ISO TC 6 STANDARDS
ISO 216:2007 Writing paper and certain classes of printed matter -- Trimmed sizes -- A and B series* and indication of machine direction
ISO 217:2013 Paper -- Untrimmed sizes -- Designation and tolerances for primary and supplementary ranges* and indication of machine direction
ISO 302:2015 Pulps -- Determination of Kappa number
ISO 638:2008 Paper* board and pulps -- Determination of dry matter content -- Oven-drying method
ISO 692:1982 Pulps -- Determination of alkali solubility
ISO 699:2015 Pulps -- Determination of alkali resistance
ISO 776:2011 Pulps -- Determination of acid-insoluble ash
ISO 801-1:1994 Pulps -- Determination of saleable mass in lots -- Part 1: Pulp baled in sheet form
ISO 801-2:1994 Pulps -- Determination of saleable mass in lots -- Part 2: Pulps (such as flash-dried pulps) baled in slabs
ISO 801-3:1994 Pulps -- Determination of saleable mass in lots -- Part 3: Unitized bales
ISO 838:1974 Paper -- Holes for general filing purposes -- Specifications
ISO 1762:2015 Paper* board and pulps -- Determination of residue (ash) on ignition at 525 degrees C
ISO 2144:2015 Paper* board and pulps -- Determination of residue (ash) on ignition at 900 degrees C
ISO 2469:2014 Paper* board and pulps -- Measurement of diffuse radiance factor (diffuse reflectance factor)
ISO 2470-1:2016 Paper* board and pulps -- Measurement of diffuse blue reflectance factor -- Part 1: Indoor daylight conditions (ISO brightness)
ISO 2470-2:2008 Paper* board and pulps -- Measurement of diffuse blue reflectance factor -- Part 2: Outdoor daylight conditions (D65 brightness)
ISO 2471:2008 Paper and board -- Determination of opacity (paper backing) -- Diffuse reflectance method
ISO 3260:2015 Pulps -- Determination of chlorine consumption (Degree of delignification)
ISO 3688:1999 Pulps -- Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
ISO 4046-1:2016 Paper* board* pulps and related terms -- Vocabulary -- Part 1: Alphabetical index
ISO 4046-2:2016 Paper* board* pulps and related terms -- Vocabulary -- Part 2: Pulping terminology
ISO 4046-3:2016 Paper* board* pulps and related terms -- Vocabulary -- Part 3: Paper-making terminology
ISO 4046-4:2016 Paper* board* pulps and related terms -- Vocabulary -- Part 4: Paper and board grades and converted products
ISO 4046-5:2016 Paper* board* pulps and related terms -- Vocabulary -- Part 5: Properties of pulp* paper and board
ISO 4094:2005 Paper* board and pulps -- International calibration of testing apparatus -- Nomination and acceptance of standardizing and authorized laboratories
ISO 4119:1995 Pulps -- Determination of stock concentration
ISO 5263-1:2004 Pulps -- Laboratory wet disintegration -- Part 1: Disintegration of chemical pulps
ISO 5263-2:2004 Pulps -- Laboratory wet disintegration -- Part 2: Disintegration of mechanical pulps at 20 degrees C
ISO 5263-3:2004 Pulps -- Laboratory wet disintegration -- Part 3: Disintegration of mechanical pulps at > 85 degrees C
ISO 5264-1:1979 Pulps -- Laboratory beating -- Part 1: Valley beater method
ISO 5264-2:2011 Pulps -- Laboratory beating -- Part 2: PFI mill method
ISO 5267-1:1999 Pulps -- Determination of drainability -- Part 1: Schopper-Riegler method
ISO 5267-1:1999/Cor 1:2001 Pulps -- Determination of drainability -- Part 1: Schopper-Riegler method
ISO 5267-2:2001 Pulps -- Determination of drainability -- Part 2: "Canadian Standard" freeness method
ISO 5269-1:2005 Pulps -- Preparation of laboratory sheets for physical testing -- Part 1: Conventional sheet-former method
ISO 5269-2:2004 Pulps -- Preparation of laboratory sheets for physical testing -- Part 2: Rapid-Köthen method
ISO 5269-3:2008 Pulps -- Preparation of laboratory sheets for physical testing -- Part 3: Conventional and Rapid-Köthen sheet formers using a closed water system
ISO 5270:2012 Pulps -- Laboratory sheets -- Determination of physical properties
ISO 5350-1:2006 Pulps -- Estimation of dirt and shives -- Part 1: Inspection of laboratory sheets by transmitted light
ISO 5350-2:2006 Pulps -- Estimation of dirt and shives -- Part 2: Inspection of mill sheeted pulp by transmitted light
ISO 5350-3:2007 Pulps - Estimation of dirt and shives -- Part 3: Visual inspection by reflected light using Equivalent Black Area (EBA) method
ISO 5350-4:2006 Pulps -- Estimation of dirt and shives -- Part 4: Instrumental inspection by reflected light using Equivalent Black Area (EBA) method
ISO 5351:2010 Pulps -- Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
ISO 5631-1:2015 Paper and board -- Determination of colour by diffuse reflectance -- Part 1: Indoor daylight conditions (C/2 degrees)
ISO 5631-2:2015 Paper and board -- Determination of colour by diffuse reflectance -- Part 2: Outdoor daylight conditions (D65/10 degrees)
ISO 5631-3:2015 Paper and board -- Determination of colour by diffuse reflectance -- Part 3: Indoor illumination conditions (D50/2 degrees)
ISO 5647:1990 Paper and board -- Determination of titanium dioxide content
ISO 6587:1992 Paper* board and pulps -- Determination of conductivity of aqueous extracts
ISO 6588-1:2012 Paper* board and pulps -- Determination of pH of aqueous extracts -- Part 1: Cold extraction
ISO 6588-2:2012 Paper* board and pulps -- Determination of pH of aqueous extracts -- Part 2: Hot extraction
ISO 7213:1981 Pulps -- Sampling for testing
ISO 8254-1:2009 Paper and board -- Measurement of specular gloss -- Part 1: 75 degree gloss with a converging beam* TAPPI method
ISO 8254-2:2016 Paper and board -- Measurement of specular gloss -- Part 2: 75 degree gloss with a parallel beam* DIN method
ISO 8254-3:2016 Paper and board -- Measurement of specular gloss -- Part 3: 20 degree gloss with a converging beam* TAPPI method
ISO 9184-1:1990 Paper* board and pulps -- Fibre furnish analysis -- Part 1: General method
ISO 9184-2:1990 Paper* board and pulps -- Fibre furnish analysis -- Part 2: Staining guide
ISO 9184-3:1990 Paper* board and pulps -- Fibre furnish analysis -- Part 3: Herzberg staining test
ISO 9184-4:1990 Paper* board and pulps -- Fibre furnish analysis -- Part 4: Graff "C" staining test
ISO 9184-5:1990 Paper* board and pulps -- Fibre furnish analysis -- Part 5: Lofton-Merritt staining test (modification of Wisbar)
ISO 9184-6:1994 Paper* board and pulps -- Fibre furnish analysis -- Part 6: Determination of fibre coarseness
ISO 9184-7:1994 Paper* board and pulps -- Fibre furnish analysis -- Part 7: Determination of weight factor
ISO 9197:2016 Paper* board and pulps -- Determination of water-soluble chlorides
ISO 9198:2001 Paper* board and pulp -- Determination of water-soluble sulfates
ISO 9416:2017 Paper -- Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
ISO 10376:2011 Pulps -- Determination of mass fraction of fines
ISO/TR 10688:2015 Paper* board and pulps -- Basic terms and equations for optical properties
ISO 10716:1994 Paper and board -- Determination of alkali reserve
ISO 10775:2013 Paper* board and pulps -- Determination of cadmium content -- Atomic absorption spectrometric method
ISO 11093-1:1994 Paper and board -- Testing of cores -- Part 1: Sampling
ISO 11093-2:1994 Paper and board -- Testing of cores -- Part 2: Conditioning of test samples
ISO 11093-3:1994 Paper and board -- Testing of cores -- Part 3: Determination of moisture content using the oven drying method
ISO 11093-4:2016 Paper and board -- Testing of cores -- Part 4: Measurement of dimensions
ISO 11093-5:2016 Paper and board -- Testing of cores -- Part 5: Determination of characteristics of concentric rotation
ISO 11093-6:2005 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
ISO 11093-7:2011 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
ISO 11093-8:2017 Paper and board -- Testing of cores -- Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
ISO 11093-9:2006 Paper and board -- Testing of cores -- Part 9: Determination of flat crush resistance
ISO/TR 11371:2013 Pulps -- Basic guidelines for laboratory refining
ISO 11475:2017 Paper and board -- Determination of CIE whiteness* D65/10 degrees (outdoor daylight)
ISO 11476:2016 Paper and board -- Determination of CIE whiteness* C/2° (indoor illumination conditions)
ISO 11480:2017 Pulp* paper and board -- Determination of total chlorine and organically bound chlorine
ISO 12830:2011 Paper* board and pulps -- Determination of acid-soluble magnesium* calcium* manganese* iron* copper* sodium and potassium
ISO 13542:2006 Paper and board -- Specification for internal diameters of cores for reels
ISO 14436:2010 Pulps -- Standard tap water for drainability measurements -- Conductivity 40 mS/m to 150 mS/m
ISO 14453:2014 Pulps -- Determination of acetone-soluble matter
ISO 14487:1997 Pulps -- Standard water for physical testing
ISO 15318:1999 Pulp* paper and board -- Determination of 7 specified polychlorinated biphenyls (PCB)
ISO 15320:2011 Pulp* paper and board -- Determination of pentachlorophenol in an aqueous extract
ISO 15360-1:2000 Recycled pulps -- Estimation of Stickies and Plastics -- Part 1: Visual method
ISO 15360-2:2015 Recycled pulps -- Estimation of Stickies and Plastics -- Part 2: Image analysis method
ISO 15361:2000 Pulps -- Determination of zero-span tensile strength* wet or dry
ISO 16065-1:2014 Pulps -- Determination of fibre length by automated optical analysis -- Part 1: Polarized light
ISO 16065-2:2014 Pulps -- Determination of fibre length by automated optical analysis -- Part 2: Unpolarized light method
ISO 17812:2007 Paper* board and pulps -- Determination of total magnesium* total calcium* total manganese* total iron and total copper
ISO 18522:2016 Paper and board -- Automated off-line testing of physical properties for CD (cross direction) profiles
ISO/TS 20460:2015 Paper and board -- Automated on-line testing -- Metrological comparability between standardized measurements and output of on-line gauges
ISO 22754:2008 Pulp and paper -- Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement
ISO 22891:2013 Paper -- Determination of transmittance by diffuse reflectance measurement
ISO 23713:2005 Pulps -- Determination of fibre coarseness by automated optical analysis -- Polarized light method
ISO 23714:2014 Pulps -- Determination of water retention value (WRV)
ISO/TR 24498:2006 Paper* board and pulps -- Estimation of uncertainty for test methods
ISO/TR 25477:2008 Paper* board and pulps - Basic guidelines for image analysis measurements
ISO 29681:2009 Paper* board and pulps -- Determination of pH of salted water extracts


Test methods and quality specifications for paper and board
ISO 186:2002 Paper and board -- Sampling to determine average quality
ISO 187:1990 Paper* board and pulps -- Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
ISO 287:2009 Paper and board -- Determination of moisture content of a lot -- Oven-drying method
ISO 534:2011 Paper and board -- Determination of thickness* density and specific volume
ISO 535:2014 Paper and board -- Determination of water absorptiveness -- Cobb method
ISO 536:2012 Paper and board -- Determination of grammage
ISO 1924-2:2008 Paper and board -- Determination of tensile properties -- Part 2: Constant rate of elongation method (20 mm/min)
ISO 1924-3:2005 Paper and board -- Determination of tensile properties -- Part 3: Constant rate of elongation method (100 mm/min)
ISO 1974:2012 Paper -- Determination of tearing resistance -- Elmendorf method
ISO 2493-1:2010 Paper and board -- Determination of bending resistance -- Part 1: Constant rate of deflection
ISO 2493-2:2011 Paper and board -- Determination of bending resistance -- Part 2: Taber-type tester
ISO 2528:1995 Sheet materials -- Determination of water vapour transmission rate -- Gravimetric (dish) method
ISO 2758:2014 Paper -- Determination of bursting strength
ISO 2759:2014 Board -- Determination of bursting strength
ISO 3034:2011 Corrugated fibreboard -- Determination of single sheet thickness
ISO 3035:2011 Corrugated fibreboard -- Determination of flat crush resistance
ISO 3036:1975 Board -- Determination of puncture resistance
ISO 3037:2013 Corrugated fibreboard -- Determination of edgewise crush resistance (unwaxed edge method)
ISO 3038:1975 Corrugated fibreboard -- Determination of the water resistance of the glue bond by immersion
ISO 3039:2010 Corrugated fibreboard -- Determination of grammage of the component papers after separation
ISO 3689:1983 Paper and board -- Determination of bursting strength after immersion in water
ISO 3781:2011 Paper and board -- Determination of tensile strength after immersion in water
ISO 3783:2006 Paper and board -- Determination of resistance to picking -- Accelerated speed method using the IGT-type tester (electric model)
ISO 5626:1993 Paper -- Determination of folding endurance
ISO 5627:1995 Paper and board -- Determination of smoothness (Bekk method)
ISO 5627:1995/Cor 1:2002 Paper and board -- Determination of smoothness (Bekk method)
ISO 5628:2012 Paper and board -- Determination of bending stiffness -- General principles for two-point* three-point and four-point methods
ISO 5629:1983 Paper and board -- Determination of bending stiffness -- Resonance method
ISO 5630-1:1991 Paper and board -- Accelerated ageing -- Part 1: Dry heat treatment at 105 degrees C
ISO 5630-3:1996 Paper and board -- Accelerated ageing -- Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity
ISO 5630-4:1986 Paper and board -- Accelerated ageing -- Part 4: Dry heat treatment at 120 or 150 degrees C
ISO 5630-5:2008 Paper and board -- Accelerated ageing -- Part 5: Exposure to elevated temperature at 100 degrees C
ISO 5630-6:2009 Paper and board -- Accelerated ageing -- Part 6: Exposure to atmospheric pollution (nitrogen dioxide)
ISO 5630-7:2014 Paper and board -- Accelerated ageing -- Part 7: Exposure to light
ISO 5633:1983 Paper and board -- Determination of resistance to water penetration
ISO 5635:1978 Paper -- Measurement of dimensional change after immersion in water
ISO 5636-3:2013 Paper and board -- Determination of air permeance (medium range) -- Part 3: Bendtsen method
ISO 5636-4:2013 Paper and board -- Determination of air permeance (medium range) -- Part 4: Sheffield method
ISO 5636-5:2013 Paper and board -- Determination of air permeance (medium range) -- Part 5: Gurley method
ISO 5636-6:2015 Paper and board -- Determination of air permeance (medium range) -- Part 6: Oken method
ISO 5637:1989 Paper and board -- Determination of water absorption after immersion in water
ISO 5638:1978 Solid fibreboard -- Determination of grammage of single layers
ISO 7263:2011 Corrugating medium -- Determination of the flat crush resistance after laboratory fluting
ISO 8226-1:1994 Paper and board -- Measurement of hygroexpansivity -- Part 1: Hygroexpansivity up to a maximum relative humidity of 68 %
ISO 8226-2:1990 Paper and board -- Measurement of hygroexpansivity -- Part 2: Hygroexpansivity up to a maximum relative humidity of 86 %
ISO 8784-1:2014 Pulp* paper and board -- Microbiological examination -- Part 1: Enumeration of bacteria and bacterial spores based on disintegration
ISO 8787:1986 Paper and board -- Determination of capillary rise -- Klemm method
ISO 8791-1:1986 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 1: General method
ISO 8791-2:2013 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 2: Bendtsen method
ISO 8791-3:2017 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 3: Sheffield method
ISO 8791-4:2007 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 4: Print-surf method
ISO 9895:2008 Paper and board -- Compressive strength -- Short-span test
ISO 9932:1990 Paper and board -- Determination of water vapour transmission rate of sheet materials -- Dynamic sweep and static gas methods
ISO 11556:2005 Paper and board -- Determination of curl using a single vertically suspended test piece
ISO 12192:2011 Paper and board -- Determination of compressive strength -- Ring crush method
ISO 12625-1:2011 Tissue paper and tissue products -- Part 1: General guidance on terms
ISO 12625-3:2014 Tissue paper and tissue products -- Part 3: Determination of thickness* bulking thickness and apparent bulk density and bulk
ISO 12625-4:2016 Tissue paper and tissue products -- Part 4: Determination of tensile strength* stretch at maximum force and tensile energy absorption
ISO 12625-5:2016 Tissue paper and tissue products -- Part 5: Determination of wet tensile strength
ISO 12625-6:2016 Tissue paper and tissue products -- Part 6: Determination of grammage
ISO 12625-7:2014 Tissue paper and tissue products -- Part 7: Determination of optical properties -- Measurement of brightness and colour with D65/10° (outdoor daylight)
ISO 12625-8:2010 Tissue paper and tissue products -- Part 8: Water-absorption time and water-absorption capacity* basket-immersion test method
ISO 12625-9:2015 Tissue paper and tissue products -- Part 9: Determination of ball burst strength
ISO 12625-11:2012 Tissue paper and tissue products -- Part 11: Determination of wet ball burst strength
ISO 12625-12:2010 Tissue paper and tissue products -- Part 12: Determination of tensile strength of perforated lines -- Calculation of perforation efficiency
ISO 12625-15:2015 Tissue paper and tissue products -- Part 15: Determination of optical properties -- Measurement of brightness and colour with C/2° (indoor daylight) illuminant
ISO 12625-16:2015 Tissue paper and tissue products -- Part 16: Determination of optical properties -- Opacity (paper backing) -- Diffuse reflectance method
ISO 13820:2014 Paper* board and corrugated fibreboard -- Description and calibration of compression-testing equipment
ISO 13821:2002 Corrugated fibreboard -- Determination of edgewise crush resistance -- Waxed edge method
ISO 14968:1999 Paper and board -- Cut-size office paper -- Measurement of curl in a pack of sheets
ISO 15359:1999 Paper and board -- Determination of the static and kinetic coefficients of friction -- Horizontal plane method
ISO 15754:2009 Paper and board -- Determination of z-directional tensile strength
ISO 15755:1999 Paper and board -- Estimation of contraries
ISO 16260:2016 Paper and board -- Determination of internal bond strength
ISO 16532-1:2008 Paper and board -- Determination of grease resistance -- Part 1: Permeability test
ISO 16532-2:2007 Paper and board -- Determination of grease resistance -- Part 2: Surface repellency test
ISO 16532-3:2010 Paper and board -- Determination of grease resistance -- Part 3: Turpentine test for voids in glassine and greaseproof papers
ISO 16945:2014 Paper -- Cut-size office paper -- Measurement of edge quality
ISO/TS 17958:2013 Paper and board -- Determination of fracture toughness -- Constant rate of elongation method (1*7 mm/s)
ISO 22414:2004 Corrugating medium -- Determination of the edge crush resistance after laboratory fluting


the missing are:

ISO 692:1982 Pulps -- Determination of alkali solubility
ISO 838:1974 Paper -- Holes for general filing purposes -- Specifications
ISO 5264-1:1979 Pulps -- Laboratory beating -- Part 1: Valley beater method
ISO 5647:1990 Paper and board -- Determination of titanium dioxide content
ISO 6587:1992 Paper* board and pulps -- Determination of conductivity of aqueous extracts
ISO 9184-6:1994 Paper* board and pulps -- Fibre furnish analysis -- Part 6: Determination of fibre coarseness
ISO/TR 24498:2006 Paper* board and pulps -- Estimation of uncertainty for test methods
ISO 3038:1975 Corrugated fibreboard -- Determination of the water resistance of the glue bond by immersion
ISO 5627:1995 Paper and board -- Determination of smoothness (Bekk method)
ISO 8226-2:1990 Paper and board -- Measurement of hygroexpansivity -- Part 2: Hygroexpansivity up to a maximum relative humidity of 86 %
ISO 8787:1986 Paper and board -- Determination of capillary rise -- Klemm method
ISO 8791-1:1986 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 1: General method
ISO 8791-3:2017 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 3: Sheffield method

[link Point to another website Only the registered members can access]