pdms 11.6 with ***** ******* download 100% ok

[mojmoj61]

[link Point to another website Only the registered members can access]

[miroko_1978]

Hello,
Thanks for posting link.

Someone commented there is password protection on it.
But after downloading there is no pasword needed.

BTW. Do you know maybe anything about ***** for Bentley Autoplant v8i? There is post on this forum about that but no positive answer as for now...


regards
miroko

[danish]

Hi mojmoj61 and miroko_1978,

After *****, which one I click for running pdms? it ask project name, usrername, password, mdb, module ect.

Waiting for your answer.

Thanks

Danish

[mojmoj61]

Hi danish,
you can use this,

Project: SAM
Username: SAMPLE
Password: SAMPLE
MDB: SAMPLE
Module: Design [ ] read only (unchecked)
Load From: Macro Files

note that Caps Lock must be on.

[danish]

Hi mojmoj61, Thank you very much, I appreciate it.

danish

[MATabish2]

Hi mojmoj61,
Thank U Very Much,
I appreciate it.

[prossly]

You can use these vaues for PDMS,

project: SAM
Username: SYSTEM
Password: XXXXXX
MDB: SAMPLE
Module: Design
Load from: Macro Files

Notes
1- That Caps Lock must be on for all PDMS commands.
2- This SAM module is just " Sample " for training.

Mohamed Mostafa
Piping Design Engineer

[farcebookhenry]

You can use these vaues for PDMS,

project: SAM
Username: SYSTEM
Password: XXXXXX
MDB: SAMPLE
Module: Design
Load from: Macro Files

Notes
1- That Caps Lock must be on for all PDMS commands.
2- This SAM module is just " Sample " for training.

Mohamed Mostafa
Piping Design Engineer

Please help!
1. I unzipped the iso files & then installed Aveva to C:\AVEVA\Pdms11.6
2. I copied CRA and pdms116.crk to C:\AVEVA\Pdms11.6
3. I ran the CRA in dos, no problems
4. Now when I run the program, it exits as soon as it opens
Have I done something wrong?

[mkhurram79]

Yes links is working and software is ok.
I have checked.
Members can download from ******* file with confidence.

[alwaw911]

Please help!
1. I unzipped the iso files & then installed Aveva to C:\AVEVA\Pdms11.6
2. I copied CRA and pdms116.crk to C:\AVEVA\Pdms11.6
3. I ran the CRA in dos, no problems
4. Now when I run the program, it exits as soon as it opens
Have I done something wrong?

SAME here!! ...i don't know how you guys can run it properly ?, the DL is ok the ----- too no pb about that but i CANNOT run pdms at all
and never get the start Screen mentioned to input project username etc...???...so i'm asking
1)did you "just" used the ----- provided (NoFlexLM) or have u a valid License file?
2)or did you install it on a PREVIOUS pdms installation ?
3)and did you configure it ALL-by-yourself or have it done by an Administrator at your office ??

I guess pdms needs a proper License file somehow...no?/
Regards.

[msmmd2000]

Please, does this version work on windows 7 ?
and if not, how can i run it on it

[abyssolanrewaju]

Similar here.I installed d pdms and d ----- but it fails to start.Where can I download a working version