ETAP v11.0

[hb5]

Send it in PM. Thank you very much in advance! :-)

[logikal]

Hi could someone kindly email me the PTW 7.0.2.4 files at aadil.latif@gmail.com.
I will be very grateful

[logikal]

3. Copy *.dll and *.exe files to the \Program Files\Operation Technology Inc\
Etap License Manager 1100\

All the links to PTW 7024 ****** are dead can some one please post a new link or email me the files at aadil.latif@gmail.com

[SUBOK]

Hi all
New to the site; Installed Etap 11 on win7 professional 64bit these are the steps i followed but cannot get past Lic manager.
1. Install Etap and Lic manager
2. Stopped Lic manager in services
3. Coppied "EtapsImt.exe" and "otisvrmsgs.dll" from ETAPSETUP/LM64SETUP/SYSTEM32/DRIVERS to \Program Files\Operation Technology Inc.
4. Configured ECP Printer Port:
a. Never use a interrupt
b. Checked Enable Legacy Plug and Play detection
c. Resources: I/O Range 03BC-03BF and I/O 07BC-07BE
5. Restarted Lic manager in services
6. When running ETAP the following happens:
a. The ETAP License Path Selection pops up with the computer
name checked
b. If i click ok it says ETAP key search gives me the following message:
"License Manger Server: Computer name"
ETAP key is not found or the license manager is not ready!
Please provide assistance to the following email address: bijviljoen@gmail.com

[smzakaullah]

3. Copy *.dll and *.exe files to the \Program Files\Operation Technology Inc\
Etap License Manager 1100\

All the links to PTW 7024 ****** are dead can some one please post a new link or email me the files at aadil.latif@gmail.com

My dear

I tried to send you the ------ files for ETAP and SKM, but may be there is problem is your email address. Send me email on my address smzakaullah@yahoo.com, so that I may send you the required files.

[AlAbabneh]

Please any one help me,
How to install ETAP on windows 7 64bit (please in deatils)?

[logikal]

"All the links to PTW 7024 ****** are dead can some one please post a new link or email me the files at aadil.latif@gmail.com"

Still dont have the file. need it for phd work. Some one kindly help me out here.

[jrtn]

here is the file

[link Point to another website Only the registered members can access]
regards

[logikal]

1. Install Etap and Lic manager
2. Stopped Lic manager in services
3. Coppied "EtapsImt.exe" and "otisvrmsgs.dll" from ETAPSETUP/LM64SETUP/SYSTEM32/DRIVERS to \Program Files\Operation Technology Inc.
4. Configured ECP Printer Port:
a. Never use a interrupt
b. Checked Enable Legacy Plug and Play detection
c. Resources: I/O Range 03BC-03BF and I/O 07BC-07BE
5. Restarted Lic manager in services
6. When running ETAP the following happens:
a. The ETAP License Path Selection pops up with the computer
name checked
b. If i click ok it says ETAP key search gives me the following message:
"License Manger Server: Computer name"
ETAP key is not found or the license manager is not ready!


This is what i did exactly also but it does not work. Can someone kindly tell me where am i going wrong.

[logikal]

Can some one be a little more clear on the steps for the installation

[telemacofinal]

cyme 7 rev 5 install. no --------

[link Point to another website Only the registered members can access]

[smzakaullah]

1. Install Etap and Lic manager
2. Stopped Lic manager in services
3. Coppied "EtapsImt.exe" and "otisvrmsgs.dll" from ETAPSETUP/LM64SETUP/SYSTEM32/DRIVERS to \Program Files\Operation Technology Inc.
4. Configured ECP Printer Port:
a. Never use a interrupt
b. Checked Enable Legacy Plug and Play detection
c. Resources: I/O Range 03BC-03BF and I/O 07BC-07BE
5. Restarted Lic manager in services
6. When running ETAP the following happens:
a. The ETAP License Path Selection pops up with the computer
name checked
b. If i click ok it says ETAP key search gives me the following message:
"License Manger Server: Computer name"
ETAP key is not found or the license manager is not ready!


This is what i did exactly also but it does not work. Can someone kindly tell me where am i going wrong.

You have done a small mistake. You need first of all configure the ECP printer port and after then install ETAP.