Manual of Petroleum Measurement Standards

[somucdm]

thankyou

[f81aa]

Hi mudassar587:

I am sorry I did not address your request before. I do not visit the Laboratory Measurements Forum too often. I usually log in the Safety and Environment Forum.

I uploaded API Manual of Petroleum Measurement Standards chapters 5.2 and 18.1. I do not have chapter 18 "Custody Transfer".

Please download from

[link Point to another website Only the registered members can access]
Regards

[mudassar587]

Dear active member,

Thanks a lot for your consideration and co-opeation
Mudassar

[ghartman]

I am working on a few data points where I need to calculate the corrected API (@ 60F) from an observed API which was taken at a different temperature for crude oil. I also need to calcualte corrected volume as well for which I believe I understand I need the VCF (Volume Correction Factors).

I understand that "Adjunct to D1250 Petroleum Measurement Tables – Volume I" contains Table 5A: Generalized Crude Oils, Correction of Observed API Gravity to API Gravity at 60°F and Table 6A: Generalized Crude Oils, Correction of Volume to 60°F Against API Gravity.

I also understand that "Adjunct to D1250 Petroleum Measurement Tables – Volume X" contains Background, Development, and Computer Documentation and that Volume X actually has the algorithms and equations published for calculating and approximating all of the tables published in the 12 volume Adjunct set.

I don't know how many pages there are to Tables 5A and 6A in Volume 1 but that is what I believe I need. Even better would be the algorithms/equations that generate these particular tables for which I understand is published in Volume 10.

Can someone help me with this??

I only need this data for a one time set of calculations..

Thanks to whoever can help me with this!!
Greg

[Achmad Nur Eddin]

I am working on a few data points where I need to calculate the corrected API (@ 60F) from an observed API which was taken at a different temperature for crude oil. I also need to calcualte corrected volume as well for which I believe I understand I need the VCF (Volume Correction Factors).

I understand that "Adjunct to D1250 Petroleum Measurement Tables – Volume I" contains Table 5A: Generalized Crude Oils, Correction of Observed API Gravity to API Gravity at 60°F and Table 6A: Generalized Crude Oils, Correction of Volume to 60°F Against API Gravity.

I also understand that "Adjunct to D1250 Petroleum Measurement Tables – Volume X" contains Background, Development, and Computer Documentation and that Volume X actually has the algorithms and equations published for calculating and approximating all of the tables published in the 12 volume Adjunct set.

I don't know how many pages there are to Tables 5A and 6A in Volume 1 but that is what I believe I need. Even better would be the algorithms/equations that generate these particular tables for which I understand is published in Volume 10.

Can someone help me with this??

I only need this data for a one time set of calculations..

Thanks to whoever can help me with this!!
Greg

I upload both Vol 1 and Vol 2 for your convnience


API MPMS 11.1 VOL I 1st Ed 1987.pdf 27.9 MB
Chapter 11.1 Vol I 1st Ed 1987 or API STANDARD 2540 / IP200 / ANSI ASTM D 1250
Volume Correction Factors
TABLE 5A - Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60°F
TABLE 6A - Generalized Crude Oils and JP-4 Correction of Volume to 60°F Against API Gravity at 60°F

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

API MPMS 11.1 VOL II 1st Ed 1987.pdf 25.217 MB
Chapter 11.1 Vol II 1st Ed 1987 or API STANDARD 2540 / IP200 / ANSI ASTM D 1250
Volume Correction Factors
TABLE 5B-Generalized Products Correction of Observed API Gravity to API Gravity at 60°F
TABLE 6B-Generalized Products Correction of Volume to 60°F Against API Gravity at 60°F

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[Achmad Nur Eddin]

As requested by Greg thru private message :

API MPMS 11.1 VOL III 1st Ed 1995.pdf 29.415 MB
Chapter 11.1 Vol III 1st Ed 1995 equal to IP 200
Volume Correction Factors
TABLE 6C-Volume Correction Factors for Individual and Special Applications, Volume Correction for MTBE to 60°F
incl.
Chapter 11.1 Vol IX 1st Ed 1995 equal to IP 200
Volume Correction Factors
TABLE 54C Volume Correction Factors for Individual and Special Applications, Volume Correction for MTBE to 15°C

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

API MPMS 11.1 VOL X 1st Ed 1980.pdf 11.76 MB
Chapter 11.1 Vol X 1st Ed 1995 equal to IP 200 / API Std 2540 / ANSI ASTM D-1250
Volume Correction Factors
Volume X-Background, Development, and Program Documentation

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[ghartman]

Thank you very much Mr. Eddin! Very helpful for sure! I hope to soon return the favor..

[okanane]

Dear Achmad Nur Eddin,

I need API STD 2552 ACTV 1/1/1966 (R 2000) Measurement and Calibration of Spheres and Spheroids, Method for ASTM D1408.

[Nabilia]

Dear Achmad Nur Eddin,

I need API STD 2552 ACTV 1/1/1966 (R 2000) Measurement and Calibration of Spheres and Spheroids, Method for ASTM D1408.

[link Point to another website Only the registered members can access]

[okanane]

Hi Nabilia...thank you very much, really!

[sambun]

The link "This limit is reached.", please re-upload to ifile.it !

[Achmad Nur Eddin]

API STD 2552 1st Ed 1966 (R2007).PDF 0.756 MB

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]