full list:
EN 116:2015 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
EN 228:2012 Automotive fuels - Unleaded petrol - Requirements and test methods
EN 237:2004 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry
EN 238:1996 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
EN 238:1996/A1:2003 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
EN 241:2000 Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method
CR 262:1991 Volatility of petrol
EN 589:2008+A1:2012 Automotive fuels - LPG - Requirements and test methods
EN 590:2013 Automotive fuels - Diesel - Requirements and test methods
EN 590:2013/AC:2014 Automotive fuels - Diesel - Requirements and test methods
EN ISO 1516:2002 Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002)
EN ISO 1523:2002 Determination of flash point - Closed cup equilibrium method (ISO 1523:2002)
EN 1601:2014 Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)
EN 1601:2014/AC:2014 Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)
EN ISO 2160:1998 Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)
EN ISO 2592:2001 Determination of flash and fire points - Cleveland open cup method (ISO 2592:2000)
EN ISO 2719:2002 Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2002)
EN ISO 3104:1996 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
EN ISO 3104:1996/AC:1999 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
EN ISO 3170:2004 Petroleum liquids - Manual sampling (ISO 3170:2004)
EN ISO 3171:1999 Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988)
EN ISO 3405:2011 Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011)
EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
EN ISO 3735:1999 Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999)
EN ISO 3830:1995 Petroleum products - Determination of lead content of gasoline - Iodine monochloride method (ISO 3830:1993)
EN ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)
EN ISO 3924:2010 Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO 3924:2010)
EN ISO 3993:1995 Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984)
EN ISO 4256:1998 Liquefied petroleum gases - Determination of gauge pressure - LPG method (ISO 4256:1996)
EN ISO 4257:2001 Liquefied petroleum gases - Method of sampling (ISO 4257:2001)
EN ISO 4257:2001/AC:2007 Liquefied petroleum gases - Method of sampling (ISO 4257:2001/Cor.1:2007)
EN ISO 4259:2006 Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006)
EN ISO 4263-1:2004 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 1: Procedure for mineral oils (ISO 4263-1:2003)
EN ISO 4263-2:2003 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 2: Procedure for category HFC hydraulic fluids (ISO 4263-2:2003)
EN ISO 4263-3:2015 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO 4263-3:2015)
EN ISO 4263-4:2006 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils (ISO 4263-4:2006)
EN ISO 4264:2007 Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:2007)
EN ISO 4264:2007/A1:2013 Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:2007/Amd 1:2013)
EN ISO 4267-2:1995 Petroleum and liquid petroleum products - Calculation of oil quantities - Part 2: Dynamic measurement (ISO 4267-2:1988)
EN ISO 4404-1:2012 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012)
EN ISO 4404-2:2010 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010)
EN ISO 5163:2014 Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014)
EN ISO 5164:2014 Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014)
EN ISO 5165:1998 Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:1998)
EN ISO 6743-4:2015 Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:2015)
EN ISO 6245:2002 Petroleum products - Determination of ash (ISO 6245:2001)
EN ISO 6246:1997 Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method (ISO 6246:1995)
EN ISO 6251:1998 Liquefied petroleum gases - Corrosiveness to copper - Copper strip test (ISO 6251:1996)
EN ISO 6551:1995 Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or elecronic pulsed data (ISO 6551:1982)
EN ISO 7278-1:1995 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 1: General principles (ISO 7278-1:1987)
EN ISO 7278-2:1995 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers (ISO 7278-2:1988)
EN ISO 7536:1996 Petroleum products - Determination of oxidation stability of gasoline - Induction period method (ISO 7536:1994)
EN ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002)
EN ISO 8311:2013 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels - Calibration of membrane tanks and independent prismatic tanks in ships - Manual and internal electro-optical distance-ranging methods (ISO 8311:2013)
EN ISO 8754:2003 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003)
EN ISO 8819:1995 Liquefied petroleum gases - Detection of hydrogen sulfide - Lead acetate method (ISO 8819:1993)
EN ISO 8973:1999 Liquefied petroleum gases - Calculation method for density and vapour pressure (ISO 8973:1997)
EN ISO 9029:1995 Crude petroleum - Determination of water - Distillation method (ISO 9029:1990)
EN ISO 10370:2014 Petroleum products - Determination of carbon residue - Micro method (ISO 10370:2014)
EN 12177:1998 Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography
EN 12177:1998/AC:2000 Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography
EN ISO 12156-1:2016 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016)
EN ISO 12185:1996 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
EN ISO 12205:1996 Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995)
EN 12634:1998 Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method
EN 12662:2014 Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
EN 12766-1:2000 Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD)
EN 12766-2:2001 Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (PCB) content
EN 12766-3:2004 Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron ca
EN 12766-3:2004/AC:2007 Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron ca
EN 12916:2016 Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
EN ISO 12922:2012 Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012)
EN ISO 12937:2000 Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000)
EN 13016-1:2007 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
EN 13016-2:2007 Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute pressure (AVP) between 40 C and 100 C
EN ISO 13032:2012 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012)
EN 13131:2000 Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method
EN 13132:2000 Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching
EN 13723:2002 Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF)
EN ISO 13736:2013 Determination of flash point - Abel closed-cup method (ISO 13736:2013)
EN ISO 13757:1996 Liquefied petroleum gases - Determination of oily residues - High-temperature method (ISO 13757:1996)
EN ISO 13758:1996 Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996)
EN ISO 13759:1996 Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996)
CR 13837:2000 Automotive diesel fuels - Determination of filtrability - SFPP method
CR 13838:2000 Automotive diesel fuels - Determination of filtrability - AGELFI method
CR 13839:2000 Petroleum products - Determination of aromaticity - 13C nuclear magnetic resonance (NMR) spectrometric method
CR 13840:2000 Petroleum products - Determination of polycyclic aromatic hydrocarbons - Ultraviolet (UV) spectrometric method
EN 14077:2003 Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method
EN 14078:2014 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method
EN 14214:2012+A1:2014 Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
EN 14214:2012+A1:2014/AC:2014 Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
EN 14274:2013 Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS)
EN 14274:2013/AC:2013 Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS)
EN 14275:2013 Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers
EN 14331:2004 Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method
CEN/TR 14489:2005 Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment
EN 14538:2006 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)
EN ISO 14596:2007 Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:2007)
EN ISO 14597:1999 Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14597:1997)
EN 14832:2005 Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids
EN 14833:2005 Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids
EN ISO 14935:1998 Petroleum and related products - Determination of wick flame persistence of fire-resistant fluids (ISO 14935:1998)
EN ISO 15029-1:1999 Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistence - Hollow-cone nozzle method (ISO 15029-1:1999)
CEN/TR 15138:2005 Petroleum products and other liquids - Guide to flash point testing
CEN/TR 15139:2005 Petroleum products and other liquids - Applicability of test methods on sulfur determination in petrol and diesel fuel
CEN/TR 15160:2005 Petroleum and related products - Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) - Information and results on round robin tests
EN 15195:2014 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
EN 15199-1:2006 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils
EN 15199-2:2006 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels
EN 15199-3:2008 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil
EN 15199-4:2015 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil
CEN/TS 15293:2011 Automotive fuels - Ethanol (E85) automotive fuel - Requirements and test methods
CEN/TR 15367-1:2014 Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels
CEN/TR 15367-2:2007 Petroleum products - Guide for good housekeeping - Part 2: Automotive petrol fuels
CEN/TR 15367-3:2009 Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination
EN 15376:2014 Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
EN 15469:2007 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection
EN 15470:2007 Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
EN 15471:2007 Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method
EN 15484:2007 Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method
EN 15485:2007 Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method
EN 15486:2007 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
EN 15487:2007 Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method
EN 15488:2007 Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method
EN 15489:2007 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method
EN 15490:2007 Ethanol as a blending component for petrol - Determination of pHe
EN 15491:2007 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
EN 15492:2012 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
EN 15553:2007 Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method
EN 15691:2009 Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method
EN 15692:2009 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method
EN 15721:2013 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
CEN/TR 15738:2008 Petroleum products - Heating fuels - Need, feasibility and required deliverables for a common European specification
CEN/TR 15745:2015 Liquid petroleum products - Determination of hydrocarbon types and oxygenates via multidimensional gas chromatography method - Round Robin research report
EN 15751:2014 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method
EN 15769:2009 Ethanol as a blending component of petrol - Determination of appearance - Visual method
EN 15779:2009+A1:2013 Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (≥4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography
EN 15837:2009 Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
EN 15938:2010 Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity
EN 15940:2016 Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
EN 15944:2010 Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES)
EN 15984:2011 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
CEN/TR 15993:2013 Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination
EN 16091:2011 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method
EN 16135:2011 Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS)
EN 16136:2015 Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method
EN 16143:2013 Petroleum products - Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils - Procedure using double LC cleaning and GC/MS analysis
EN 16144:2012 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method
CEN/TR 16227:2011 Liquid petroleum products - Bio-lubricants - Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants
EN 16270:2015 Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method
EN 16294:2012 Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES)
EN 16300:2012 Automotive fuels - Determination of iodine value in fatty acid methyl esters (FAME) - Calculation method from gas chromatographic data
EN 16329:2013 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
CEN/TR 16366:2012 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Round Robin report on applicability of Rapid Small Scale Oxidation Test method
CEN/TR 16389:2012 Automotive fuels - Paraffinic diesel fuel and blends - Background to the parameters required and their respective limits and determination
EN 16423:2013 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection
CEN/TR 16435:2012 Liquid petroleum products - Oxygenates blending in line with actual EN 228 requirements
EN 16476:2014 Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)
CEN/TR 16514:2013 Automotive fuels - Unleaded petrol containing more than 3,7 % (m/m) oxygen - Roadmap, test methods, and requirements for E10+ petrol
CEN/TR 16557:2013 Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determination
EN 16568:2014 Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C
CEN/TR 16569:2013 Automotive fuels - Assessing the effects of E10 petrol on vehicle emissions and performance
EN 16576:2014 Automotive fuels - Determination of manganese and iron content in diesel - Inductively coupled plasma optical emission spectrometry (ICP OES) method
EN ISO 16591:2010 Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010)
CEN/TR 16680:2014 Liquid petroleum products - Investigation on internal diesel injector sticking deposits mechanisms and the impacts of corrosion inhibitors
EN 16709:2015 Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods
EN 16709:2015/AC:2016 Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods
EN 16715:2015 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
EN 16761-1:2015 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique
EN 16761-2:2015 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique
CEN/TR 16884:2016 Automotive fuels - Diesel fuel - Cold operability testing and fuel performance correlation
CEN/TR 16885:2015 Liquid petroleum products - Investigation on test method for measurement of the oxidation stability of diesel and diesel/FAME blends by Acid Number after ageing
EN ISO 20623:2003 Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions) (ISO 20623:2003)
EN ISO 20763:2004 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004)
EN ISO 20764:2003 Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method (ISO 20764:2003)
EN ISO 20783-1:2011 Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2011)
EN ISO 20783-2:2003 Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003)
EN ISO 20823:2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO 20823:2003)
EN ISO 20843:2011 Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2011)
EN ISO 20844:2015 Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO 20844:2015)
EN ISO 20846:2011 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011)
EN ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004)
EN ISO 20884:2011 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011)
EN ISO 22854:2016 Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel - Multidimensional gas chromatography method (ISO 22854:2016)
EN 23015:1994 Petroleum products - Determination of cloud point (ISO 3015:1992)
EN 27941:1993 Commercial propane and butane - Analysis by gas chromatography (ISO 7941:1988)
missing are:
CR 262:1991 Volatility of petrol
CR 13837:2000 Automotive diesel fuels - Determination of filtrability - SFPP method
CR 13838:2000 Automotive diesel fuels - Determination of filtrability - AGELFI method
CR 13839:2000 Petroleum products - Determination of aromaticity - 13C nuclear magnetic resonance (NMR) spectrometric method
CR 13840:2000 Petroleum products - Determination of polycyclic aromatic hydrocarbons - Ultraviolet (UV) spectrometric method
EN 15940:2016 Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
CEN/TR 16389:2012 Automotive fuels - Paraffinic diesel fuel and blends - Background to the parameters required and their respective limits and determination
EN 16709:2015/AC:2016 Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods
links:
[link Point to another website Only the registered members can access]
or
[link Point to another website Only the registered members can access]
Reply With Quote
Bookmarks