ETAP v11.0

[juan.de.vg]

Dear Brothers. Please correct where am wrong.
Can you please tell me which windows you are using. Am using Dell Latitude E5510 with Windows XP service pack 3. My ECP Printer Port (LPT1) settings are

Port Settings
Never use an Interrupt
Enable legacy Plug & Play detection (arrow)
LPT Port Number= LPT1

Details
Device Instance Id
ACPI\PNP0401\5

Resources
I/O Range 03BC-03BF
Setting based on current configurations

I cannot change any setting here in Resources. In Bios I had change Parallel port to ECP mode. still after sucessful installation my Laptop hangs on starting ETAP 11.

Please help brother.
Regards
Raj

I've got it working in a win 7 ultimate 64 bits laptop, IT WORKS!!!

THANK YOU VERY MUCH fx007 and raj151857, we can't put in words our gratitude.

To get it work you have to install it following the instructions on page 15, I reproduce below:

1. Install Etap 11 and Etaps Lic Manager.
2. Open Control Panel -> Administative tools -> Services, stop Etaps Lic Mgr
service.
3. Copy *.dll and *.exe files to the \Program Files\Operation Technology Inc\
Etap License Manager 1100\
4. Start "Etaps Lic Mngr" service again.
5. Try to start etaps 11, if anything is okey it will ask you activation code.
(stop your firewall or add this service to trusted zone)
6. Enter new activation code: Z@8cUuS5w#nytVgCfvvccA%tDDu4jD6aNb?K
7. Enjoy.

Once you have installed it, if you haven't configured a new LPT1 port as described by raj151857 above, you have to do it,
and then when you starts the program it will ask you for the activation code reproduce above in step 6.

For installation you need the first .rar posted on page 14, reuploaded in a post you can see on the bottom of that page by tak2750

[link Point to another website Only the registered members can access]
You have to copy the 2 archives in the .rar in the installation directory as explained on step 3. in above instructions.


THANK YOU VERY MUCH fx007 and raj151857. GREAT JOB AND GREAT CONTRIBUTION TO THE ENGINEERING COMMUNITY.

[popy]

posted on page 14, reuploaded in a post you can see on the bottom of that page by tak2750

[link Point to another website Only the registered members can access]
You have to copy the 2 archives in the .rar in the installation directory as explained on step 3. in above instructions.

Hi,
when I download this file i don't have the DLL inside but one .EXE and a script????
Where i can found the DLL?

Regards
Popy

[Sokoloff]

3. Copy *.dll and *.exe files to the \Program Files\Operation Technology Inc\
Etap License Manager 1100\

[link Point to another website Only the registered members can access]
You have to copy the 2 archives in the .rar in the installation directory as explained on step 3. in above instructions.

Hello!
Can not download, please re-download this file or send it to sokolow1979@yandex.ru
Thanks in advance

[Sokoloff]

Comrades, please share the contents of the archive. Is it so hard.
Do not know, i somehow do not let the site

[link Point to another website Only the registered members can access]

[DinhLM]

I've got it working in a win 7 ultimate 64 bits laptop, IT WORKS!!!

THANK YOU VERY MUCH fx007 and raj151857, we can't put in words our gratitude.

To get it work you have to install it following the instructions on page 15, I reproduce below:

1. Install Etap 11 and Etaps Lic Manager.
2. Open Control Panel -> Administative tools -> Services, stop Etaps Lic Mgr
service.
3. Copy *.dll and *.exe files to the \Program Files\Operation Technology Inc\
Etap License Manager 1100\
4. Start "Etaps Lic Mngr" service again.
5. Try to start etaps 11, if anything is okey it will ask you activation code.
(stop your firewall or add this service to trusted zone)
6. Enter new activation code: Z@8cUuS5w#nytVgCfvvccA%tDDu4jD6aNb?K
7. Enjoy.

Once you have installed it, if you haven't configured a new LPT1 port as described by raj151857 above, you have to do it,
and then when you starts the program it will ask you for the activation code reproduce above in step 6.

For installation you need the first .rar posted on page 14, reuploaded in a post you can see on the bottom of that page by tak2750

[link Point to another website Only the registered members can access]
You have to copy the 2 archives in the .rar in the installation directory as explained on step 3. in above instructions.


THANK YOU VERY MUCH fx007 and raj151857. GREAT JOB AND GREAT CONTRIBUTION TO THE ENGINEERING COMMUNITY.

Dear juan.de.vg !

Please help me !

I don't know where are 2 file in step 3 above: Copy *.dll and *.exe files
if possible please upload those files or send to me via email: dinhbka51@gmail.com
thank you a lot!