API TR 943-C and API RP 934-A

[cpchonburi]

Need these code, Thanks for share sir.

[Achmad Nur Eddin]

Materials and Fabrication Requirements for 2-1/4/3Cr , 2 1/4Cr-1Mo-1/4V , 3Cr-1Mo, and 3Cr-1Mo-1/4VAlloy Steel Heavy Wall Pressure Vessels for High Temperature, High Pressure Hydrogen Service
API RP 934A 2nd Ed 2010.pdf 1.132 MB

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

I HAVE ONLY API RP 934C, API TR 943C IS NOT AVAILABLE

Materials and Fabrication Requirements for 1-1/4/3Cr Alloy Steel Heavy Wall Pressure Vessels for High Pressure Hydrogen Service Operating at below 825 deg F (441 deg C)
API RP 934-C 1st Ed 2008.pdf 1.158 MB

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[suhairi]

Thank you very much

[cpchonburi]

Thanks a lot, Achmad Nur Eddin.

[rdudyanto]

mas, upload lagi API 934 A. aku perlu banget. sukron suwun

[Achmad Nur Eddin]

mas, upload lagi API 934 A. aku perlu banget. sukron suwun

Monggo untalen kabeh

Materials and Fabrication Requirements for 2-1/4Cr-1Mo & 3Cr-1Mo Steel Heavy Wall Pressure Vessels for High Temperature, High Pressure Hydrogen Service
API RP 934 1st Ed 2000.pdf 0.157 MB

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]
Materials and Fabrication Requirements for 2-1/4/3Cr , 2 1/4Cr-1Mo-1/4V , 3Cr-1Mo, and 3Cr-1Mo-1/4VAlloy Steel Heavy Wall Pressure Vessels for High Temperature, High Pressure Hydrogen Service
API RP 934A 2nd Ed 2010.pdf 1.132 MB

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]
Materials and Fabrication Requirements for 1-1/4/3Cr Alloy Steel Heavy Wall Pressure Vessels for High Pressure Hydrogen Service Operating at below 825 deg F (441 deg C)
API RP 934-C 1st Ed 2008.pdf 1.158 MB

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]
Recommended Practice for Materials and Fabrication of 1¼Cr-½Mo Steel Pressure Vessels for Service above 825˚F (441˚C)
API RP 934-E 1st Ed 2008.pdf 0.163 MB

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]
Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants
API RP 941 7th Ed 2008.pdf 0.980 MB

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]
The Technical Basis Document for API RP 941
API TR 941-2008.pdf 4.386 MB

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[rdudyanto]

suwun kang

[notachance]

Can anyone upload API 934-C again plz?
Thnx

[belonk_182]

kang ahmad, file-e didelete kabeh, iso njaluk tulung kah di reupload utawa kirim email neng kene belonk_182@yahoo.com?

Suwun sakdurunge

[ThaMaestro]

Could anyone please re-upload API RP 943A,-B,-C,-D and API TR 941?

[xgiorg]

Could anyone please re-upload API RP 943A,-B,-C,-D and API TR 941?

I need the same

[Achmad Nur Eddin]

EMPLOK-EN SAIKI, MONGGOOOOO

API MATERIAL ENGINEERING PUBLICATION.rar 20.180 MB consist of :

API PUB 938 1996.pdf - An Experimental Study of Causes and Repair of -----ing of 1 1/4 Cr- 1/2Mo Steel Equipment
API Publ 937-A 2005.pdf - Study to Establish Relations for the Relative Strength of API 650 Cone Roof, Roof-to-Shell and Shell-to-Bottom Joints

API RP 571 1st Ed 2003.pdf - Damage Mechanisms Affecting Fixed Equipment in the Refining Industry

API RP 582 1st Ed 2001.pdf - Recommended Practice and Supplementary Welding Guidelines for the Chemical, Oil, and Gas Industries

API RP 934 1st Ed 2000.pdf -Materials and Fabrication Requirements for 2-1/4Cr-1Mo & 3Cr-1Mo Steel Heavy Wall Pressure Vessels for High Temperature, High Pressure Hydrogen Service

API RP 934A 2nd Ed 2010.pdf - Materials and Fabrication Requirements for 2-1/4/3Cr , 2 1/4Cr-1Mo-1/4V , 3Cr-1Mo, and 3Cr-1Mo-1/4VAlloy Steel Heavy Wall Pressure Vessels for High Temperature, High Pressure Hydrogen Service

API RP 934-C 1st Ed 2008.pdf - Materials and Fabrication Requirements for 1-1/4/3Cr Alloy Steel Heavy Wall Pressure Vessels for High Pressure Hydrogen Service Operating at below 825 deg F (441 deg C)

API RP 934-E 1st Ed 2008.pdf - Recommended Practice for Materials and Fabrication of 1¼Cr-½Mo Steel Pressure Vessels for Service above 825˚F (441˚C)

API RP 936 2nd Ed 2004.pdf -Refractory Installation Quality Control Specification—Inspection and Testing Monolithic Refractory Linings and Materials

API RP 941 7th Ed 2008.pdf - Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants

API RP 945 3rd Ed 2003.pdf - Avoiding Environmental -----ing in Amine Units

API TR 938C 2nd Ed 2011.pdf - Use of Duplex Stainless Steels in the Oil Refining Industry

API TR 941-2008.pdf - The Technical Basis Document for API RP 941

[link Point to another website Only the registered members can access]