How to fix the following Eclipse 100 errors?

[pet_spec]

@-- error at time 0.0 days ( 1-jan-1997):
@ insufficient data to compute pore volumes
@ pore volumes will be set to zero

@-- error at time 0.0 days ( 1-jan-1997):
@ insufficient data to compute cell centre depths

@-- error at time 0.0 days ( 1-jan-1997):
@ insufficient data to compute x transmissibilities

@-- error at time 0.0 days ( 1-jan-1997):
@ insufficient data to compute y transmissibilities

@-- error at time 0.0 days ( 1-jan-1997):
@ insufficient data to compute z transmissibilities

@--comment at time 0.0 days ( 1-jan-1997):

1) Why eclipse doesn't calculate pore volume? I have correctly provided cell porosity and its DX,DY, and DZ dimensions. But it still shows an error .

2) What is needed to calculate center depth? Does Eclipse do it automatically?

3) How transmissibility should be calculated? Do I need to do it manually?

Thanks.

[DAH7542]

1) Why eclipse doesn't calculate pore volume? I have correctly provided cell porosity and its DX,DY, and DZ dimensions. But it still shows an error .
- Did you provide NTG?, it's required for both pore vol and transmissibility calculations.
- Are you using an extremely high value of MINPV so that you are deactivating the whole model?
- Check your ACTNUM keyword to make sure you are deactivating the right cells.
Check this.

2) What is needed to calculate center depth? Does Eclipse do it automatically?
- Eclipse does this internally once input data is correctly provided.

3) How transmissibility should be calculated? Do I need to do it manually?
- Eclipse does this internally once input data is correctly provided.

Let us take a look of your *.data file to check it.

[pet_spec]

1) Why eclipse doesn't calculate pore volume? I have correctly provided cell porosity and its DX,DY, and DZ dimensions. But it still shows an error .
- Did you provide NTG?, it's required for both pore vol and transmissibility calculations.
- Are you using an extremely high value of MINPV so that you are deactivating the whole model?
- Check your ACTNUM keyword to make sure you are deactivating the right cells.
Check this.

2) What is needed to calculate center depth? Does Eclipse do it automatically?
- Eclipse does this internally once input data is correctly provided.

3) How transmissibility should be calculated? Do I need to do it manually?
- Eclipse does this internally once input data is correctly provided.

Let us take a look of your *.data file to check it.

Actually i entered pore volume, PV, as the result of porosity *DX*DY*DZ.
I have attached my input data in .txt format as Eclipse doesn't accept .data file.

[pet_spec]

Actually i entered pore volume, PV, as the result of porosity *DX*DY*DZ.
I have attached my input data in .txt format as Eclipse doesn't accept .data file.

Thanks mate for your help.

Actually, I would like to launch the well for 300 days and to shut it for 200 days then. How can I enter such commands?

[DAH7542]

Thanks mate for your help.

Actually, I would like to launch the well for 300 days and to shut it for 200 days then. How can I enter such commands?

Use the keyword WELOPEN (write it with one "L" only), refer to the ECL reference manual for more details.

[Enet]

Hi, thanks for your reply. Please can I have your email to that I can send you the data file. I'm the person you just replied to few minutes ago. I've been trying to reply you but they said you have exceeded your private message quota.

[DAH7542]

I found and solved many problems in your run, not only with respect to the global grid and LGR definition but with the Schedule section. It is running without problems now.

[Aamir Lokhandwala]

Hello,

I am unable to download the above attachment. Please help.

[Aamir Lokhandwala]

Hello,

I am unable to download the above attachment. Please help.

[06pg22]

ECLIPSE 300 use different PROPS data than does ECLIPSE 100.
Moreover, some keywords in SCHEDULE section are also added/changed when u switched to ECLIPSE 300

[pet_spec]

ECLIPSE 300 use different PROPS data than does ECLIPSE 100.
Moreover, some keywords in SCHEDULE section are also added/changed when u switched to ECLIPSE 300

Yeah ... I know. But I used Eclipse 100 only and manual for it.

[06pg22]

ECLIPSE 300 use different PROPS data than does ECLIPSE 100.
Moreover, some keywords in SCHEDULE section are also added/changed when u switched to ECLIPSE 300