<

Results 1 to 5 of 5

Thread: CEN Standards Collection 332/370: CEN TC 172-Pulp*Paper & Board

  1. #1

    CEN Standards Collection 332/370: CEN TC 172-Pulp*Paper & Board

    full list:
    EN ISO 186:2002 Paper and board - Sampling to determine average quality (ISO 186:2002)
    EN ISO 216:2007 Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction (ISO 216:2007)
    EN ISO 217:2013 Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction (ISO 217:2013)
    EN ISO 287:2009 Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2009)
    EN ISO 534:2011 Paper and board - Determination of thickness, density and specific volume (ISO 534:2011)
    EN ISO 535:2014 Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014)
    EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012)
    EN ISO 638:2008 Paper, board and pulps - Determination of dry matter content - Oven-drying method (ISO 638:2008)
    EN 643:2014 Paper and board - European list of standard grades of paper and board for recycling
    EN 645:1993 Paper and board intended to come into contact with foodstuffs - Preparation of a cold water extract
    EN 646:2006 Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board
    EN 647:1993 Paper and board intended to come into contact with foodstuffs - Preparation of a hot water extract
    EN 648:2006 Paper and board intended to come into contact with foodstuffs - Determination of the fastness of fluorescent whitened paper and board
    EN ISO 801-1:1996 Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form (ISO 8001-1:1994)
    EN ISO 801-3:1996 Pulps - Determination of saleable mass in lots - Part 3: Unitized bales (ISO 801-3:1994)
    EN 920:2000 Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract
    EN 1104:2005 Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobial constituents
    EN 1230-1:2009 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 1: Odour
    EN 1230-2:2009 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint)
    EN 1541:2001 Paper and board intended to come into contact with foodstuffs - Determination of formaldehyde in an aqueous extract
    EN ISO 1924-2:2008 Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min) (ISO 1924-2:2008)
    EN ISO 1974:2012 Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012)
    EN ISO 2758:2014 Paper - Determination of bursting strength (ISO 2758:2014)
    EN ISO 2759:2014 Board - Determination of bursting strength (ISO 2759:2014)
    EN ISO 3035:2011 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
    EN ISO 3037:2013 Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013)
    EN ISO 4119:1996 Pulps - Determination of stock concentration (ISO 4119:1995)
    EN ISO 5263-1:2004 Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps (ISO 5263-1:2004)
    EN ISO 5263-2:2004 Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 degrees C (ISO 5263-2:2004)
    EN ISO 5263-3:2004 Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at > 85 degrees C (ISO 5263-3:2004)
    EN ISO 5264-2:2011 Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:2011)
    EN ISO 5267-1:2000 Pulps - Determination of drainability - Part 1: Schopper-Riegler method (ISO 5267-1:1999)
    EN ISO 5267-1:2000/AC:2002 Pulps - Determination of drainability - Part 1: Schopper-Riegler method (ISO 5267-1:1999/Cor.1:2001)
    EN ISO 5269-1:2005 Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method (ISO 5269-1:2005)
    EN ISO 5269-2:2004 Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-K&#246;then method (ISO 5269-2:2004)
    EN ISO 5270:2012 Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012)
    EN ISO 5350-1:2006 Pulps - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets by transmitted light (ISO 5350-1:2006)
    EN ISO 5350-2:2006 Pulps - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp by transmitted light (ISO 5350-2:2006)
    EN ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011)
    EN ISO 8254-1:2009 Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method (ISO 8254-1:2009)
    EN ISO 8254-2:2003 Paper and board - Measurement of specular gloss - Part 2: 75° gloss with a parallel beam, DIN method (ISO 8254-2:2003)
    EN ISO 9706:1998 Information and documentation - Paper for documents - Requirements for permanence (ISO 9706:1994)
    EN 12281:2002 Printing and business paper - Requirements for copy paper for dry toner imaging processes
    EN 12283:2002 Printing and business paper - Determination of toner adhesion
    EN 12497:2005 Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of mercury in an aqueous extract
    EN 12498:2005 Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of cadmium and lead in an aqueous extract
    EN ISO 12625-1:2011 Tissue paper and tissue products - Part 1: General guidance on terms (ISO 12625-1:2011)
    EN ISO 12625-3:2014 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014)
    EN ISO 12625-4:2005 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at break and tensile energy absorption (ISO 12625-4:2005)
    EN ISO 12625-5:2005 Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2005)
    EN ISO 12625-6:2005 Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2005)
    EN ISO 12625-7:2014 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014)
    EN ISO 12625-8:2010 Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010)
    EN ISO 12625-9:2015 Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015)
    EN ISO 12625-11:2012 Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2012)
    EN ISO 12625-12:2010 Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010)
    EN ISO 12625-15:2015 Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015)
    EN ISO 12625-16:2015 Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015)
    EN 12858:1999 Paper - Printing and business paper - Requirements for continuous stationery
    EN 13676:2001 Polymer coated paper and board intended for food contact - Detection of pinholes
    EN 14086:2003 Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method
    EN 14338:2003 Paper and board intended to come into contact with foodstuffs - Conditions for determination of migration from paper and board using modified polyphenylene oxide (MPPO) as a simulant
    EN ISO 14453:2014 Pulps - Determination of acetone-soluble matter (ISO 14453:2014)
    EN 14719:2005 Pulp, paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction
    EN ISO 15318:1999 Pulp, paper and board - Determination of 7 specified polychlorinated biphenyls (PCB) (ISO 15318:1999)
    EN ISO 15320:2011 Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011)
    EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
    CEN/TR 15645-1:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the odour test - Part 1: Odour
    CEN/TR 15645-2:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off flavour test - Part 2: Fatty food
    CEN/TR 15645-2:2008/AC:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 2: Fatty food
    CEN/TR 15645-3:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 3: Dry food
    CEN/TR 15645-3:2008/AC:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 3: Dry food
    EN ISO 15755:1999 Paper and board - Estimation of contraries (ISO 15755:1999)
    EN 15845:2010 Paper and board - Determination of the cytotoxicity of aqueous extracts
    EN 16418:2014 Paper and board - Determination of the cytotoxicity of aqueous extracts using a metabolically competent hepatoma cell line (HepG2)
    EN 16453:2014 Pulp, paper and paperboard - Determination of phthalates in extracts from paper and paperboard
    EN 20187:1993 Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990)
    EN 27213:1993 Pulps - Sampling for testing (ISO 7213:1981)


    missing:
    CEN/TR 15645-1:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the odour test - Part 1: Odour
    CEN/TR 15645-2:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off flavour test - Part 2: Fatty food
    CEN/TR 15645-3:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 3: Dry food
    EN 16418:2014 Paper and board - Determination of the cytotoxicity of aqueous extracts using a metabolically competent hepatoma cell line (HepG2)


    links:

    [link Point to another website Only the registered members can access]
    or

    [link Point to another website Only the registered members can access]


  2. # ADS
    Spons Circuit
    Join Date
    Always
    Posts
    Many
     
  3. #2

    Re: CEN Standards Collection 332/340: CEN TC 172-Pulp,Paper & Board

    update:

    EN 16418:2014 Paper and board - Determination of the cytotoxicity of aqueous extracts using a metabolically competent hepatoma cell line (HepG2) - addded missing standard

    new missing list:

    EN ISO 8254-2:2016 Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016)
    CEN/TR 15645-1:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the odour test - Part 1: Odour
    CEN/TR 15645-2:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off flavour test - Part 2: Fatty food
    CEN/TR 15645-3:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 3: Dry food


    new links:

    [link Point to another website Only the registered members can access]
    or

    [link Point to another website Only the registered members can access]


  4.    Sponsored Links



    -

  5. #3

    Re: CEN Standards Collection 332/350: CEN TC 172-Pulp,Paper & Board

    update:

    EN ISO 8254-2:2016 Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016) - added missing standard

    still missing:

    CEN/TR 15645-1:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the odour test - Part 1: Odour
    CEN/TR 15645-2:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off flavour test - Part 2: Fatty food
    CEN/TR 15645-3:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 3: Dry food

    new links:

    [link Point to another website Only the registered members can access]
    or

    [link Point to another website Only the registered members can access]


  6. #4

    Re: CEN Standards Collection 332/370: CEN TC 172-Pulp*Paper & Board

    update:

    EN versions of:

    EN ISO 186:2002 Paper and board - Sampling to determine average quality (ISO 186:2002)
    EN ISO 216:2007 Writing paper and certain classes of printed matter - Trimmed sizes - A and B series* and indication of machine direction (ISO 216:2007)
    EN ISO 287:2009 Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2009)
    EN ISO 3035:2011 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
    EN ISO 4119:1996 Pulps - Determination of stock concentration (ISO 4119:1995)
    EN ISO 5263-1:2004 Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps (ISO 5263-1:2004)
    EN ISO 5263-2:2004 Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 degrees C (ISO 5263-2:2004)
    EN ISO 5263-3:2004 Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at > 85 degrees C (ISO 5263-3:2004)
    EN ISO 5264-2:2011 Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:2011)
    EN ISO 5267-1:2000 Pulps - Determination of drainability - Part 1: Schopper-Riegler method (ISO 5267-1:1999)
    EN ISO 5269-1:2005 Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method (ISO 5269-1:2005)
    EN ISO 5269-2:2004 Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-K&#246;then method (ISO 5269-2:2004)
    EN ISO 5350-1:2006 Pulps - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets by transmitted light (ISO 5350-1:2006)
    EN ISO 5350-2:2006 Pulps - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp by transmitted light (ISO 5350-2:2006)
    EN 16453:2014 Pulp* paper and paperboard - Determination of phthalates in extracts from paper and paperboard


    better quality:

    EN ISO 2758:2014 Paper - Determination of bursting strength (ISO 2758:2014)
    EN ISO 2759:2014 Board - Determination of bursting strength (ISO 2759:2014)
    EN ISO 8254-2:2016 Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam* DIN method (ISO 8254-2:2016)

    new missing list:

    EN ISO 12625-4:2016 Tissue paper and tissue products - Part 4: Determination of tensile strength* stretch at maximum force and tensile energy absorption (ISO 12625-4:2016)
    EN ISO 12625-5:2016 Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016)
    EN ISO 12625-6:2016 Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016)
    CEN/TR 15645-1:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the odour test - Part 1: Odour
    CEN/TR 15645-2:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off flavour test - Part 2: Fatty food
    CEN/TR 15645-3:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 3: Dry food


    new link:

    [link Point to another website Only the registered members can access]


  7. #5

    Re: CEN Standards Collection 332/370: CEN TC 172-Pulp*Paper & Board

    update:

    EN or missing

    EN 643:2014 Paper and board - European list of standard grades of paper and board for recycling
    EN ISO 801-3:1996 Pulps - Determination of saleable mass in lots - Part 3: Unitized bales (ISO 801-3:1994)
    EN 1230-2:2009 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint)
    EN ISO 9706:1998 Information and documentation - Paper for documents - Requirements for permanence (ISO 9706:1994)
    EN 12281:2002 Printing and business paper - Requirements for copy paper for dry toner imaging processes
    EN 12283:2002 Printing and business paper - Determination of toner adhesion
    EN ISO 12625-4:2016 Tissue paper and tissue products - Part 4: Determination of tensile strength* stretch at maximum force and tensile energy absorption (ISO 12625-4:2016)
    EN ISO 12625-5:2016 Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016)
    EN ISO 12625-6:2016 Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016)
    EN 13676:2001 Polymer coated paper and board intended for food contact - Detection of pinholes
    EN 12858:1999 Paper - Printing and business paper - Requirements for continuous stationery
    EN 14719:2005 Pulp* paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction
    EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
    EN ISO 15755:1999 Paper and board - Estimation of contraries (ISO 15755:1999)
    EN 20187:1993 Paper* board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990)
    EN 27213:1993 Pulps - Sampling for testing (ISO 7213:1981)


    the missing are:

    CEN/TR 15645-1:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the odour test - Part 1: Odour
    CEN/TR 15645-2:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off flavour test - Part 2: Fatty food
    CEN/TR 15645-3:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 3: Dry food

    [link Point to another website Only the registered members can access]


  8.    Spons.


  •   

Similar Threads

  1. Replies: 2
    Last Post: 07-29-2017, 03:33 AM
  2. Replies: 4
    Last Post: 07-12-2017, 12:26 AM
  3. Replies: 0
    Last Post: 12-31-2016, 04:12 AM
  4. CEN Standards Collection 359/360: CEN WS eBES-e-Business Board...
    By BornToSin in forum Mechanical Engineering
    Replies: 0
    Last Post: 12-25-2016, 05:56 AM
  5. Replies: 0
    Last Post: 10-29-2016, 01:58 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •