full list:

EN 23-1:1978 Packages for washing and cleaning powders - Dimensions and volumes of cartons and drums from fibre board
EN 76:1978 Packages for certain prepacked foodstuffs - Capacities of glass and metal containers
EN ISO 90-1:1999 Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans (ISO 90-1:1997)
EN ISO 90-2:1999 Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers (ISO 90-2:1997)
EN ISO 90-3:2001 Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000)
EN ISO 445:2013 Pallets for materials handling - Vocabulary (ISO 445:2013)
EN ISO 780:2015 Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015)
EN 862:2016 Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
EN ISO 2233:2001 Packaging - Complete* filled transport packages and unit loads - Conditioning for testing (ISO 2233:2000)
EN ISO 2234:2002 Packaging - Complete* filled transport packages and unit loads - Stacking tests using a static load (ISO 2234:2000)
EN ISO 2244:2002 Packaging - Complete* filled transport packages and unit loads - Horizontal impact tests (ISO 2244:2000)
EN ISO 2247:2002 Packaging - Complete* filled transport packages and unit loads - Vibration tests at fixed low frequency (ISO 2247:2000)
EN ISO 2873:2002 Packaging - Complete* filled transport packages and unit loads - Low pressure test (ISO 2873:2000)
EN ISO 2875:2002 Packaging - Complete* filled transport packages and unit loads - Water-spray test (ISO 2875:2000)
CR 1460:1994 Packaging - Energy recovery from used packaging
EN ISO 4180:2010 Packaging - Complete* filled transport packages - General rules for the compilation of performance test schedules (ISO 4180:2009)
EN ISO 7458:2004 Glass containers - Internal pressure resistance - Test methods (ISO/FDIS 7458:2004)
EN ISO 7459:2004 Glass containers - Thermal shock resistance and thermal shock endurance - Test methods (ISO 7459:2004)
EN ISO 7965-2:1996 Sacks - Drop test - Part 2: Sacks made from thermoplastic flexible film (ISO 7965-2:1993)
EN ISO 8106:2004 Glass containers - Determination of capacity by gravimetric method - Test method (ISO 8106:2004)
EN ISO 8113:2004 Glass containers - Resistance to vertical load - Test method (ISO 8113:2004)
EN ISO 8317:2015 Child-resistant packaging - Requirements and testing procedures for reclosable packages (ISO 8317:2015)
EN ISO 8318:2002 Packaging - Complete* filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency (ISO 8318:2000)
EN ISO 8351-1:1996 Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994)
EN ISO 8351-2:1996 Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8351-2:1994)
EN ISO 8367-1:1996 Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993)
EN ISO 8367-2:1996 Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993)
EN ISO 8611-1:2012 Pallets for materials handling - Flat pallets - Part 1: Test methods (ISO 8611-1:2011)
EN ISO 8611-2:2012 Pallets for materials handling - Flat pallets - Part 2: Performance requirements and selection of tests (ISO 8611-2:2011)
EN ISO 8611-2:2012/A1:2016 Pallets for materials handling - Flat pallets - Part 2: Performance requirements and selection of tests (ISO 8611-2:2011/Amd 1:2016)
EN ISO 8611-3:2012 Pallets for materials handling - Flat pallets - Part 3: Maximum working loads (ISO 8611-3:2011)
EN ISO 9100-1:2005 Glass containers - Vacuum lug finishes - Part 1: General (ISO 9100-1:2005)
EN ISO 9100-2:2005 Glass containers - Vacuum lug finishes - Part 2: 33 medium (ISO 9100-2:2005)
EN ISO 9100-2:2005/AC:2009 Glass containers - Vacuum lug finishes - Part 2: 33 medium - Technical Corrigendum 1 (ISO 9100-2:2005/Cor 1:2009)
EN ISO 9100-3:2005 Glass containers - Vacuum lug finishes - Part 3: 38 regular (ISO 9100-3:2005)
EN ISO 9100-3:2005/AC:2009 Glass containers - Vacuum lug finishes - Part 3: 38 regular - Technical Corrigendum 1 (ISO 9100-3:2005/Cor 1:2009)
EN ISO 9100-4:2005 Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005)
EN ISO 9100-4:2005/AC:2009 Glass containers - Vacuum lug finishes - Part 4: 38 medium - Technical Corrigendum 1 (ISO 9100-4:2005/Cor 1:2009)
EN ISO 9100-5:2005 Glass containers - Vacuum lug finishes - Part 5: 43 and 48 regular (ISO 9100-5:2005)
EN ISO 9100-6:2005 Glass containers - Vacuum lug finishes - Part 6: 53 and 58 regular (ISO 9100-6:2005)
EN ISO 9100-7:2005 Glass containers - Vacuum lug finishes - Part 7: 58 deep (ISO 9100-7:2005)
EN ISO 9100-8:2005 Glass containers - Vacuum lug finishes - Part 8: 63* 66 and 70 regular (ISO 9100-8:2005)
EN ISO 9100-9:2005 Glass containers - Vacuum lug finishes - Part 9: 63* 66 and 70 deep (ISO 9100-9:2005)
EN ISO 9100-10:2005 Glass containers - Vacuum lug finishes - Part 10: 77 regular (ISO 9100-10:2005)
EN ISO 9100-11:2005 Glass containers - Vacuum lug finishes - Part 11: 82 regular (ISO 9100-11:2005)
EN ISO 9100-12:2005 Glass containers - Vacuum lug finishes - Part 12: 89 regular (ISO 9100-12:2005)
EN ISO 9100-13:2005 Glass containers - Vacuum lug finishes - Part 13: 100 regular (ISO 9100-13:2005)
EN ISO 9100-14:2005 Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO 9100-14:2005)
EN ISO 9100-14:2005/AC:2009 Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO 9100-14:2005/Cor 1:2008)
EN ISO 11683:1997 Packaging - Tactile warnings of danger - Requirements (ISO 11683:1997)
EN ISO 11897:2001 Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999)
EN ISO 12048:2000 Packaging - Complete* filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994)
CR 12340:1996 Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems
EN 12374:2009 Packaging - Flexible tubes - Terminology
EN 12375:2009 Packaging - Flexible aluminium tubes - Wall thickness determination method
EN 12377:2014 Packaging - Flexible tubes - Test method for the air tightness of closures
EN 12674-1:1999 Roll containers - Part 1: Terminology
EN 12674-2:2001 Roll containers - Part 2: General design and safety principles
EN 12674-3:2004 Roll containers - Part 3: Test methods
EN 12674-3:2004/AC:2006 Roll containers - Part 3: Test methods
EN 12674-4:2015 Roll containers - Part 4: Performance requirements
EN 12707:2009 Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l
EN 12709:2000 Plastics drums - Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l
EN 12710:2006 Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l
EN 12712:2000 Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm* 1000 mm x 1200 mm and 1140 mm x 1140 mm
EN 12713:2000 Screw cap closure systems for plastics containers with a nominal capacity of 20 l to 60 l
EN 12714:2009 Plastics drums - Removable head (open head) drums with a nominal capacity of 25 L to 60 L
EN 12726:2000 Packaging - Cork mouth finish with a bore diameter of 18*5 mm for corks and tamper evident capsules
EN ISO 12777-1:1996 Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails* other dowel-type fasteners and staples (ISO 12777-1:1994)
EN ISO 12777-1:1996/A1:2008 Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails* other dowel-type fasteners and staples - Amendment 1 (ISO 12777-1:1994/Amd 1:2008)
EN ISO 12777-2:2000 Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples (ISO 12777-2:2000)
EN ISO 12777-3:2002 Methods of test for pallet joints - Part 3: Determination of strength of pallet joints (ISO 12777-3:2002)
EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)
EN ISO 12821:2015 Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2013)
EN 13007:1999 Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l
EN 13008:1999 Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l
EN 13010:2003 Packaging - Unit packaging - Dimensions and requirements for pegboard display
EN 13025-1:2005 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round* cylindrical and tapered general use metal containers up to 40 000 ml
EN 13025-2:2005 Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20 000 ml* 25 000 ml and 30 000 ml
EN 13025-3:2005 Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20 000 ml* 25 000 ml and 30 000 ml
EN 13026:2001 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round* cylindrical and tapered general use metal containers up to 30 000 ml
EN 13027:2001 Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity
EN 13028:2001 Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas* defined by their nominal filling volumes
EN 13028:2001/AC:2002 Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas* defined by their nominal filling volumes
EN 13029:2009 Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures
EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
EN 13046:2000 Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances
EN 13047:2000 Packaging - Flexible conical metallic tubes - Dimensions and tolerances
EN 13048:2009 Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method
EN 13054:2001 Packaging - Complete* filled transport packages - Test methods for the determination of the centre of gravity of a package
EN 13117-1:2000 Transport packaging - Reusable* rigid plastics distribution boxes - Part 1: General purpose application
EN 13117-2:2000 Transport packaging - Reusable* rigid plastics distribution boxes - Part 2: General specifications for testing
EN ISO 13127:2012 Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems (ISO 13127:2012)
EN ISO 13127:2012/AC:2012 Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems - Technical Corrigendum 1 (ISO 13127:2012/Cor 1:2012)
EN 13193:2000 Packaging - Packaging and the environment - Terminology
EN 13199-1:2000 Packaging - Small Load Carrier Systems - Part 1: Common requirements and test methods
EN 13199-2:2000 Packaging - Small Load Carrier Systems - Part 2: Column Stackable System (CSS)
EN 13199-3:2000 Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS)
EN 13246:2001 Packaging - Specification for tensional steel strapping
EN 13247:2001 Packaging - Specification for tensional strapping for lifting* lashing and securing of loads
EN ISO 13274:2013 Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs (ISO 13274:2013)
EN ISO 13274:2013/AC:2014 Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs - Technical Corrigendum 1 (ISO 13274:2013/Cor 1:2014)
EN ISO 13355:2016 Packaging - Complete* filled transport packages and unit loads - Vertical random vibration test (ISO 13355:2016)
EN 13382:2002 Flat pallets for materials handling - Principal dimensions
EN 13393:2001 Packaging - Specification for Edge protectors
EN 13394:2001 Packaging - Specification for non-metallic tensional strapping
EN 13427:2004 Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste
EN 13428:2004 Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction
EN 13429:2004 Packaging - Reuse
EN 13430:2004 Packaging - Requirements for packaging recoverable by material recycling
EN 13431:2004 Packaging - Requirements for packaging recoverable in the form of energy recovery* including specification of minimum inferior calorific value
EN 13432:2000 Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging
EN 13432:2000/AC:2005 Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging
EN 13437:2003 Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart
EN 13439:2003 Packaging - Rate of energy recovery - Definition and method of calculation
EN 13440:2003 Packaging - Rate of recycling - Definition and method of calculation
EN 13461:2009 Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances
CR 13504:2000 Packaging - Material recovery - Criteria for a minimum content of recycled material
EN 13545:2002 Pallet superstructures - Pallet collars - Test methods and performance requirements
EN 13590:2003 Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity
EN 13592:2003+A1:2007 Plastics sacks for household waste collection - Types* requirements and test methods
EN 13592:2003+A1:2007/AC:2008 Plastics sacks for household waste collection - Types* requirements and test methods
EN 13593:2003 Packaging - Paper sacks for household waste collection - Types* requirements and test methods
EN 13626:2003 Packaging - Box pallets - General requirements and test methods
EN 13628-1:2002 Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods
EN 13628-2:2002 Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods
CR 13686:2001 Packaging - Optimization of energy recovery from packaging waste
CEN/TR 13688:2008 Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling
CR 13695-1:2000 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 1: Requirements for measuring and verifying the four heavy metals present in packaging
CEN/TR 13695-2:2004 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging* and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packa
EN 13698-1:2003 Pallet production specification - Part 1: Construction specification for 800 mm x 1200 mm flat wooden pallets
EN 13698-2:2009 Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets
EN 13891:2003 Tensional strapping - Guide to selection and use of tensional strapping
CEN/TR 13910:2010 Packaging - Report on criteria and methodologies for life cycle analysis of packaging
EN 13972:2002 Rigid plastics containers - Definition of nominal* brimful and total capacity and measurement of brimful and total capacity
EN 13973:2002 Rigid plastics containers - Method for determination of drainability
EN 13974:2002 Rigid plastics containers - Specification of tolerance for dimensions* weight and volume
EN 14045:2003 Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions
EN 14046:2003 Packaging - Evaluation of the ultimate aerobic biodegradability of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide
EN 14047:2002 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
EN 14048:2002 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer
EN 14053:2003 Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction
EN 14054:2003 Packaging - Paper and paperboard packaging - Design of cartons
EN 14149:2003 Packaging - Complete* filled transport packages and unit loads - Impact test by rotational drop
EN 14182:2002 Packaging - Terminology - Basic terms and definitions
CR 14311:2002 Packaging - Marking and material identification system
EN 14375:2016 Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing
EN 14391:2004 Packaging - Collapsible aluminium tubes - Tactile warnings of danger
EN 14401:2004 Rigid plastics containers - Methods to test the effectiveness of closures
EN 14477:2004 Packaging - Flexible packaging material - Determination of puncture resistance - Test methods
EN 14479:2004 Packaging - Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography-Absolute method
CEN/TR 14520:2007 Packaging - Reuse - Methods for assessing the performance of a reuse system
EN 14635:2010 Glass packaging - 26 H 126 crown finish - Dimensions
EN 14768:2005 Fibreboard drums - Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 l
EN 14798:2005 Glass packaging - Hand-held crown bottle openers - Dimensions
EN 14847:2005 Aerosol containers - Tinplate containers - Dimensions of the 25*4 mm aperture
EN 14848:2005 Aerosol containers - Metal containers with 25*4 mm aperture - Dimensions of valve cups
EN 14848:2005/AC:2007 Aerosol containers - Metal containers with 25*4 mm aperture - Dimensions of valve cups
EN 14849:2005 Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules
EN 14850:2005 Aerosol containers - Metal containers with 25*4 mm aperture - Measurement of contact height
EN 14854:2005 Aerosol containers - Glass containers - Dimensions of the neck finish
EN 14867:2005 Packaging - Plastic freezer bags - Specifications and test methods
EN 14887:2005 Glass packaging - Cork removal devices - General requirements
EN 14979:2006 Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13
EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25*4 mm aperture
EN 15007:2006 Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
EN 15008:2006 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25*4 mm aperture
EN 15009:2006 Aerosol containers - Compartmented aerosol containers
EN 15010:2006 Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch
EN ISO 15119:2004 Packaging - Sacks - Determination of the friction of filled sacks (ISO 15119:2000)
EN 15384-1:2017 Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test
EN 15384-2:2017 Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2: Copper sulphate test
EN 15385:2007 Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding
EN 15386:2007 Packaging - Flexible laminate and plastic tubes - Test method to determine the print adhesion
EN 15387:2011 Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam
EN 15421:2007 Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering
EN 15433-1:2007 Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 1: General requirements
EN 15433-2:2007 Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 2: Data acquisition and general requirements for measuring equipment
EN 15433-3:2007 Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 3: Data validity check and data editing for evaluation
EN 15433-4:2007 Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 4: Data evaluation
EN 15433-5:2007 Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 5: Derivation of Test Specifications
EN 15433-6:2016 Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports
EN 15507:2008 Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
EN 15543:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
EN 15543:2008/AC:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
EN 15552:2008 Packaging - Complete* filled transport packages and unit loads - Performance testing schedules for common distribution chains
EN 15593:2008 Packaging - Management of hygiene in the production of packaging for foodstuffs - Requirements
EN 15653:2009 Packaging - Flexible aluminium tubes - Test method to check the resistance of the internal protective coating against ammonia
EN ISO 15750-1:2008 Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l* 210 l and 216*5 l (ISO 15750-1:2002)
EN ISO 15750-2:2008 Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l* 216*5 l and 230 l (ISO 15750-2:2002)
EN ISO 15750-3:2008 Packaging - Steel drums - Part 3: Inserted flange-type closure systems (ISO 15750-3:2002)
CEN/TR 15753:2008 Packaging - Package leaflets for *******al products - Braille and other formats for visually impaired people
EN 15766:2009 Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone
EN ISO 15867:2003 Intermediate bulk containers (IBCs) for non-dangerous goods - Terminology (ISO 15867:2003)
CEN/TS 15945:2011 Packaging - Ease of opening - Criteria and test methods for evaluating consumer packaging
EN 16063:2011 Packaging - Rigid plastic containers - Nomenclature of plastic finishes
EN 16064:2011 Packaging - Rigid plastic containers - PET finish 30/25 High (18*5)
EN 16065:2011 Packaging - Rigid plastic containers - PET finish 30/25 Low (16*8)
EN 16066:2011 Packaging - Rigid plastic containers - PET finish 26*7 (lead 6*35)
EN 16067:2011 Packaging - Rigid plastic containers - PET finish 26*7 (lead 9*00)
EN 16068:2011 Packaging - Rigid plastic containers - PET finish 38
EN ISO 16103:2005 Packaging - Transport packages for dangerous goods - Recycled plastics material (ISO 16103:2005)
EN ISO 16106:2006 Packaging - Transport packages for dangerous goods - Dangerous goods packagings* intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 (ISO 16106:2006)
EN 16210:2013 Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipment
EN 16283:2013 Packaging - Flexible aluminium tubes - Test method to measure the force to pierce the membrane
EN 16284:2013 Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
EN 16285:2013 Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)
EN 16287-1:2014 Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 1 finish
EN 16287-2:2014 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 1 finish
EN 16288-1:2014 Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 3 finish
EN 16288-2:2014 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 3 finish
EN 16289:2013 Glass packaging - Screw finishes for pressure capsules - MCA 7*5 RF finish
EN 16290-1:2014 Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 7*5 R finish
EN 16290-2:2014 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 7*5 R finish
EN 16291-1:2013 Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 2 finish
EN 16291-2:2013 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish
EN 16291-2:2013/AC:2014 Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish
EN 16292:2013 Glass packaging - Screw finishes - Depressed threads
EN 16293:2013 Packaging - Glass Packaging - Deep BVS finishes for still wines
CEN/TR 16353:2012 Packaging - Safety guidelines for flexible plastic packaging to minimize the risk of suffocation to children
EN ISO 16495:2013 Packaging - Transport packaging for dangerous goods - Test methods (ISO 16495:2013)
EN 16565:2014 Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap
EN 16592:2014 Packaging - Rigid plastic containers - PET finish 29/25 (12*6)
EN 16593:2014 Packaging - Rigid plastic containers - PET finish BVS 30H60
EN 16594:2014 Packaging - Rigid plastic containers - PET finish 26/22 (12*0)
EN 16679:2014 Packaging - Tamper verification features for *******al product packaging
EN ISO 17351:2014 Packaging - Braille on packaging for *******al products (ISO 17351:2013)
EN ISO 18613:2014 Pallets for materials handling - Repair of flat wooden pallets (ISO 18613:2014)
EN ISO 20848-1:2008 Packaging - Plastics drums - Part 1: Removable head (open head) drums with a nominal capacity of 113*6 l to 220 l (ISO 20848-1:2006)
EN ISO 20848-2:2008 Packaging - Plastics drums - Part 2: Non-removable head (tight head) drums with a nominal capacity of 208*2 l and 220 l (ISO 20848-2:2006)
EN ISO 20848-3:2008 Packaging - Plastics drums - Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113*6 l to 220 l (ISO 20848-3:2006)
EN ISO 21898:2005 Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO 21898:2004)
EN 22206:1992 Packaging - Complete* filled transport packages - Identification of parts when testing (ISO 2206:1987)
EN 22248:1992 Packaging - Complete* filled transport packages - Vertical impact test by dropping (ISO 2248:1985)
EN 22876:1992 Packaging - Complete* filled transport packages - Rolling test (ISO 2876:1985)
EN 24178:1992 Complete* filled transport packages - Distribution trials - Information to be recorded (ISO 4178:1980)
EN 26590-1:1992 Packaging - Sacks - Vocabulary and types - Part 1: Paper sacks (ISO 6590-1:1983)
EN 26590-2:1992 Packaging - Sacks - Vocabulary and types - Part 2: Sacks made from thermoplastic flexible film (ISO 6590-2:1986)
EN 26591-1:1992 Packaging - Sacks - Description and method of measurement - Part 1: Empty paper sacks (ISO 6591-1:1984)
EN 26591-2:1992 Packaging - Sacks - Description and method of measurement - Part 2: Empty sacks made from thermoplastic flexible film (ISO 6591-2:1985)
EN 26599-1:1992 Packaging - Sacks - Conditioning for testing - Part 1: Paper sacks (ISO 6599-1:1983)
EN 27023:1992 Packaging - Sacks - Method of sampling empty sacks for testing (ISO 7023:1983)
EN 27965-1:1992 Packaging - Sacks - Drop test - Part 1: Paper sacks (ISO 7965-1:1984)
EN 28474:1992 Packaging - Complete* filled transport packages - Water immersion test (ISO 8474:1986)
EN 28768:1992 Packaging - Complete* filled transport packages - Toppling test (ISO 8768:1986)
EN 29008:1994 Glass bottles - Verticality - Test method (ISO 9008:1991)
EN 29009:1994 Glass containers - Height and non-parallelism of finish with reference to container base - Test methods (ISO 9009:1991)
EN 29885:1994 Wide-mouth glass containers - Deviation from flatness of top sealing surface - Test methods (ISO 9885:1991)


the missing are:

CR 1460:1994 Packaging - Energy recovery from used packaging
CR 12340:1996 Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems
EN 13028:2001/AC:2002 Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas* defined by their nominal filling volumes
CR 13504:2000 Packaging - Material recovery - Criteria for a minimum content of recycled material
CR 13695-1:2000 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 1: Requirements for measuring and verifying the four heavy metals present in packaging
CR 14311:2002 Packaging - Marking and material identification system
EN 15384-1:2017 Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test
EN 15384-2:2017 Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2: Copper sulphate test


link:

[link Point to another website Only the registered members can access]