Thermal design for air cooler heat exchanger

[R_RAZI]

Thank you , is possible other vol.'s also uploaded please ?

[asjp2201@yahoo.com]

excellent bro... awaiting from long time for this book

[caca]

Dear All,

Do anyone have Cook, E. M., “Air Cooled Heat Exchangers,” Chemical Engineer-
ing, May 25, 1964 book, please share

[caca]

Dear All,

Do anyone have Cook, E. M., “Air Cooled Heat Exchangers,” Chemical Engineer-
ing, May 25, 1964 book, please share

[khalid655]

Dear caca,
follow these books these are good reference.

[caca]

Dear caca,
follow these books these are good reference.

Dear Kalid655,
how to calculate number and size of nozzle for air cooler heat exchangers, since there is no discussion in the book
Thanks

[khalid655]

Dear CACA,
Number of nozzles depends upon the V max i.e. maximum velocity (for gas case calculated as 0.2 * 0.296 * (Nozzle inlet pressure in Pa/density in kg/m³)^0.5 m/sec) if velocity is higher than this inside the nozzle more nozzles will be added.
Size depends upon the pressure drop criteria the nozzle pressur drop is limited to 10 % of the allowable pressure drop.

hope clarified

[caca]

Dear Kalid655,

Could you please inform me where can i find that information (book)

[caca]

Dear Kalid655,

Could you please inform me where can i find that information (book)

[Lim Sjahrial]

Dear Caca,
For designing header Box of Air cooled heat exchanger, please see ASME VIII div.1 Appendix 13. There is a rule & how to the design of header Box.

Regards
Lim Sjahrial

[caca]

Dear Caca,
For designing header Box of Air cooled heat exchanger, please see ASME VIII div.1 Appendix 13. There is a rule & how to the design of header Box.

Regards
Lim Sjahrial

Dear Lim Sjahrial,
Thanks for your advice
ASME only discussion about mechanical design, I need thermal design

[caca]

Dear Caca,
For designing header Box of Air cooled heat exchanger, please see ASME VIII div.1 Appendix 13. There is a rule & how to the design of header Box.

Regards
Lim Sjahrial

Dear Lim Sjahrial,
Thanks for your advice
ASME only discussion about mechanical design, I need thermal design