CEN Standards Collection 88/370: CEN TC 249-Plastics

[BornToSin]

update:

EN ISO 4892-1:2016 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) - added missing standard thanks to Amjad Malik


now are missing:

EN ISO 294-1:1998/A1:2002 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996/Amd. 1:2001)
EN ISO 1043-1:2011/A1:2016 Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011/Amd 1:2016)
EN ISO 1043-4:1999/A1:2016 Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998/Amd 1:2016)
EN ISO 1264:1997 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract (ISO 1264:1980)
EN ISO 1269:2006 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) (ISO 1269:2006)
EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998)
EN ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
CEN/TR 15353:2007 Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
CEN/TS 15354:2006 Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation
EN ISO 21509:2015 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006)

updated links:

[link Point to another website Only the registered members can access]
or

[link Point to another website Only the registered members can access]

[BornToSin]

update:

EN ISO 1043-1:2011/A1:2016 Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011/Amd 1:2016) - added missing AMD
EN ISO 1043-4:1999/A1:2016 Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998/Amd 1:2016) - added missing AMD
EN ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016) - added missing standard


missing list now is:

EN ISO 294-1:1998/A1:2002 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996/Amd. 1:2001)
EN ISO 1264:1997 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract (ISO 1264:1980)
EN ISO 1269:2006 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) (ISO 1269:2006)
EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998)
EN ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016)
EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
CEN/TR 15353:2007 Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
CEN/TS 15354:2006 Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation
EN ISO 21509:2015 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006)


links:

[link Point to another website Only the registered members can access]
or

[link Point to another website Only the registered members can access]

[BornToSin]

update:

EN ISO 294-1:1998/A1:2002 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996/Amd. 1:2001) - added missing AMD
EN ISO 1264:1997 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract (ISO 1264:1980)- added missing standard
EN ISO 1269:2006 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) (ISO 1269:2006) - added missing standard
EN ISO 21509:2015 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006) - added missing standard


missing list is:

EN ISO 1043-3:2016 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016)
EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998)
EN ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016)
EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
CEN/TR 15353:2007 Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
CEN/TS 15354:2006 Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation
EN ISO 15512:2016 Plastics - Determination of water content (ISO 15512:2016)
EN 15701:2016 Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods


links:

[link Point to another website Only the registered members can access]
or

[link Point to another website Only the registered members can access]

[BornToSin]

update:

EN version:

EN ISO 119:1998 Plastics - Phenol-formaldehyde mouldings - Determination of free phenols - Iodometric method (ISO 119:1977)
EN ISO 120:1998 Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method (ISO 120:1977)
EN ISO 177:1999 Plastics - Determination of migration of plasticizers (ISO 177:1988)
EN ISO 179-2:1999/A1:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test - Amendment 1: Precision data (ISO 179-2:1997/Amd 1:2011)
EN ISO 182-2:1999 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 2: pH method (ISO 182-2:1990)
EN ISO 182-3:2000 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993)
EN ISO 182-3:2000 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993)
EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
EN ISO 294-1:1998 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles* and moulding of multipurpose and bar test specimens (ISO 294-1:1996)
EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004)
EN ISO 308:1997 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994)
EN 438-8:2009 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 8: Classification and specifications for design laminates
EN 438-9:2010+A1:2013 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 9: Classification and specifications for alternative core laminates
EN ISO 483:2005 Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005)
EN ISO 489:1999 Plastics - Determination of refractive index (ISO 489:1999)
EN ISO 585:1999 Plastics - Unplasticized cellulose acetate - Determination of moisture content (ISO 585:1990)
EN ISO 604:2003 Plastics - Determination of compressive properties (ISO 604:2002)
EN ISO 1060-1:1999 Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 1: Designation system and basis for specifications (ISO 1060-1:1998)
EN ISO 1060-2:1999 Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties (ISO 1060-2:1998)
EN ISO 1110:1997 Plastics - Polyamides - Accelerated conditioning of test specimens (ISO 1110:1995)
EN ISO 1163-1:1999 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995)
EN ISO 1163-2:1999 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995)
EN ISO 1598:1999 Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990)
EN ISO 1599:1999 Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO 1599:1990)
EN ISO 1600:1999 Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990)
EN ISO 1622-2:1999 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995)
EN ISO 1624:2001 Plastics - Vinyl choride homopolymer and copolymer resins - Sieve analysis in water (ISO 1624:2001)
EN ISO 1923:1995 Cellular plastics and rubbers - Determination of linear dimensions (ISO 1923:1981)
EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)
EN ISO 2897-2:2003 Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:2003)
EN ISO 2898-1:1999 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2898-1:1996)
EN ISO 3386-1:1997 Polymeric materials* cellular flexible - Determination of stress-strain characteristic in compression - Part 1: Low-density materials (ISO 3386-1:1986)
EN ISO 3451-4:2000 Plastics - Determination of ash - Part 4: Polyamides (ISO 3451-4:1998)
EN ISO 3582:2000 Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame (ISO 3582:2000)
EN ISO 3671:1998 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976)
EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981)
EN ISO 4597-1:2008 Plastics - Hardeners and accelerators for epoxy resins - Part 1: Designation (ISO 4597-1:2005)
EN ISO 4608:1998 Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:1998)
EN ISO 4610:2001 Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:2001)
EN ISO 4612:1999 Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method (ISO 4612:1999)
EN ISO 4651:1995/A1:2008 Cellular rubbers and plastics - Determination of dynamic cushioning performance - Amendment 1 (ISO 4651:1988/Amd 1:2006)
EN ISO 4894-2:1999 Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995)
EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA)* acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000)
EN ISO 7391-1:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:2006)
EN ISO 7822:1999 Textile glass reinforced plastics - Determination of void content - Loss on ignition* mechanical disintegration and statistical counting methods (ISO 7822:1990)
EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
EN ISO 8619:2004 Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate (ISO 8619:2003)
EN ISO 8987:2005 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:2005)
EN ISO 9702:1998 Plastics - Amine epoxide hardeners - Determination of primary* secondary and tertiary amine group nitrogen content (ISO 9702:1996)
EN ISO 9988-1:2006 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 9988-1:2004)
EN ISO 10366-2:2003 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003)
EN ISO 10548:2003 Carbon fibre - Determination of size content (ISO 10548:2002)
EN ISO 10618:2004 Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004)
EN ISO 11248:1999 Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993)
EN ISO 11402:2005 Phenolic* amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004)
EN ISO 11468:1999 Plastics - Preparation of PVC pastes for test purposes - Dissolver method (ISO 11468:1997)
EN ISO 11501:2004 Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995)
EN ISO 11667:1999 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin* reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997)
EN ISO 12058-1:2002 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:1997)
EN ISO 12086-1:2006 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 12086-1:2006)
EN ISO 12086-2:2006 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:2006) + fixed link in excel
EN ISO 14129:1997 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response* including the in-plane shear modulus and strength* by the +/- 45° tension test method (ISO 14129:1997)
EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
EN ISO 28941-1:2008 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 28941-1:2008)


Better quality:

EN 438-1:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information
EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
EN 438-3:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
EN 438-4:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
EN 438-5:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
EN 438-6:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater
EN ISO 844:2014 Rigid cellular plastics - Determination of compression properties (ISO 844:2014)
EN ISO 1043-1:2011/A1:2016 Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011/Amd 1:2016)
EN ISO 3167:2014 Plastics - Multipurpose test specimens (ISO 3167:2014)
EN ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
EN ISO 6383-1:2015 Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method (ISO 6383-1:2015)
EN ISO 11403-1:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2014)
EN ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
EN 12608-1:2016 Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification* requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
EN ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)


changed final draft to correct valid edition:

EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007)

added missing/new standards:

EN ISO 1043-3:2016 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016)
EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998)
EN ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016)
EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
CEN/TR 15353:2007 Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
EN ISO 25137-1:2017 Plastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 25137-1:2009)
EN ISO 25137-2:2017 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)



still missing:

CEN/TS 15354:2006 Plastics - Extruded and/or calendered* non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation
EN ISO 15512:2016 Plastics - Determination of water content (ISO 15512:2016)
EN 15701:2016 Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods


new link:

[link Point to another website Only the registered members can access]

[BornToSin]

update:

added new/missing standards:

EN 13206:2017 Covering thermoplastic films for use in agriculture and horticulture
EN ISO 15512:2016 Plastics - Determination of water content (ISO 15512:2016)
EN 15701:2016 Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods
CEN/ISO TR 17801:2017 Plastics - Standard table for reference global solar spectral irradiance at sea level - Horizontal* relative air mass 1 (ISO/TR 17801:2014)
CEN/ISO TR 18486:2017 Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance (ISO/TR 18486:2016)
EN ISO 29664:2017 Plastics - Artificial weathering including acidic deposition (ISO 29664:2010)


the missing are:

EN ISO 177:2017 Plastics - Determination of migration of plasticizers (ISO 177:2016)
CEN/TS 15354:2006 Plastics - Extruded and/or calendered* non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation
EN ISO 16396-2:2017 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)


new link:

[link Point to another website Only the registered members can access]

[BornToSin]

update:

better quality or EN versions:

EN ISO 172:1998 Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978)
EN ISO 182-4:2000 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993)
EN ISO 294-1:1998/A1:2002 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles* and moulding of multipurpose and bar test specimens (ISO 294-1:1996/Amd. 1:2001)
EN ISO 294-2:1998 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996)
EN ISO 294-2:1998 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996)
EN ISO 294-2:1998/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996)
EN ISO 307:2007/A1:2013 Plastics - Polyamides - Determination of viscosity number - Amendment 1: Corrections* and update to reference to JIS K 6920-2 (ISO 307:2007/Amd 1:2013)
EN 478:1995 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Appearance after exposure at 150 °C - Test method
EN ISO 584:1997 Plastics - Unsaturated polyester resins - Determination of reactivity at 80 °C (conventional method) (ISO 584:1982)
EN ISO 1043-3:2016 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016)
EN ISO 1043-4:1999/A1:2016 Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998/Amd 1:2016)
EN ISO 1061:1999 Plastics - Unplasticized cellulose acetate - Determination of free acidity (ISO 1061:1990)
EN ISO 1158:1998 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998)
EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998)
EN ISO 2078:1994 Textile glass - Yarns - Designation (ISO 2078:1993)
EN ISO 3344:1997 Reinforcement products - Determination of moisture content (ISO 3344:1997)
EN ISO 3386-2:1998 Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997)
EN ISO 3521:1999 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997)
EN ISO 4577:1999 Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method (ISO 4577:1983)
EN ISO 4613-1:1999 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993)
EN ISO 4613-2:1995 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995)
EN ISO 4613-2:1995/A1:2004 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties - Amendment 1 (ISO 4613-2:1995/Amd 1:2004)
EN ISO 4638:1995 Polymeric materials* cellular flexible - Determination of air flow permeability (ISO 4638:1984)
EN ISO 4651:1995 Cellular rubbers and plastics - Determination of dynamic cushioning performance (ISO 4651:1988)
EN ISO 6186:1998 Plastics - Determination of pourability (ISO 6186:1998)
EN ISO 6383-2:2004 Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method (ISO 6383-2:1983)
EN ISO 7327:1997 Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride (ISO 7327:1994)
EN ISO 7765-1:2004 Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods (ISO 7765-1:1988)
EN ISO 7808:1998 Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992)
EN ISO 7823-1:2003 Plastics - Poly(methyl methacrylate) sheets - Types* dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003)
EN ISO 7823-2:2003 Plastics - Poly(methyl methacrylate) sheets - Types* dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003)
EN ISO 8257-2:2006 Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8257-2:2001)
EN ISO 8295:2004 Plastics - Film and sheeting - Determination of the coefficients of friction (ISO 8295:1995)
EN ISO 8975:1995 Plastics - Phenolic resins - Determination of pH (ISO 8975:1989)
EN ISO 8985:1998 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998)
EN ISO 8986-1:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:2009)
EN ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009)
EN ISO 8988:2006 Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method* perchloric acid method and hydrochloric acid method (ISO 8988:2006)
EN ISO 8989:1998 Plastics - Liquid phenolic resins - Determination of water miscibility (ISO 8989:1995)
EN ISO 9054:1999 Cellular plastics* rigid - Test methods for self-skinned* high-density materials (ISO 9054:1990)
EN ISO 9396:2000 Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus (ISO 9396:1997)
EN ISO 9771:1997 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995)
EN ISO 9944:1995 Plastics - Phenolic resins - Determination of electrical conductivity of resin extracts (ISO 9944:1990)
EN ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016)
EN ISO 11357-7:2015 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015)
EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
EN ISO 11833-2:2006 Plastics - Unplasticized poly(vinyl chloride) sheets - Types* dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)
EN ISO 12017:1996 Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods (ISO 12017:1995)
EN ISO 12114:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997)
EN ISO 12115:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability* maturation and shelf life (ISO 12115:1997)
EN 12613:2009 Plastics warning devices for underground cables and pipelines with visual characteristics
EN 12654-1:1998 Textile glass - Yarns - Part 1: Designation
EN 12654-2:1998 Textile glass - Yarns - Part 2: Methods of test and general specifications
EN 12654-3:1998 Textile glass - Yarns - Part 3: General requirements for general applications
EN 12814-3:2014 Testing of welded joints in thermoplastics semi-finished products - Part 3: Tensile creep test
EN 12943:1999 Filler materials for thermoplastics - Scope* designation* requirements* tests
EN 12971-1:1999 Reinforcements - Specification for textile glass chopped strands - Part 1: Designation
EN 12971-2:1999 Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements
EN 12971-3:1999 Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements
EN ISO 13000-1:2005 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2005)
EN ISO 13000-2:2005 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005)
EN 13003-2:1999 Para-aramid fibre filament yarns - Part 2: Methods of test and general specifications
EN 13003-3:1999 Para-aramid fibre filament yarns - Part 3: Technical specifications
EN 13067:2012 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
EN 13100-1:1999 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination
EN 13100-4:2012 Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing
EN 13206:2017 Covering thermoplastic films for use in agriculture and horticulture
EN 13245-2:2008 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
EN 13245-2:2008/AC:2009 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
EN 13417-1:2001 Reinforcement - Specifications for woven fabrics - Part 1: Designation
EN 13417-2:2001 Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements
EN 13417-3:2001 Reinforcement - Specifications for woven fabrics - Part 3: Specific requirements
EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
EN 13473-1:2001 Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation
EN 13473-3:2001 Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3: Specific requirements
EN 13677-1:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation
EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements
EN 13677-3:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements
EN 13706-1:2002 Reinforced plastics composites - Specifications for pultruded profiles - Part 1: Designation
EN 13706-2:2002 Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements
EN 13706-3:2002 Reinforced plastics composites - Specifications for pultruded profiles - Part 3: Specific requirements
EN 14020-3:2002 Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements
EN ISO 14126:1999 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999)
EN ISO 14126:1999/AC:2002 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999/Cor.1:2001)
EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
EN ISO 14526-1:1999 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14526-1:1999)
EN ISO 14526-2:1999 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999)
EN ISO 14526-3:1999 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999)
EN ISO 14527-1:1999 Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14527-1:1999)
EN ISO 14527-2:1999 Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF-MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999)
EN ISO 14527-3:1999 Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14527-3:1999)
EN ISO 14528-1:1999 Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14528-1:1999)
EN ISO 14528-2:1999 Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999)
EN ISO 14528-3:1999 Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14528-3:1999)
EN ISO 14529-1:1999 Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14529-1:1999)
EN ISO 14529-2:1999 Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999)
EN ISO 14529-3:1999 Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14529-3:1999)
EN ISO 14530-1:1999 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14530-1:1999)
EN ISO 14530-2:1999 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999)
EN ISO 14530-3:1999 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14530-3:1999)
EN 14598-1:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation
EN 14598-2:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
EN 14598-3:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
EN ISO 14616:2004 Plastics - Heatshrinkable films of polyethylene* ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress (ISO 14616:1997)
EN ISO 14631:1999 Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:1999)
EN ISO 14663-1:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 14663-1:1999)
EN ISO 14663-2:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999)
EN 14728:2005 Imperfections in thermoplastic welds - Classification
EN ISO 14852:2004 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:1999)
EN 14932:2006 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
EN ISO 15023-2:2006 Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 2: Determination of properties (ISO 15023-2:2003)
EN ISO 15106-1:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method (ISO 15106-1:2003)
EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method (ISO 15106-2:2003)
EN ISO 15106-3:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method (ISO 15106-3:2003)
EN ISO 15252-1:1999 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 1: Designation system and basis for specifications (ISO 15252-1:1999)
EN ISO 15252-2:1999 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999)
EN ISO 15252-3:1999 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 15252-3:1999)
EN ISO 15310:2005 Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999)
CEN/TR 15351:2006 Plastics - Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items
EN 15701:2016 Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods
EN 15702:2008 Cellular Plastics - Cell count procedure for flexible and rigid polyurethane
EN ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015)
EN 16296:2012 Imperfections in thermoplastics welded joints - Quality levels
EN ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
EN ISO 20753:2014 Plastics - Test specimens (ISO 20753:2008)
EN ISO 21627-1:2009 Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine (ISO 21627-1:2009)
EN ISO 21627-2:2009 Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine (ISO 21627-2:2009)
EN ISO 21627-3:2009 Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine (ISO 21627-3:2009)
EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009)
EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
EN ISO 22007-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2008)
CEN ISO/TR 22007-5:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011)
EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014)


the missing list:

EN ISO 177:2017 Plastics - Determination of migration of plasticizers (ISO 177:2016)
EN ISO 16396-2:2017 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
EN ISO 20028-1:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20028-1:2017)
EN ISO 20028-2:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)

[link Point to another website Only the registered members can access]

[BornToSin]

EN ISO 177:2017 Plastics - Determination of migration of plasticizers (ISO 177:2016)

[link Point to another website Only the registered members can access]
EN ISO 16396-2:2017 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)

[link Point to another website Only the registered members can access]
EN ISO 20028-1:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20028-1:2017)

[link Point to another website Only the registered members can access]
EN ISO 20028-2:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)

[link Point to another website Only the registered members can access]

[BornToSin]

full list 28.10.2017:
EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
EN ISO 60:1999 Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:1977)
EN ISO 61:1999 Plastics - Determination of apparent density of moulding material that cannot be poured from a specified funnel (ISO 61:1976)
EN ISO 62:2008 Plastics - Determination of water absorption (ISO 62:2008)
EN ISO 75-1:2013 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013)
EN ISO 75-2:2013 Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
EN ISO 75-3:2004 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates (ISO 75-3:2004)
EN ISO 75-3:2004/AC:2006 Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004)
EN ISO 119:1998 Plastics - Phenol-formaldehyde mouldings - Determination of free phenols - Iodometric method (ISO 119:1977)
EN ISO 120:1998 Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method (ISO 120:1977)
EN ISO 172:1998 Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978)
EN ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
EN ISO 176:2005 Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:2005)
EN ISO 177:2017 Plastics - Determination of migration of plasticizers (ISO 177:2016)
EN ISO 178:2010 Plastics - Determination of flexural properties (ISO 178:2010)
EN ISO 178:2010/A1:2013 Plastics - Determination of flexural properties (ISO 178:2010/Amd 1:2013)
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN ISO 179-2:1999 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997)
EN ISO 179-2:1999/A1:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test - Amendment 1: Precision data (ISO 179-2:1997/Amd 1:2011)
EN ISO 180:2000 Plastics - Determination of Izod impact strength (ISO 180:2000)
EN ISO 180:2000/A1:2006 Plastics - Determination of Izod impact strength (ISO 180:2000)
EN ISO 180:2000/A2:2013 Plastics - Determination of Izod impact strength (ISO 180:2000)
EN ISO 182-2:1999 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 2: pH method (ISO 182-2:1990)
EN ISO 182-3:2000 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993)
EN ISO 182-4:2000 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993)
EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
EN ISO 294-1:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles* and moulding of multipurpose and bar test specimens (ISO 294-1:2017)
EN ISO 294-2:1998 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996)
EN ISO 294-2:1998/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996)
EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2011)
EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004)
EN ISO 305:1999 Plastics - Determination of thermal stability of poly(vinyl chloride)* related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method (ISO 305:1990)
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
EN ISO 307:2007 Plastics - Polyamides - Determination of viscosity number (ISO 307:2007)
EN ISO 307:2007/A1:2013 Plastics - Polyamides - Determination of viscosity number - Amendment 1: Corrections* and update to reference to JIS K 6920-2 (ISO 307:2007/Amd 1:2013)
EN ISO 308:1997 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994)
EN 438-1:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information
EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
EN 438-3:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
EN 438-4:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
EN 438-5:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
EN 438-6:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater
EN 438-7:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
EN 438-8:2009 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 8: Classification and specifications for design laminates
EN 438-9:2010+A1:2013 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 9: Classification and specifications for alternative core laminates
EN ISO 472:2013 Plastics - Vocabulary (ISO 472:2013)
EN 477:1995 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to impact of main profiles by falling mass
EN 478:1995 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Appearance after exposure at 150 °C - Test method
EN 479:1995 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of heat reversion
EN ISO 483:2005 Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005)
EN ISO 489:1999 Plastics - Determination of refractive index (ISO 489:1999)
EN 513:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
EN 514:2000 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T-joints
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN ISO 527-3:1995 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995)
EN ISO 527-3:1995/AC:2002 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995)
EN ISO 527-4:1997 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotopic fibre-reinforced plastic composites (ISO 527-4:1997)
EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009)
EN ISO 584:1997 Plastics - Unsaturated polyester resins - Determination of reactivity at 80 °C (conventional method) (ISO 584:1982)
EN ISO 585:1999 Plastics - Unplasticized cellulose acetate - Determination of moisture content (ISO 585:1990)
EN ISO 604:2003 Plastics - Determination of compressive properties (ISO 604:2002)
EN ISO 844:2014 Rigid cellular plastics - Determination of compression properties (ISO 844:2014)
EN ISO 845:2009 Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006)
EN ISO 846:1997 Plastics - Evaluation of the action of microorganisms (ISO 846:1997)
EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
EN ISO 877-1:2010 Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009)
EN ISO 877-2:2010 Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009)
EN ISO 877-3:2010 Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2009)
EN ISO 899-1:2003 Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2003)
EN ISO 899-1:2003/A1:2015 Plastics - Determination of creep behaviour - Part 1: Tensile creep - Amendment 1 (ISO 899-1:2003/Amd 1:2015)
EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003)
EN ISO 899-2:2003/A1:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015)
EN ISO 1043-1:2011 Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011)
EN ISO 1043-1:2011/A1:2016 Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011/Amd 1:2016)
EN ISO 1043-2:2011 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
EN ISO 1043-3:2016 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016)
EN ISO 1043-4:1999 Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998)
EN ISO 1043-4:1999/A1:2016 Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998/Amd 1:2016)
EN ISO 1060-1:1999 Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 1: Designation system and basis for specifications (ISO 1060-1:1998)
EN ISO 1060-2:1999 Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties (ISO 1060-2:1998)
EN ISO 1061:1999 Plastics - Unplasticized cellulose acetate - Determination of free acidity (ISO 1061:1990)
EN ISO 1110:1997 Plastics - Polyamides - Accelerated conditioning of test specimens (ISO 1110:1995)
EN 1122:2001 Plastics - Determination of cadmium - Wet decomposition method
EN ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
EN ISO 1133-2:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
EN ISO 1158:1998 Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998)
EN ISO 1163-1:1999 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995)
EN ISO 1163-2:1999 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995)
EN ISO 1172:1998 Textile-glass-reinforced plastics - Prepregs* moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
EN ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method* liquid pyknometer method and titration method (ISO 1183-1:2012)
EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004)
EN ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999)
EN ISO 1264:1997 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract (ISO 1264:1980)
EN ISO 1265:2007 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles (ISO 1265:2007)
EN ISO 1269:2006 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) (ISO 1269:2006)
EN ISO 1598:1999 Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990)
EN ISO 1599:1999 Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO 1599:1990)
EN ISO 1600:1999 Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990)
EN ISO 1622-1:2012 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:2012)
EN ISO 1622-2:1999 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995)
EN ISO 1624:2001 Plastics - Vinyl choride homopolymer and copolymer resins - Sieve analysis in water (ISO 1624:2001)
EN ISO 1628-1:2009 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles (ISO 1628-1:2009)
EN ISO 1628-1:2009/A1:2012 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles - Amendment 1 (ISO 1628-1:2009/Amd 1:2012)
EN ISO 1628-2:1998 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:1998)
EN ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2010)
EN ISO 1628-5:2015 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998)
EN ISO 1675:1998 Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985)
EN 1778:1999 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
EN ISO 1798:2008 Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008)
EN 1842:1997 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage
EN ISO 1856:2000 Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2000)
EN ISO 1856:2000/A1:2007 Flexible cellular polymeric materials - Determination of compression set - Amendment 1 (ISO 1856:2000/Amd 1:2007)
EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007)
EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007)
EN ISO 1874-2:2012 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
EN ISO 1889:2009 Reinforcement yarns - Determination of linear density (ISO 1889:2009)
EN ISO 1890:2009 Reinforcement yarns - Determination of twist (ISO 1890:2009)
EN ISO 1923:1995 Cellular plastics and rubbers - Determination of linear dimensions (ISO 1923:1981)
EN ISO 2039-1:2003 Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001)
EN ISO 2039-2:1999 Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987)
EN ISO 2078:1994 Textile glass - Yarns - Designation (ISO 2078:1993)
EN ISO 2078:1994/A1:2015 Textile glass - Yarns - Designation - Amendment 1 (ISO 2078:1993/Amd 1:2015)
EN ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000)
EN ISO 2114:2000/AC:2005 Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000)
EN ISO 2439:2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008)
EN ISO 2440:1999 Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:1997)
EN ISO 2440:1999/A1:2010 Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 1 (ISO 2440:1997/Amd 1:2010)
EN ISO 2440:1999/A2:2014 Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 2 (ISO 2440:1997/AMD 2:2014)
EN ISO 2535:2002 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001)
EN ISO 2554:1998 Plastics - Unsaturated polyester resins - Determination of hydroxyl value (ISO 2554:1997)
EN ISO 2555:1999 Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield Test method (ISO 2555:1989)
EN ISO 2556:2000 Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method (ISO 2556:1974)
EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)
EN ISO 2580-2:2003 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003)
EN ISO 2818:1996 Plastics - Preparation of test specimens by machining (ISO 2818:1994)
EN ISO 2897-2:2003 Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:2003)
EN ISO 2898-1:1999 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2898-1:1996)
EN ISO 2898-2:2008 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008)
EN ISO 3001:1999 Plastics - Epoxy compounds - Determination of epoxy equivalent (ISO 3001:1999)
EN ISO 3146:2000 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000)
EN ISO 3146:2000/AC:2003 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000)
EN ISO 3167:2014 Plastics - Multipurpose test specimens (ISO 3167:2014)
EN ISO 3344:1997 Reinforcement products - Determination of moisture content (ISO 3344:1997)
EN ISO 3385:2014 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding (ISO 3385:2014)
EN ISO 3386-1:1997 Polymeric materials* cellular flexible - Determination of stress-strain characteristic in compression - Part 1: Low-density materials (ISO 3386-1:1986)
EN ISO 3386-1:1997/A1:2010 Polymeric materials* cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials - Amendment 1 (ISO 3386-1:1986/Amd 1:2010)
EN ISO 3386-2:1998 Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997)
EN ISO 3386-2:1998/A1:2010 Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials - Amendment 1 (ISO 3386-2:1997/Amd 1:2010)
EN ISO 3451-1:2008 Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2008)
EN ISO 3451-4:2000 Plastics - Determination of ash - Part 4: Polyamides (ISO 3451-4:1998)
EN ISO 3451-5:2002 Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:2002)
EN ISO 3521:1999 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997)
EN ISO 3582:2000 Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame (ISO 3582:2000)
EN ISO 3582:2000/A1:2007 Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame - Amendment 1 (ISO 3582:2000/Amd 1:2007)
EN ISO 3671:1998 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976)
EN ISO 3672-1:2001 Plastics - Unsaturated-polyester resins (UP-R) - Part 1: Designation system (ISO 3672-1:2000)
EN ISO 3672-2:2001 Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000)
EN ISO 3673-1:1999 Plastics - Epoxy resins - Part 1: Designation (ISO 3673-1:1996)
EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981)
EN ISO 4577:1999 Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method (ISO 4577:1983)
EN ISO 4589-1:2017 Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements (ISO 4589-1:2017)
EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
EN ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:2017)
EN ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
EN ISO 4597-1:2008 Plastics - Hardeners and accelerators for epoxy resins - Part 1: Designation (ISO 4597-1:2005)
EN ISO 4608:1998 Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:1998)
EN ISO 4610:2001 Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:2001)
EN ISO 4611:2010 Plastics - Determination of the effects of exposure to damp heat* water spray and salt mist (ISO 4611:2010)
EN ISO 4612:1999 Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method (ISO 4612:1999)
EN ISO 4613-1:1999 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993)
EN ISO 4613-2:1995 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995)
EN ISO 4613-2:1995/A1:2004 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties - Amendment 1 (ISO 4613-2:1995/Amd 1:2004)
EN ISO 4614:1999 Plastics - Melamine-formaldehyde mouldings - Determination of extractable formaldehyde (ISO 4614:1977)
EN ISO 4615:1999 Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content (ISO 4615:1979)
EN ISO 4638:1995 Polymeric materials* cellular flexible - Determination of air flow permeability (ISO 4638:1984)
EN ISO 4651:1995 Cellular rubbers and plastics - Determination of dynamic cushioning performance (ISO 4651:1988)
EN ISO 4651:1995/A1:2008 Cellular rubbers and plastics - Determination of dynamic cushioning performance - Amendment 1 (ISO 4651:1988/Amd 1:2006)
EN ISO 4892-1:2016 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
EN ISO 4894-2:1999 Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995)
EN ISO 4895:2014 Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)
EN ISO 5659-2:2017 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017)
EN ISO 5999:2013 Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification (ISO 5999:2013)
EN ISO 6186:1998 Plastics - Determination of pourability (ISO 6186:1998)
EN ISO 6383-1:2015 Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method (ISO 6383-1:2015)
EN ISO 6401:2008 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method (ISO 6401:2008)
EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA)* acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
EN ISO 6427:2014 Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:2013)
EN ISO 6383-2:2004 Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method (ISO 6383-2:1983)
EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000)
EN ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000)
EN ISO 6721-1:2011 Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011)
EN ISO 6721-2:2008 Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:2008)
EN ISO 6721-3:1996 Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:1994* including Technical Corrigendum 1: 1995)
EN ISO 7214:2012 Cellular plastics - Polyethylene - Methods of test (ISO 7214:2012)
EN ISO 7231:2010 Polymeric materials* cellular* flexible - Determination of air flow value at constant pressure-drop (ISO 7231:2010)
EN ISO 7327:1997 Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride (ISO 7327:1994)
EN ISO 7391-1:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:2006)
EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
EN ISO 7765-1:2004 Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods (ISO 7765-1:1988)
EN ISO 7792-1:2012 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7792-1:2012)
EN ISO 7792-2:2012 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012)
EN ISO 7808:1998 Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992)
EN ISO 7822:1999 Textile glass reinforced plastics - Determination of void content - Loss on ignition* mechanical disintegration and statistical counting methods (ISO 7822:1990)
EN ISO 7823-1:2003 Plastics - Poly(methyl methacrylate) sheets - Types* dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003)
EN ISO 7823-2:2003 Plastics - Poly(methyl methacrylate) sheets - Types* dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003)
EN ISO 7823-3:2007 Plastics - Poly(methyl methacrylate) sheets - Types* dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007)
EN ISO 8067:2008 Flexible cellular polymeric materials - Determination of tear strength (ISO 8067:2008)
EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
EN ISO 8257-1:2006 Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998)
EN ISO 8257-2:2006 Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8257-2:2001)
EN ISO 8295:2004 Plastics - Film and sheeting - Determination of the coefficients of friction (ISO 8295:1995)
EN ISO 8307:2007 Flexible cellular polymeric materials - Determination of resilience by ball rebound (ISO 8307:2007)
EN ISO 8619:2004 Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate (ISO 8619:2003)
EN ISO 8974:2002 Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography (ISO 8974:2002)
EN ISO 8975:1995 Plastics - Phenolic resins - Determination of pH (ISO 8975:1989)
EN ISO 8985:1998 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998)
EN ISO 8986-1:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:2009)
EN ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009)
EN ISO 8987:2005 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:2005)
EN ISO 8988:2006 Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method* perchloric acid method and hydrochloric acid method (ISO 8988:2006)
EN ISO 8989:1998 Plastics - Liquid phenolic resins - Determination of water miscibility (ISO 8989:1995)
EN ISO 9054:1999 Cellular plastics* rigid - Test methods for self-skinned* high-density materials (ISO 9054:1990)
EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005)
EN ISO 9396:2000 Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus (ISO 9396:1997)
EN ISO 9702:1998 Plastics - Amine epoxide hardeners - Determination of primary* secondary and tertiary amine group nitrogen content (ISO 9702:1996)
EN ISO 9771:1997 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995)
EN ISO 9773:1998 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998)
EN ISO 9773:1998/A1:2003 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens (ISO 9773:1998/Amd 1:2003)
EN ISO 9944:1995 Plastics - Phenolic resins - Determination of electrical conductivity of resin extracts (ISO 9944:1990)
EN ISO 9988-1:2006 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 9988-1:2004)
EN ISO 9988-2:2015 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
EN ISO 10066:1997 Flexible cellular polymeric materials - Determination of creep in compression (ISO 10066:1991)
EN ISO 10082:1999 Plastics - Phenolic resins - Classification and test methods (ISO 10082:1999)
EN ISO 10093:1998 Plastics - Fire tests - Standard ignition sources (ISO 10093:1998)
EN ISO 10350-1:2008 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007)
EN ISO 10350-1:2008/A1:2014 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007/Amd 1:2014)
EN ISO 10350-2:2011 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011)
EN ISO 10352:2010 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:2010)
EN ISO 10366-2:2003 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003)
EN ISO 10548:2003 Carbon fibre - Determination of size content (ISO 10548:2002)
EN ISO 10548:2003/AC:2009 Carbon fibre - Determination of size content (ISO 10548:2002/Cor 1:2008)
EN ISO 10618:2004 Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004)
EN ISO 10724-1:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens (ISO 10724-1:1998)
EN ISO 10724-2:2000 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998)
EN ISO 11248:1999 Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993)
EN ISO 11337:2010 Plastics - Polyamides - Determination of e-caprolactam and w-laurolactam by gas chromatography (ISO 11337:2010)
EN ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016)
EN ISO 11357-2:2014 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013)
EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011)
EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014)
EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times* enthalpy of reaction and degree of conversion (ISO 11357-5:2013)
EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008)
EN ISO 11357-7:2015 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015)
EN ISO 11358-1:2014 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014)
EN ISO 11401:1998 Plastics - Phenolic resins - Separation by liquid chromatography (ISO 11401:1993)
EN ISO 11402:2005 Phenolic* amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004)
EN ISO 11402:2005/AC:2006 Phenolic* amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004)
EN ISO 11403-1:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2014)
EN ISO 11403-2:2012 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012)
EN ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
EN ISO 11409:1998 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993)
EN ISO 11468:1999 Plastics - Preparation of PVC pastes for test purposes - Dissolver method (ISO 11468:1997)
EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
EN ISO 11501:2004 Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995)
EN ISO 11502:2005 Plastics - Film and sheeting - Determination of blocking resistance (ISO 11502:1995)
EN ISO 11542-1:2001 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001)
EN ISO 11542-2:1998 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998)
EN ISO 11542-2:1998/AC:2008 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998/Cor 1:2007)
EN ISO 11667:1999 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin* reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997)
EN ISO 11833-1:2012 Plastics - Unplasticized poly(vinyl chloride) sheets - Types* dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)
EN ISO 11833-2:2006 Plastics - Unplasticized poly(vinyl chloride) sheets - Types* dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)
EN ISO 11963:2012 Plastics - Polycarbonate sheets - Types* dimensions and characteristics (ISO 11963:2012)
EN ISO 12017:1996 Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test methods (ISO 12017:1995)
EN ISO 12058-1:2002 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:1997)
EN ISO 12058-1:2002/AC:2004 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:1997)
EN ISO 12086-1:2006 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 12086-1:2006)
EN ISO 12086-1:2006/AC:2007 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 12086-1:2006/Cor 1:2006)
EN ISO 12086-2:2006 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:2006)
EN ISO 12086-2:2006/AC:2009 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:2006/Cor 1:2006)
EN ISO 12114:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997)
EN ISO 12115:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability* maturation and shelf life (ISO 12115:1997)
EN 12575:1998 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC
EN 12576:1998 Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC* BMC and DMC
EN 12608-1:2016 Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification* requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
EN 12613:2009 Plastics warning devices for underground cables and pipelines with visual characteristics
EN 12654-1:1998 Textile glass - Yarns - Part 1: Designation
EN 12654-2:1998 Textile glass - Yarns - Part 2: Methods of test and general specifications
EN 12654-3:1998 Textile glass - Yarns - Part 3: General requirements for general applications
EN 12814-1:1999 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
EN 12814-1:1999/AC:2003 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
EN 12814-2:2000 Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
EN 12814-3:2014 Testing of welded joints in thermoplastics semi-finished products - Part 3: Tensile creep test

[BornToSin]

EN 12814-4:2001 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test
EN 12814-5:2000 Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination
EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
EN 12814-7:2002 Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens
EN 12814-8:2001 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
EN 12814-8:2001/AC:2003 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
EN 12943:1999 Filler materials for thermoplastics - Scope* designation* requirements* tests
EN 12971-1:1999 Reinforcements - Specification for textile glass chopped strands - Part 1: Designation
EN 12971-2:1999 Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements
EN 12971-3:1999 Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements
EN ISO 13000-1:2005 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2005)
EN ISO 13000-2:2005 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005)
EN ISO 13002:1998 Carbon fibre - Designation system for filament yarns (ISO 13002:1998)
EN 13003-1:1999 Para-aramid fibre filament yarns - Part 1: Designation
EN 13003-2:1999 Para-aramid fibre filament yarns - Part 2: Methods of test and general specifications
EN 13003-3:1999 Para-aramid fibre filament yarns - Part 3: Technical specifications
EN 13067:2012 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
EN 13100-1:2017 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination
EN 13100-2:2004 Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 2: X-ray radiographic testing
EN 13100-3:2004 Non destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing
EN 13100-4:2012 Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing
EN 13206:2017 Covering thermoplastic films for use in agriculture and horticulture
EN 13207:2001 Silage thermoplastic films
EN 13245-1:2010 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
EN 13245-2:2008 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
EN 13245-2:2008/AC:2009 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
EN 13245-3:2010 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
EN 13417-1:2001 Reinforcement - Specifications for woven fabrics - Part 1: Designation
EN 13417-2:2001 Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements
EN 13417-3:2001 Reinforcement - Specifications for woven fabrics - Part 3: Specific requirements
EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
EN ISO 13468-1:1996 Plastics - Determination of total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:1996)
EN ISO 13468-2:2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999)
EN 13473-1:2001 Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation
EN 13473-2:2001 Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements
EN 13473-3:2001 Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3: Specific requirements
EN 13655:2002 Plastics - Mulching thermoplastic films for use in agriculture and horticulture
EN 13677-1:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation
EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements
EN 13677-3:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements
EN 13705:2004 Welding of thermoplastics - Machines and equipment for hot gas welding (including extrusion welding)
EN 13706-1:2002 Reinforced plastics composites - Specifications for pultruded profiles - Part 1: Designation
EN 13706-2:2002 Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements
EN 13706-3:2002 Reinforced plastics composites - Specifications for pultruded profiles - Part 3: Specific requirements
EN ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy* Izod and tensile impact-testing (ISO 13802:2015)
EN ISO 13894-1:2015 High-pressure decorative laminates - Composite elements - Part 1: Test methods (ISO 13894-1:2000)
EN ISO 13894-2:2015 High-pressure decorative laminates - Composite elements - Part 2 : Specifications for composite elements with wood-based substrates for interior use (ISO 13894-2:2005)
EN ISO 13927:2015 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015)
EN 14118-1:2003 Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation
EN 14118-2:2003 Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements
EN 14118-3:2003 Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements
EN 14020-1:2002 Reinforcements - Specification for textile glass rovings - Part 1: Designation
EN 14020-2:2002 Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements
EN 14020-3:2002 Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements
EN ISO 14125:1998 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998)
EN ISO 14125:1998/AC:2002 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998/Cor.1:2001)
EN ISO 14125:1998/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties - Amendment 1 (ISO 14125:1998/Amd 1:2011)
EN ISO 14126:1999 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999)
EN ISO 14126:1999/AC:2002 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999/Cor.1:2001)
EN ISO 14129:1997 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response* including the in-plane shear modulus and strength* by the +/- 45° tension test method (ISO 14129:1997)
EN ISO 14130:1997 Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method (ISO 14130:1997)
EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
EN ISO 14526-1:1999 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14526-1:1999)
EN ISO 14526-2:1999 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999)
EN ISO 14526-3:1999 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999)
EN ISO 14527-1:1999 Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14527-1:1999)
EN ISO 14527-2:1999 Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF-MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999)
EN ISO 14527-3:1999 Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14527-3:1999)
EN ISO 14528-1:1999 Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14528-1:1999)
EN ISO 14528-2:1999 Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999)
EN ISO 14528-3:1999 Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14528-3:1999)
EN ISO 14529-1:1999 Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14529-1:1999)
EN ISO 14529-2:1999 Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999)
EN ISO 14529-3:1999 Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14529-3:1999)
EN ISO 14530-1:1999 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14530-1:1999)
EN ISO 14530-2:1999 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999)
EN ISO 14530-3:1999 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14530-3:1999)
EN 14598-1:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation
EN 14598-2:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
EN 14598-2:2005/AC:2006 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
EN 14598-3:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
EN ISO 14616:2004 Plastics - Heatshrinkable films of polyethylene* ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress (ISO 14616:1997)
EN ISO 14631:1999 Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:1999)
EN ISO 14632:1998 Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:1998)
EN ISO 14663-1:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 14663-1:1999)
EN ISO 14663-2:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999)
EN 14728:2005 Imperfections in thermoplastic welds - Classification
EN ISO 14851:2004 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer (ISO 14851:1999)
EN ISO 14852:2004 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide (ISO 14852:1999)
EN ISO 14855-1:2012 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method (ISO 14855-1:2012)
EN ISO 14855-2:2009 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test (ISO 1
EN ISO 14896:2009 Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2009)
EN ISO 14910-1:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification (ISO 14910-1:2013)
EN ISO 14910-2:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013)
EN 14932:2006 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
EN 14987:2006 Plastics - Evaluation of disposability in waste water treatment plants - Test scheme for final acceptance and specifications
EN 14995:2006 Plastics - Evaluation of compostability - Test scheme and specifications
EN ISO 15013:2007 Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007)
EN ISO 15015:2011 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS* AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)
EN ISO 15023-1:2017 Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system and basis for specifications (ISO 15023-1:2017)
EN ISO 15023-2:2006 Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 2: Determination of properties (ISO 15023-2:2003)
EN ISO 15103-2:2007 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007)
EN ISO 15106-1:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method (ISO 15106-1:2003)
EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method (ISO 15106-2:2003)
EN ISO 15106-3:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method (ISO 15106-3:2003)
EN ISO 15252-1:1999 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 1: Designation system and basis for specifications (ISO 15252-1:1999)
EN ISO 15252-2:1999 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999)
EN ISO 15252-3:1999 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 15252-3:1999)
EN ISO 15310:2005 Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999)
EN 15342:2007 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
EN 15343:2007 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
EN 15344:2007 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
EN 15345:2007 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
EN 15346:2014 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
EN 15347:2007 Plastics - Recycled Plastics - Characterisation of plastics wastes
EN 15348:2014 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates
CEN/TR 15351:2006 Plastics - Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items
CEN/TR 15353:2007 Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
CEN/TS 15354:2006 Plastics - Extruded and/or calendered* non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation
EN ISO 15512:2016 Plastics - Determination of water content (ISO 15512:2016)
EN ISO 15527:2013 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW* PE-HD) - Requirements and test methods (ISO 15527:2010)
EN 15534-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
CEN/TS 15534-2:2007 Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials
EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
EN 15534-6:2015 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
EN 15534-6:2015 + A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
EN 15701:2016 Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods
EN 15702:2008 Cellular Plastics - Cell count procedure for flexible and rigid polyurethane
EN ISO 15791-1:2013 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
CEN/TR 15822:2009 Plastics - Biodegradable plastics in or on soil - Recovery* disposal and related environmental issues
EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0*75 mm
EN 15836-2:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1*5 mm
EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
CEN/TR 15932:2010 Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics
CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
EN ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015)
CEN/TS 16137:2011 Plastics - Determination of bio-based carbon content
EN 16245-1:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
EN 16245-2:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin* curing systems* additives and modifiers
EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
EN 16245-4:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials
CEN/TS 16295:2012 Plastics - Declaration of the bio-based carbon content
EN 16296:2012 Imperfections in thermoplastics welded joints - Quality levels
EN ISO 16396-1:2015 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system* marking of products and basis for specifications (ISO 16396-1:2015)
EN ISO 16396-2:2017 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
CEN/TS 16398:2012 Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet
EN 16465:2015 Plastics - Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering
EN 16472:2014 Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps
EN 16795:2015 Plastics - Method for estimating heat build up of flat surfaces by simulated solar radiation
CEN/TS 16861:2015 Plastics - Recycled plastics - Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET)
CEN/TR 16862:2015 Plastics welding supervisor - Task* responsibilities* knowledge* skills and competence
CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
EN ISO 17556:2012 Plastics - Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO 17556:2012)
CEN/ISO TR 17801:2017 Plastics - Standard table for reference global solar spectral irradiance at sea level - Horizontal* relative air mass 1 (ISO/TR 17801:2014)
EN ISO 17855-1:2014 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 17855-1:2014)
EN ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
EN ISO 18064:2014 Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2014)
CEN/ISO TR 18486:2017 Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance (ISO/TR 18486:2016)
EN ISO 19062-1:2015 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19062-1:2015)
EN ISO 19063-1:2015 Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19063-1:2015)
EN ISO 19064-1:2015 Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19064-1:2015)
EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA)* acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 19066-1:2014 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19066-1:2014)
EN ISO 19069-1:2015 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 19069-1:2015)
EN ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications (ISO 19712-1:2008)
EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
EN ISO 20028-1:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20028-1:2017)
EN ISO 20028-2:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)
EN ISO 20200:2015 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test (ISO 20200:2015)
EN ISO 20568-1:2017 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20568-1:2017)
EN ISO 20568-2:2017 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017)
EN ISO 20753:2014 Plastics - Test specimens (ISO 20753:2008)
EN ISO 21509:2015 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006)
EN ISO 21627-1:2009 Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine (ISO 21627-1:2009)
EN ISO 21627-2:2009 Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine (ISO 21627-2:2009)
EN ISO 21627-3:2009 Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine (ISO 21627-3:2009)
EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009)
EN ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2015)
EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
EN ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017)
CEN ISO/TR 22007-5:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011)
EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014)
EN ISO 22088-1:2006 Plastics - Determination of resistance to environmental stress *****ing (ESC) - Part 1: General guidance (ISO 22088-1:2006)
EN ISO 22088-2:2006 Plastics - Determination of resistance to environmental stress *****ing (ESC) - Part 2: Constant tensile load method (ISO 22088-2:2006)
EN ISO 22088-3:2006 Plastics - Determination of resistance to environmental stress *****ing (ESC) - Part 3: Bent strip method (ISO 22088-3:2006)
EN ISO 22088-4:2006 Plastics - Determination of resistance to environmental stress *****ing (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006)
EN ISO 22088-5:2009 Plastics - Determination of resistance to environmental stress *****ing (ESC) - Part 5: Constant tensile deformation method (ISO 22088-5:2006)
EN ISO 22088-6:2009 Plastics - Determination of resistance to environmental stress *****ing (ESC) - Part 6: Slow strain rate method (ISO 22088-6:2006)
EN ISO 25137-1:2017 Plastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 25137-1:2009)
EN ISO 25137-2:2017 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
EN ISO 28941-1:2008 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 28941-1:2008)
EN ISO 29664:2017 Plastics - Artificial weathering including acidic deposition (ISO 29664:2010)


the missing:

CEN/TS 15354:2006 Plastics - Extruded and/or calendered* non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation
EN 15534-6:2015 + A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements

[link Point to another website Only the registered members can access]

[windrider87]

Thanks a lot. You saved the day.