand-operated die stocks
ISO 2585:1972 Slotting cutters with plain bore and key drive -- Metric series
ISO 2586:1985 Shell end mills with plain bore and tenon drive -- Metric series
ISO 2587:1972 Side and face milling cutters with plain bore and key drive -- Metric series
ISO 2780:2006 Milling cutters with tenon drive -- Interchangeability dimensions for cutter arbors -- Metric series
ISO 2857:1973 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches -- Manufacturing tolerances on the threaded portion
ISO 2924:1973 Solid and segmental circular saws for cold cutting of metals -- Interchangeability dimensions of the drive -- Saw diameter range 224 to 2 240 mm
ISO 2935:1974 Circular saw blades for woodworking -- Dimensions
ISO 3286:2016 Single point cutting tools -- Corner radii
ISO 3291:2016 Extra-long Morse taper shank twist drills
ISO 3293:2016 Morse taper shank countersinks for angles 60 degrees* 90 degrees and 120 degrees inclusive
ISO 3294:2016 Parallel shank countersinks for angles 60* 90 and 120 degrees inclusive
ISO 3295:1975 Narrow bandsaw blades for woodworking -- Dimensions
ISO 3314:1975 Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive
ISO 3337:2000 T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole
ISO 3364:2011 Indexable hardmetal (carbide) inserts with rounded corners* with cylindrical fixing hole -- Dimensions
ISO 3365:2016 Indexable hardmetal (carbide) inserts with wiper edges* without fixing hole -- Dimensions
ISO 3438:2013 Subland twist drills for holes prior to tapping screw threads
ISO 3465:1975 Hand taper pin reamers
ISO 3466:2016 Machine taper pin reamers with parallel shanks
ISO 3467:2016 Machine taper pin reamers with Morse taper shanks
ISO 3685:1993 Tool-life testing with single-point turning tools
ISO 3855:1977 Milling cutters -- Nomenclature
ISO 3859:2000 Inverse dovetail cutters and dovetail cutters with cylindrical shanks
ISO 3860:2011 Bore cutters with key drive -- Form milling cutters with constant profile
ISO 3940:1977 Tapered die-sinking cutters with parallel shanks
ISO 4205:2016 Countersinks* 90°* with parallel shanks and solid pilots
ISO 4207:2016 Counterbores with Morse taper shanks and detachable pilots
ISO 4208:1977 Detachable pilots for use with counterbores and 90 degrees countersinks -- Dimensions
ISO 4230:2016 Hand- and machine-operated circular screwing dies for taper pipe threads -- R series
ISO 4231:2016 Hand- and machine-operated circular screwing dies for parallel pipe threads -- G series
ISO 4875-1:2006 Metal-cutting band saw blades -- Part 1: Vocabulary
ISO 4875-2:2006 Metal-cutting band saw blades -- Part 2: Characteristics and dimensions
ISO 5396:1977 Hardmetal heading dies -- Terminology
ISO 5407:1981 As-sintered hardmetal pellets used in heading dies -- Dimensions and tolerances
ISO 5419:1982 Twist drills -- Terms* definitions and types
ISO 5419:1982/Cor 1:1996 Twist drills -- Terms* definitions and types
ISO 5420:1983 Reamers -- Terms* definitions and types
ISO 5421:1977 Ground high speed steel tool bits
ISO 5468:2017 Rotary and rotary impact masonry drill bits with hardmetal tips -- Dimensions
ISO 5608:2012 Turning and copying tool holders and cartridges for indexable inserts -- Designation
ISO 5609-1:2012 Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 1: Designation* styles* dimensions and calculation for corrections
ISO 5609-2:2012 Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 2: Style F
ISO 5609-3:2012 Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 3: Style K
ISO 5609-4:2012 Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 4: Style L
ISO 5609-5:2012 Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 5: Style U
ISO 5609-6:2012 Tool holders for internal turning with cylindrical shank for indexable inserts -- Part 6: Style Q
ISO 5610-1:2014 Tool holders with rectangular shank for indexable inserts -- Part 1: General survey* correlation and determination of dimensions
ISO 5610-2:2014 Tool holders with rectangular shank for indexable inserts -- Part 2: Style A
ISO 5610-3:2014 Tool holders with rectangular shank for indexable inserts -- Part 3: Style B
ISO 5610-4:2014 Tool holders with rectangular shank for indexable inserts -- Part 4: Style D
ISO 5610-5:2014 Tool holders with rectangular shank for indexable inserts -- Part 5: Style F
ISO 5610-6:2014 Tool holders with rectangular shank for indexable inserts -- Part 6: Style G
ISO 5610-7:2014 Tool holders with rectangular shank for indexable inserts -- Part 7: Style J
ISO 5610-8:2014 Tool holders with rectangular shank for indexable inserts -- Part 8: Style K
ISO 5610-9:2014 Tool holders with rectangular shank for indexable inserts -- Part 9: Style L
ISO 5610-10:2014 Tool holders with rectangular shank for indexable inserts -- Part 10: Style N
ISO 5610-11:2014 Tool holders with rectangular shank for indexable inserts -- Part 11: Style R
ISO 5610-12:2014 Tool holders with rectangular shank for indexable inserts -- Part 12: Style S
ISO 5610-13:2014 Tool holders with rectangular shank for indexable inserts -- Part 13: Style T
ISO 5610-14:2014 Tool holders with rectangular shank for indexable inserts -- Part 14: Style H
ISO 5610-15:2014 Tool holders with rectangular shank for indexable inserts -- Part 15: Style V
ISO 5611-1:2015 Cartridges* type A* for indexable inserts -- Part 1: General survey* correlation and determination of dimensions
ISO 5611-2:2015 Cartridges* type A* for indexable inserts -- Part 2: Style F
ISO 5611-3:2015 Cartridges* type A* for indexable inserts -- Part 3: Style G
ISO 5611-4:2015 Cartridges* type A* for indexable inserts -- Part 4: Style J
ISO 5611-5:2015 Cartridges* type A* for indexable inserts -- Part 5: Style K
ISO 5611-6:2015 Cartridges* type A* for indexable inserts -- Part 6: Style L
ISO 5611-7:2015 Cartridges* type A* for indexable inserts -- Part 7: Style R
ISO 5611-8:2015 Cartridges* type A* for indexable inserts -- Part 8: Style S
ISO 5611-9:2015 Cartridges* type A* for indexable inserts -- Part 9: Style T
ISO 5611-10:2015 Cartridges* type A* for indexable inserts -- Part 10: Style U
ISO 5611-11:2015 Cartridges* type A* for indexable inserts -- Part 11: Style W
ISO 5611-12:2015 Cartridges* type A* for indexable inserts -- Part 12: Style Y
ISO 5967:1981 Taps and thread cutting -- Nomenclature of the main types and terminology
ISO 5968:1981 Circular screwing dies -- Terminology
ISO 5969:1979 Ground thread taps for pipe threads G series and Rp series -- Tolerances on the threaded portion
ISO 6108:1978 Double equal angle cutters with plain bore and key drive
ISO 6262-1:2013 End mills with indexable inserts -- Part 1: End mills with flatted cylindrical shank
ISO 6262-2:2013 End mills with indexable inserts -- Part 2: End mills with Morse taper shank
ISO 6462:2011 Face and shoulder milling cutters with indexable inserts -- Dimensions
ISO 6986:2013 Side and face milling (slotting) cutters with indexable inserts -- Dimensions
ISO 6987:2012 Indexable hard material inserts with rounded corners* with partly cylindrical fixing hole -- Dimensions
ISO 7226:1988 Hexagonal dienuts
ISO 7294:1983 Saw teeth for woodworking saws -- Profile shape -- Terminology and designation
ISO 7755-1:2013 Hardmetal burrs -- Part 1: General specifications
ISO 7755-2:2013 Hardmetal burrs -- Part 2: Cylindrical burrs (style A)
ISO 7755-3:2013 Hardmetal burrs -- Part 3: Cylindrical round- (ball-) nose burrs (style C)
ISO 7755-4:2013 Hardmetal burrs -- Part 4: Spherical burrs (style D)
ISO 7755-5:2013 Hardmetal burrs -- Part 5: Oval burrs (style E)
ISO 7755-6:2013 Hardmetal burrs -- Part 6: Arch round- (ball-) nose burrs (style F)
ISO 7755-7:2013 Hardmetal burrs -- Part 7: Arch pointed-nose burrs (style G)
ISO 7755-8:2013 Hardmetal burrs -- Part 8: Flame burrs (style H)
ISO 7755-9:2013 Hardmetal burrs -- Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)
ISO 7755-10:2013 Hardmetal burrs -- Part 10: Conical round- (ball-) nose burrs (style L)
ISO 7755-11:2013 Hardmetal burrs -- Part 11: Conical pointed-nose burrs (style M)
ISO 7755-12:2013 Hardmetal burrs -- Part 12: Inverted cone burrs (style N)
ISO 8051:2016 Long shank taps with nominal diameters from M3 to M10 -- Full-diameter shank taps with recess
ISO 8688-1:1989 Tool life testing in milling -- Part 1: Face milling
ISO 8688-2:1989 Tool life testing in milling -- Part 2: End milling
ISO 8830:1991 High-speed steel machine taps with ground threads -- Technical specifications
ISO 9361-1:2014 Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 1: Dimensions of inserts without fixing hole
ISO 9361-2:2011 Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 2: Dimensions of inserts with cylindrical fixing hole
ISO 9766:2012 Drills with indexable inserts -- Cylindrical shanks with a parallel flat
ISO 10145-1:2016 End mills with brazed helical hardmetal tips -- Part 1: Dimensions of end mills with parallel shank
ISO 10145-2:2016 End mills with brazed helical hardmetal tips -- Part 2: Dimensions of end mills with 7/24 taper shank
ISO 10898:2016 Spot drills
ISO 10899:1996 High-speed steel two-flute twist drills -- Technical specifications
ISO 10910:1995 Classification and designation of approximate chip control zones for indexable inserts with chipbreakers
ISO 10911:2010 Solid hardmetal end mills with cylindrical shank -- Dimensions
ISO 11054:2006 Cutting tools -- Designation of high-speed steel groups
ISO 11529:2013 Milling cutters -- Designation -- Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges
ISO 12197:2016 Woodruff keyseat cutters -- Dimensions
ISO 15641:2001 Milling cutters for high speed machining -- Safety requirements
ISO 15917:2012 Solid ball-nosed end mills with cylindrical shanks* made of carbide and ceramic materials
ISO 16462:2014 Cubic boron nitride inserts* tipped or solid -- Dimensions* types
ISO 16463:2014 Polycristalline diamond inserts* tipped -- Dimensions* types
ISO 22037:2007 Solid end mills with corner radii and cylindrical shanks made of hard cutting materials -- Dimensions
Assembly tools for screws and nuts* pliers and nippers
ISO 691:2005 Assembly tools for screws and nuts -- Wrench and socket openings -- Tolerances for general use
ISO 1085:2016 Assembly tools for screws and nuts -- Double-ended wrenches -- Size pairing
ISO 1173:2001 Assembly tools for screws and nuts -- Drive ends for hand- and machine-operated screwdriver bits and connecting parts -- Dimensions* torque testing
ISO 1174-1:2011 Assembly tools for screws and nuts -- Driving squares -- Part 1: Driving squares for hand socket tools
ISO 1174-2:1996 Assembly tools for screws and nuts -- Driving squares -- Part 2: Driving squares for power socket tools
ISO 1703:2005 Assembly tools for screws and nuts -- Designation and nomenclature
ISO 1711-1:2016 Assembly tools for screws and nuts -- Technical specifications -- Part 1: Hand-operated wrenches and sockets
ISO 1711-2:2016 Assembly tools for screws and nuts -- Technical specifications -- Part 2: Machine-operated sockets (impact)
ISO 2236:1991 Assembly tools for screws and nuts -- Forged and tubular socket wrenches -- Maximum outside head dimensions
ISO 2351-1:2007 Assembly tools for screws and nuts -- Machine-operated screwdriver bits -- Part 1: Screwdriver bits for slotted head screws
ISO 2351-2:2002 Assembly tools for screws and nuts -- Machine-operated screwdriver bits -- Part 2: Screwdriver bits for cross-recessed head screws
ISO 2351-3:2014 Assembly tools for screws and nuts -- Machine-operated screwdriver bits -- Part 3: Screwdriver bits for hexagon socket screws
ISO 2380-1:2004 Assembly tools for screws and nuts -- Screwdrivers for slotted-head screws -- Part 1: Tips for hand- and machine-operated screwdrivers
ISO 2380-2:2004 Assembly tools for screws and nuts -- Screwdrivers for slotted-head screws -- Part 2: General requirements* lengths of blades and marking of hand-operated screwdrivers
ISO 2725-1:2015 Assembly tools for screws and nuts -- Square drive sockets -- Part 1: Hand-operated sockets
ISO 2725-2:2015 Assembly tools for screws and nuts -- Square drive sockets -- Part 2: Machine-operated sockets ("impact")
ISO 2725-3:2015 Assembly tools for screws and nuts -- Square drive sockets -- Part 3: Machine-operated sockets ("non-impact")
ISO 2936:2014 Assembly tools for screws and nuts -- Hexagon socket screw keys
ISO 3315:2011 Assembly tools for screws and nuts -- Driving parts for hand-operated square drive socket wrenches -- Dimensions and tests
ISO 3316:2012 Assembly tools for screws and nuts -- Attachments for hand-operated square drive socket wrenches -- Dimensions and tests
ISO 3317:2015 Assembly tools for screws and nuts -- Square drive adaptor with hexagon or cylindrical flat drive* for power socket wrenches
ISO 3318:2016 Assembly tools for screws and nuts -- Open-ended wrenches* box wrenches and combination wrenches -- Maximum widths of heads
ISO 4228:1986 Spanners and wrenches -- Spline drive ends for power socket wrenches
ISO 4229:2009 Assembly tools for screws and nuts -- Single-head engineer's wrenches for lower torque applications -- Maximum outside dimensions of heads and test torques
ISO 5742:2004 Pliers and nippers -- Nomenclature
ISO 5743:2004 Pliers and nippers -- General technical requirements
ISO 5744:2004 Pliers and nippers -- Methods of test
ISO 5745:2004 Pliers and nippers -- Pliers for gripping and manipulating -- Dimensions and test values
ISO 5746:2004 Pliers and nippers -- Engineer's and "Lineman's" pliers -- Dimensions and test values
ISO 5747:1995 Pliers and nippers -- Lever assisted side cutting pliers* end and diagonal cutting nippers -- Dimensions and test values
ISO 5748:2004 Pliers and nippers -- End cutting nippers -- Dimensions and test values
ISO 5749:2004 Pliers and nippers -- Diagonal cutting nippers -- Dimensions and test values
ISO 6787:2001 Assembly tools for screws and nuts -- Adjustable wrenches
ISO 6788:1997 Assembly tools for screws and nuts -- Four-way socket wrenches -- Dimensions and torque test
ISO 6789-1:2017 Assembly tools for screws and nuts -- Hand torque tools -- Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance
ISO 6789-2:2017 Assembly tools for screws and nuts -- Hand torque tools -- Part 2: Requirements for calibration and determination of measurement uncertainty
ISO 7738:2015 Assembly tools for screws and nuts -- Combination wrenches -- Lengths of wrenches and maximum thickness of heads
ISO 8764-1:2004 Assembly tools for screws and nuts -- Screwdrivers for cross-recessed head screws -- Part 1: Driver tips
ISO 8764-2:2004 Assembly tools for screws and nuts -- Screwdrivers for cross-recessed head screws -- Part 2: General requirements* lengths of blades and marking of hand-operated screwdrivers
ISO 8976:2004 Pliers and nippers -- Multiple slip joint pliers -- Dimensions and test values
ISO 8979:2004 Pliers and nippers for electronics -- Nomenclature
ISO 9242:1988 Pliers and nippers -- Construction worker's pincers -- Dimensions and test values
ISO 9243:1988 Pliers and nippers -- Carpenter's pincers -- Dimensions and test values
ISO 9343:2004 Pliers and nippers -- Slip joint pliers -- Dimensions and test values
ISO 9654:2004 Pliers and nippers for electronics -- Single-purpose nippers -- Cutting nippers
ISO 9655:2004 Pliers and nippers for electronics -- Single-purpose pliers -- Pliers for gripping and manipulating
ISO 9656:2004 Pliers and nippers for electronics -- Test methods
ISO 9657:2004 Pliers and nippers for electronics -- General technical requirements
ISO 10102:2001 Assembly tools for screws and nuts -- Double-headed open-ended engineers' wrenches -- Length of wrenches and thickness of the heads
ISO 10103:2001 Assembly tools for screws and nuts -- Double-headed* flat and offset* box wrenches -- Length of wrenches and thickness of the heads
ISO 10104:2001 Assembly tools for screws and nuts -- Double-headed* deep offset and modified offset* box wrenches -- Length of wrenches and thickness of the heads
ISO 10914:1996 Assembly tools for screws and nuts -- Sockets and wrenches for spline drive
ISO 11168:1995 Socket wrenches for spark- and glow-plugs
ISO 15601:2000 Hammers -- Technical specifications concerning steel hammer heads -- Test procedures
Reply With Quote
Bookmarks