Help in Transformer Calculations/Modeling

[kuchow]

Can you please help model this transformer in PSCAD?

A single phase 10 kVA 20kV/110V 50 Hz transformer. primary resistor = 5000 ohms * primary inductance = 10000 H* secondary resistor = 0.2 ohms * secondary inductance = 10 H* Exciting Current 0.5%.

I need to compute PU leakage reactance X12 (or PU Impedance Zpu??)* PU Copper Losses and PU No-Load Core Losses as the transformer model in PSCAD requires this.

[surgeArrester]

..................................


Sent from my iPad using Tapatalk

[BabyBear]

Can you please help model this transformer in PSCAD?

A single phase 10 kVA 20kV/110V 50 Hz transformer. primary resistor = 5000 ohms * primary inductance = 10000 H* secondary resistor = 0.2 ohms * secondary inductance = 10 H* Exciting Current 0.5%.

I need to compute PU leakage reactance X12 (or PU Impedance Zpu??)* PU Copper Losses and PU No-Load Core Losses as the transformer model in PSCAD requires this.

Your primary and secondary resistance and inductance seems to be a very large value. Is this an assignment?

[surgeArrester]

thats why i didnt reply.. he doesnt even know how to calculate per unit copper loss despite he has already the resistance. he didnt even bother to calculate..


Sent from my iPad using Tapatalk

[nafamesaoud@hotmail.fr]

first choose your base value (primary or secondary side) then divide your actual values by the base value to have your pu values

[user82]

I have seen this same question asked now on three different forums !

[BabyBear]

I have seen this same question asked now on three different forums !

Hahaha