ETAP v11.0

[smzakaullah]

1. Install Etap and Lic manager
2. Stopped Lic manager in services
3. Coppied "EtapsImt.exe" and "otisvrmsgs.dll" from ETAPSETUP/LM64SETUP/SYSTEM32/DRIVERS to \Program Files\Operation Technology Inc.
4. Configured ECP Printer Port:
a. Never use a interrupt
b. Checked Enable Legacy Plug and Play detection
c. Resources: I/O Range 03BC-03BF and I/O 07BC-07BE
5. Restarted Lic manager in services
6. When running ETAP the following happens:
a. The ETAP License Path Selection pops up with the computer
name checked
b. If i click ok it says ETAP key search gives me the following message:
"License Manger Server: Computer name"
ETAP key is not found or the license manager is not ready!


This is what i did exactly also but it does not work. Can someone kindly tell me where am i going wrong.

You have done a small mistake. You need first of all configure the ECP printer port and after then install ETAP.

[bdikic]

Can you explain about configure the ECP printer port?
Thanx in advance!

[mabdelslam]

Dear all
I already installed Etap 12 & 12.5 both with the same sequenca as Etap11, with the same files but i still need the serial no. if any one have the seial No. send it to me mo.abdelslam@gmail.com
Thank you all

[Joule]

Hi college Telemaco
Please send me the m-e-d-i-c-i-n-e of Cyme 7 rev 5

[telemacofinal]

Hi college Telemaco
Please send me the m-e-d-i-c-i-n-e of Cyme 7 rev 5

I not have the m - e - d - i - c -i - n - e of cyme 7 rev 5. Only installer

[newbiedn]

1. Install Etap 11 and Etaps Lic Manager.
2. Open Control Panel -> Administative tools -> Services, stop Etaps Lic Mgr
service.
3. Copy *.dll and *.exe files to the \Program Files\Operation Technology Inc\
Etap License Manager 1100\
4. Start "Etaps Lic Mngr" service again.
5. Try to start etaps 11, if anything is okey it will ask you activation code.
(stop your firewall or add this service to trusted zone)
6. Enter new activation code: Z@8cUuS5w#nytVgCfvvccA%tDDu4jD6aNb?K
7. Enjoy.

Thank so much for great guide

[manuel_cv]

Can you explain about configure the ECP printer port?
Thanx in advance!

Check older pages my friend.

For Windows XP:

You add the ECP printer port from Control Panel, Add Hardware. In XP you click on Yes, i connect the hardware. Then select Add a new hardware disp, at the bottom of the list. Click on Install the hardware in manual... Then select Ports (COM & LPT), and there is the infamous ECP printer port. Finally just follow fx007 intrucctions. Hope it help.

mohad explained the process for Win 7:

The procedure to add printer port for win7 (even laptop) is easy:
control panel --> device manager --> select ports (com & lpt) --> in menu bar press Action --> Add legacy hardware
--> follow instructions

[ardes]

Check older pages my friend.

For Windows XP:

You add the ECP printer port from Control Panel, Add Hardware. In XP you click on Yes, i connect the hardware. Then select Add a new hardware disp, at the bottom of the list. Click on Install the hardware in manual... Then select Ports (COM & LPT), and there is the infamous ECP printer port. Finally just follow fx007 intrucctions. Hope it help.

mohad explained the process for Win 7:

The procedure to add printer port for win7 (even laptop) is easy:
control panel --> device manager --> select ports (com & lpt) --> in menu bar press Action --> Add legacy hardware
--> follow instructions

I've followed the instruction but still get the message "ETAP key not found or License Manager is not ready!". I use win 8 64bit.
Please send me the instruction-assistance to frans.parade@gmail.com
Thanks

[abekas]

Dear friend telemacofinal, your repidshare link to cyme 7 doesn't seem to work (at least for me). I'm transfered to a blue screen with no download links. What am I doing wrong ?

[nitinpe]

Hi,

can you please provide the link to download etap 11.

Thanks in advance,

nitin

[nitinpe]

Hi,

can you please provide the link to download etap 11.

Thanks in advance,

nitin

[mackernel]

thankyou friends

God bless you!!