full list:
EN 107:1980 Methods of testing windows - Mechanical test
EN 130:1984 Methods of testing doors - Test for the change in stiffness of the door leaves by repeated torsion
EN 179:2008 Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
EN 947:1998 Hinged or pivoted doors - Determination of the resistance to vertical load
EN 948:1999 Hinged or pivoted doors - Determination of the resistance to static torsion
EN 949:1998 Windows and curtain walling, doors, blinds and shutters - Determination of the resistance to soft and heavy body impact for doors
EN 950:1999 Door leaves - Determination of the resistance to hard body impact
EN 951:1998 Door leaves - Method for measurement of height, width, thickness and squareness
EN 952:1999 Door leaves - General and local flatness - Measurement method
EN 1026:2016 Windows and doors - Air permeability - Test method
EN 1027:2016 Windows and doors - Water tightness - Test method
EN 1121:2000 Doors - Behaviour between two different climates - Test method
EN 1125:2008 Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
EN 1154:1996 Building hardware - Controlled door closing devices - Requirements and test methods
EN 1154:1996/A1:2002 Building hardware - Controlled door closing devices - Requirements and test methods
EN 1154:1996/A1:2002/AC:2006 Building hardware - Controlled door closing devices - Requirements and test methods
EN 1155:1997 Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
EN 1155:1997/A1:2002 Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
EN 1155:1997/A1:2002/AC:2006 Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
EN 1158:1997 Building hardware - Door coordinator devices - Requirements and test methods
EN 1158:1997/A1:2002 Building hardware - Door coordinator devices - Requirements and test methods
EN 1158:1997/A1:2002/AC:2006 Building hardware - Door coordinator devices - Requirements and test methods
EN 1191:2012 Windows and doors - Resistance to repeated opening and closing - Test method
EN 1192:1999 Doors - Classification of strength requirements
EN 1294:2000 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
EN 1303:2015 Building hardware - Cylinders for locks - Requirements and test methods
EN 1522:1998 Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification
EN 1523:1998 Windows, doors, shutters and blinds - Bullet resistance - Test method
EN 1527:2013 Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods
EN 1529:1999 Doors leaves - Height, width, thickness and squareness - Tolerance classes
EN 1530:1999 Door leaves - General and local flatness - Tolerance classes
EN 1627:2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification
EN 1628:2011+A1:2015 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
EN 1629:2011+A1:2015 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading
EN 1630:2011+A1:2015 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts
EN 1670:2007 Building hardware - Corrosion resistance - Requirements and test methods
EN 1670:2007/AC:2008 Building hardware - Corrosion resistance - Requirements and test methods
EN 1906:2012 Building hardware - Lever handles and knob furniture - Requirements and test methods
EN 1932:2013 External blinds and shutters - Resistance to wind loads - Method of testing and performance criteria
EN 1933:1998 Exterior blinds - Resistance to load due to water accumulation - Test method
EN 1935:2002 Building hardware - Single-axis hinges - Requirements and test methods
EN 1935:2002/AC:2003 Building hardware - Single-axis hinges - Requirements and test methods
EN 12045:2000 Shutters and blinds power operated - Safety in use - Measurement of the transmitted force
EN 12046-1:2003 Operating forces - Test method - Part 1: Windows
EN 12046-2:2000 Operating forces - Test method - Part 2: Doors
EN 12051:1999 Building hardware - Door and window bolts - Requirements and test methods
EN 12152:2002 Curtain walling - Air permeability - Performance requirements and classification
EN 12153:2000 Curtain walling - Air permeability - Test method
EN 12154:1999 Curtain walling - Watertightness - Performance requirements and classification
EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure
EN 12179:2000 Curtain walling - Resistance to wind load - Test method
EN 12194:2000 Shutters, external and internal blinds - Misuse - Test methods
EN 12207:1999 Windows and doors - Air permeability - Classification
EN 12208:1999 Windows and doors - Watertightness - Classification
EN 12209:2016 Building hardware - Mechanically operated locks and locking plates - Requirements and test methods
EN 12210:2016 Windows and doors - Resistance to wind load - Classification
EN 12211:2016 Windows and doors - Resistance to wind load - Test method
EN 12216:2002 Shutters, external blinds, internal blinds - Terminology, glossary and definitions
EN 12217:2015 Doors - Operating forces - Requirements and classification
EN 12219:1999 Doors - Climatic influences - Requirements and classification
EN 12320:2012 Building hardware - Padlocks and padlock fittings - Requirements and test methods
EN 12365-1:2003 Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification
EN 12365-2:2003 Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods
EN 12365-3:2003 Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method
EN 12365-4:2003 Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method
EN 12400:2002 Windows and pedestrian doors - Mechanical durability - Requirements and classification
EN 12424:2000 Industrial, commercial and garage doors and gates - Resistance to wind load - Classification
EN 12425:2000 Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification
EN 12426:2000 Industrial, commercial and garage doors and gates - Air permeability - Classification
EN 12427:2000 Industrial, commercial and garage doors and gates - Air permeability - Test method
EN 12428:2013 Industrial, commercial and garage doors - Thermal transmittance - Requirements for the calculation
EN 12433-1:1999 Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors
EN 12433-2:1999 Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors
EN 12444:2000 Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation
EN 12445:2000 Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods
EN 12453:2000 Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements
EN 12489:2000 Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method
EN 12519:2004 Windows and pedestrian doors - Terminology
EN 12604:2000 Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements
EN 12605:2000 Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods
EN 12608-1:2016 Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
EN 12635:2002+A1:2008 Industrial, commercial and garage doors and gates - Installation and use
EN 12833:2001 Skylight and conservatory roller shutters - Resistance to snow load - Test method
EN 12835:2000 Airtight shutters - Air permeability test
EN 12978:2003+A1:2009 Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods
EN 13049:2003 Windows - Soft and heavy body impact - Test method, safety requirements and classification
EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
EN 13051:2001 Curtain Walling - Watertightness - Site test
EN 13115:2001 Windows - Classification of mechanical properties - Racking, torsion and operating forces
EN 13116:2001 Curtain walling - Resistance to wind load - Performance requirements
EN 13119:2007 Curtain walling - Terminology
EN 13120:2009+A1:2014 Internal blinds - Performance requirements including safety
EN 13120:2009+A1:2014/AC:2015 Internal blinds - Performance requirements including safety
EN 13123-1:2001 Windows, doors and shutters - Explosion resistance - Requirements and classification - Part 1: Shock tube
EN 13123-2:2004 Windows, doors, and shutters - Explosion resistance - Requirements and classification - Part 2: Range test
EN 13124-1:2001 Windows, doors and shutters - Explosion resistance - Test method - Part 1: Shock tube
EN 13124-2:2004 Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test
EN 13125:2001 Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product
EN 13126-1:2011 Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware
EN 13126-2:2011 Building hardware - Requirements and test methods for windows and doors height windows - Part 2: Window fastener handles
EN 13126-3:2011 Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware
EN 13126-4:2008 Building hardware - Requirements and test methods for windows and doors height windows - Part 4: Espagnolettes
EN 13126-5:2011+A1:2014 Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows
EN 13126-6:2008 Building hardware - Requirements and test methods for windows and doors height windows - Part 6: Variable geometry stay hinges (with or without a friction stay)
EN 13126-7:2007 Building hardware - Requirements and test methods for windows and door height windows - Part 7: Finger catches
EN 13126-8:2006 Building hardware - Requirements and test methods for windows and doors height windows - Part 8: Tilt&Turn, Tilt-First and Turn-Only hardware
EN 13126-9:2013 Building hardware - Requirements and test methods for windows and door height windows - Part 9: Hardware for horizontal and vertical pivot windows
EN 13126-10:2008 Building hardware - Requirements and test methods for windows and doors height windows - Part 10: Arm-balancing systems
EN 13126-11:2008 Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware
EN 13126-12:2008 Building hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung projecting reversible hardware
EN 13126-13:2012 Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 13: Sash balances
EN 13126-14:2012 Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 14: Sash fasteners
EN 13126-15:2008 Building hardware - Requirements and test methods for windows and doors height windows - Part 15: Rollers for horizontal sliding and sliding folding windows and doors
EN 13126-16:2008 Building hardware - Requirements and test methods for windows and doors height windows - Part 16: Hardware for Lift&Slide windows and doors
EN 13126-17:2008 Building hardware - Requirements and test methods for windows and doors height windows - Part 17: Hardware for Tilt&Slide windows and doors
EN 13126-19:2011 Building hardware - Requirements and test methods for windows and door height windows - Part 19: Sliding Closing Devices
EN 13241-1:2003+A1:2011 Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
EN 13330:2013 Shutters - Hard body impact and prevention of access - Test methods
EN 13830:2015 Curtain walling - Product standard
EN 13527:1999 Shutters and blinds - Measurement of operating force - Test methods
EN 13561:2015 External blinds and awnings - Performance requirements including safety
EN 13561:2015/AC:2016 External blinds and awnings - Performance requirements including safety
EN 13637:2015 Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods
EN 13659:2015 Shutters and external venetian blinds - Performance requirements including safety
EN 14019:2004 Curtain Walling - Impact resistance - Performance requirements
EN 14024:2004 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
EN 14201:2004 Blinds and shutters - Resistance to repeated operations (mechanical endurance) - Methods of testing
EN 14202:2004 Blinds and shutters - Suitability for use of tubular and square motorizations - Requirements and test methods
EN 14203:2004 Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods
EN 14351-1:2006+A1:2010 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
EN 14500:2008 Blinds and shutters - Thermal and visual comfort - Test and calculation methods
EN 14501:2005 Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification
EN 14608:2004 Windows - Determination of the resistance to racking
EN 14609:2004 Windows - Determination of the resistance to static torsion
EN 14637:2007 Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance
EN 14648:2007 Building hardware - Fittings for shutters - Requirements and test methods
EN 14759:2005 Shutters - Acoustic insulation relative to airborne sound - Expression of performance
EN 14846:2008 Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods
EN 15684:2012 Building hardware - Mechatronic cylinders - Requirements and test methods
CEN/TR 15894:2009 Building hardware - Door fittings for use by children, elderly and disabled people in domestic and public buildings - A guide for specifiers
EN 16005:2012 Power operated pedestrian doorsets - Safety in use - Requirements and test methods
EN 16005:2012/AC:2015 Power operated pedestrian doorsets - Safety in use - Requirements and test methods
EN 16034:2014 Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
EN 16035:2012 Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows
EN 16361:2013 Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics
EN 16433:2014 Internal blinds - Protection from strangulation hazards - Test methods
EN 16434:2014 Internal blinds - Protection from strangulation hazards - Requirements and test methods for safety devices
EN 16580:2015 Windows and doors - Wetness and splash water proof door leaves - Test and classification
CEN/TR 16676:2014 Energy losses by industrial door
missing:
EN 1026:2016 Windows and doors - Air permeability - Test method
EN 1027:2016 Windows and doors - Water tightness - Test method
EN 1628:2011+A1:2015 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
EN 1629:2011+A1:2015 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading
EN 1630:2011+A1:2015 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts
EN 12209:2016 Building hardware - Mechanically operated locks and locking plates - Requirements and test methods
EN 12210:2016 Windows and doors - Resistance to wind load - Classification
EN 12211:2016 Windows and doors - Resistance to wind load - Test method
EN 12608-1:2016 Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
EN 13561:2015/AC:2016 External blinds and awnings - Performance requirements including safety
[link Point to another website Only the registered members can access]
or
[link Point to another website Only the registered members can access]
Reply With Quote
Bookmarks