<

Results 1 to 3 of 3

Thread: ISO Collection 144/300: ISO/TC 27-Solid mineral fuels

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    ISO Collection 144/300: ISO/TC 27-Solid mineral fuels

    ISO/TC 27
    ISO 11760:2005 Classification of coals

    Coal preparation: Terminology and performance
    ISO 561:1989 Coal preparation plant -- Graphical symbols
    ISO 923:2000 Coal cleaning equipment -- Performance evaluation
    ISO 924:1989 Coal preparation plant -- Principles and conventions for flowsheets
    ISO 1213-1:1993 Solid mineral fuels -- Vocabulary -- Part 1: Terms relating to coal preparation
    ISO 1213-2:2016 Solid mineral fuels -- Vocabulary -- Part 2: Terms relating to sampling* testing and analysis
    ISO 1953:2015 Hard coal -- Size analysis by sieving
    ISO 7936:1992 Hard coal -- Determination and presentation of float and sink characteristics -- General directions for apparatus and procedures
    ISO 8833:1989 Magnetite for use in coal preparation -- Test methods
    ISO 8858-1:1990 Hard coal -- Froth flotation testing -- Part 1: Laboratory procedure
    ISO 8858-2:2004 Hard coal -- Froth flotation testing -- Part 2: Sequential evaluation
    ISO 8858-3:2004 Hard coal -- Froth flotation testing -- Part 3: Release evaluation
    ISO 10086-1:2000 Coal -- Methods for evaluating flocculants for use in coal preparation -- Part 1: Basic parameters
    ISO 10086-2:2004 Coal -- Methods for evaluating flocculants for use in coal preparation -- Part 2: Flocculants as filter aids in rotary vacuum filtration systems
    ISO 10752:1994 Coal sizing equipment -- Performance evaluation
    ISO 10753:1994 Coal preparation plant -- Assessment of the liability to breakdown in water of materials associated with coal seams
    ISO 15117-1:2004 Coal flow properties -- Part 1: Bin flow
    ISO 15239:2005 Solid mineral fuels -- Evaluation of the measurement performance of on-line analysers
    ISO 20905:2004 Coal preparation -- Determination of dust/moisture relationship for coal
    ISO 23499:2013 Coal -- Determination of bulk density for the use in charging of coke ovens


    Coke
    ISO 556:1980 Coke (greater than 20 mm in size) -- Determination of mechanical strength
    ISO 567:1995 Coke -- Determination of bulk density in a small container
    ISO 616:1995 Coke -- Determination of shatter indices
    ISO 728:1995 Coke (nominal top size greater than 20 mm) -- Size analysis by sieving
    ISO 1013:1995 Coke -- Determination of bulk density in a large container
    ISO 1014:1985 Coke -- Determination of true relative density* apparent relative density and porosity
    ISO 1014:1985/Cor 1:1994 Coke -- Determination of true relative density* apparent relative density and porosity
    ISO 2325:1986 Coke -- Size analysis (Nominal top size 20 mm or less)
    ISO 18894:2006 Coke -- Determination of coke reactivity index (CRI) and coke strength after reaction (CSR)


    Sampling
    ISO 5069-1:1983 Brown coals and lignites -- Principles of sampling -- Part 1: Sampling for determination of moisture content and for general analysis
    ISO 5069-2:1983 Brown coals and lignites -- Principles of sampling -- Part 2: Sample preparation for determination of moisture content and for general analysis
    ISO 9931:1991 Coal -- Sampling of pulverized coal conveyed by gases in direct fired coal system
    ISO 13909-1:2016 Hard coal and coke -- Mechanical sampling -- Part 1: General introduction
    ISO 13909-2:2016 Hard coal and coke -- Mechanical sampling -- Part 2: Coal -- Sampling from moving streams
    ISO 13909-3:2016 Hard coal and coke -- Mechanical sampling -- Part 3: Coal -- Sampling from stationary lots
    ISO 13909-4:2016 Hard coal and coke -- Mechanical sampling -- Part 4: Coal -- Preparation of test samples
    ISO 13909-5:2016 Hard coal and coke -- Mechanical sampling -- Part 5: Coke -- Sampling from moving streams
    ISO 13909-6:2016 Hard coal and coke -- Mechanical sampling -- Part 6: Coke -- Preparation of test samples
    ISO 13909-7:2016 Hard coal and coke -- Mechanical sampling -- Part 7: Methods for determining the precision of sampling* sample preparation and testing
    ISO 13909-8:2016 Hard coal and coke -- Mechanical sampling -- Part 8: Methods of testing for bias
    ISO 14180:1998 Solid mineral fuels -- Guidance on the sampling of coal seams
    ISO 18283:2006 Hard coal and coke -- Manual sampling
    ISO 18283:2006/Cor 1:2009 Hard coal and coke -- Manual sampling
    ISO 20904:2006 Hard coal -- Sampling of slurries
    ISO 21398:2007 Hard coal and coke -- Guidance to the inspection of mechanical sampling systems


    Methods of analysis
    ISO 157:1996 Coal -- Determination of forms of sulfur
    ISO 157:1996/Cor 1:1999 Coal -- Determination of forms of sulfur
    ISO 334:2013 Solid mineral fuels -- Determination of total sulfur -- Eschka method
    ISO 349:1975 Hard coal -- Audibert-Arnu dilatometer test
    ISO 501:2012 Hard coal -- Determination of the crucible swelling number
    ISO 502:2015 Coal -- Determination of caking power -- Gray-King coke test
    ISO 540:2008 Hard coal and coke -- Determination of ash fusibility
    ISO 562:2010 Hard coal and coke -- Determination of volatile matter
    ISO 579:2013 Coke -- Determination of total moisture
    ISO 587:1997 Solid mineral fuels -- Determination of chlorine using Eschka mixture
    ISO 589:2008 Hard coal -- Determination of total moisture
    ISO 602:2015 Coal -- Determination of mineral matter
    ISO 609:1996 Solid mineral fuels -- Determination of carbon and hydrogen -- High temperature combustion method
    ISO 609:1996/Cor 1:1996 Solid mineral fuels -- Determination of carbon and hydrogen -- High temperature combustion method
    ISO 622:2016 Solid mineral fuels -- Determination of phosphorus content -- Reduced molybdophosphate photometric method
    ISO 625:1996 Solid mineral fuels -- Determination of carbon and hydrogen -- Liebig method
    ISO 625:1996/Cor 1:1996 Solid mineral fuels -- Determination of carbon and hydrogen -- Liebig method
    ISO 647:1974 Brown coals and lignites -- Determination of the yields of tar* water* gas and coke residue by low temperature distillation
    ISO 687:2010 Solid mineral fuels -- Coke -- Determination of moisture in the general analysis test sample
    ISO 925:1997 Solid mineral fuels -- Determination of carbonate carbon content -- Gravimetric method
    ISO 975:2013 Brown coals and lignites -- Determination of yield of benzene-soluble extract -- Semi-automatic method
    ISO 1017:2006 Brown coals and lignites -- Determination of acetone-soluble material ("resinous substance") in the benzene-soluble extract
    ISO 1018:1975 Hard coal -- Determination of moisture-holding capacity
    ISO 10329:2009 Coal -- Determination of plastic properties -- Constant-torque Gieseler plastometer method
    ISO 1170:2013 Coal and coke -- Calculation of analyses to different bases
    ISO 1171:2010 Solid mineral fuels -- Determination of ash
    ISO 1928:2009 Solid mineral fuels -- Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
    ISO 1952:2008 Solid mineral fuels -- Determination of extractable metals in dilute hydrochloric acid
    ISO 2950:1974 Brown coals and lignites -- Classification by types on the basis of total moisture content and tar yield
    ISO 5068-1:2007 Brown coals and lignites -- Determination of moisture content -- Part 1: Indirect gravimetric method for total moisture
    ISO 5068-2:2007 Brown coals and lignites -- Determination of moisture content -- Part 2: Indirect gravimetric method for moisture in the analysis sample
    ISO 5071-1:2013 Brown coals and lignites -- Determination of the volatile matter in the analysis sample -- Part 1: Two-furnace method
    ISO 5072:2013 Brown coals and lignites -- Determination of true relative density and apparent relative density
    ISO 5073:2013 Brown coals and lignites -- Determination of humic acids
    ISO 5074:2015 Hard coal -- Determination of Hardgrove grindability index
    ISO 7404-1:2016 Methods for the petrographic analysis of coals -- Part 1: Vocabulary
    ISO 7404-2:2009 Methods for the petrographic analysis of coals -- Part 2: Methods of preparing coal samples
    ISO 7404-3:2009 Methods for the petrographic analysis of coals -- Part 3: Method of determining maceral group composition
    ISO 7404-4:1988 Methods for the petrographic analysis of bituminous coal and anthracite -- Part 4: Method of determining microlithotype* carbominerite and minerite composition
    ISO 7404-5:2009 Methods for the petrographic analysis of coals -- Part 5: Method of determining microscopically the reflectance of vitrinite
    ISO 8264:1989 Hard coal -- Determination of the swelling properties using a dilatometer
    ISO 11722:2013 Solid mineral fuels -- Hard coal -- Determination of moisture in the general analysis test sample by drying in nitrogen
    ISO 11723:2016 Solid mineral fuels -- Determination of arsenic and selenium -- Eschka's mixture and hydride generation method
    ISO 11724:2016 Solid mineral fuels -- Determination of total fluorine in coal* coke and fly ash
    ISO 11726:2004 Solid mineral fuels -- Guidelines for the validation of alternative methods of analysis
    ISO 12900:2015 Hard coal -- Determination of abrasiveness
    ISO/TS 13605:2012 Solid mineral fuels -- Major and minor elements in hard coal ash and coke ash -- Wavelength dispersive X-ray fluorescence spectrometric method
    ISO 15237:2016 Solid mineral fuels -- Determination of total mercury content of coal
    ISO 15238:2016 Solid mineral fuels -- Determination of total cadmium content of coal
    ISO 15585:2006 Hard coal -- Determination of caking index
    ISO 17246:2010 Coal -- Proximate analysis
    ISO 17247:2013 Coal -- Ultimate analysis
    ISO/TS 18806:2014 Solid mineral fuels -- Determination of Chlorine content
    ISO 19579:2006 Solid mineral fuels -- Determination of sulfur by IR spectrometry
    ISO 23380:2013 Selection of methods for the determination of trace elements in coal
    ISO 23873:2010 Hard coal -- Method for the measurement of the swelling of hard coal using a dilatometer
    ISO 29541:2010 Solid mineral fuels -- Determination of total carbon* hydrogen and nitrogen content -- Instrumental method


    the missing are:

    ISO 561:1989 Coal preparation plant -- Graphical symbols
    ISO 1213-2:2016 Solid mineral fuels -- Vocabulary -- Part 2: Terms relating to sampling* testing and analysis
    ISO 7936:1992 Hard coal -- Determination and presentation of float and sink characteristics -- General directions for apparatus and procedures
    ISO 556:1980 Coke (greater than 20 mm in size) -- Determination of mechanical strength
    ISO 1014:1985 Coke -- Determination of true relative density* apparent relative density and porosity
    ISO 1014:1985/Cor 1:1994 Coke -- Determination of true relative density* apparent relative density and porosity
    ISO 5069-1:1983 Brown coals and lignites -- Principles of sampling -- Part 1: Sampling for determination of moisture content and for general analysis
    ISO 9931:1991 Coal -- Sampling of pulverized coal conveyed by gases in direct fired coal system
    ISO 157:1996/Cor 1:1999 Coal -- Determination of forms of sulfur
    ISO 349:1975 Hard coal -- Audibert-Arnu dilatometer test
    ISO 622:2016 Solid mineral fuels -- Determination of phosphorus content -- Reduced molybdophosphate photometric method
    ISO 647:1974 Brown coals and lignites -- Determination of the yields of tar* water* gas and coke residue by low temperature distillation
    ISO 8264:1989 Hard coal -- Determination of the swelling properties using a dilatometer


    the link:

    [link Point to another website Only the registered members can access]


  2. #2

    Re: ISO Collection 144/300: ISO/TC 27-Solid mineral fuels

    update:

    added missing or better quality or new:

    ISO 561:1989 Coal preparation plant -- Graphical symbols
    ISO 1213-2:2016 Solid mineral fuels -- Vocabulary -- Part 2: Terms relating to sampling* testing and analysis
    ISO 7936:1992 Hard coal -- Determination and presentation of float and sink characteristics -- General directions for apparatus and procedures
    ISO 8858-1:1990 Hard coal -- Froth flotation testing -- Part 1: Laboratory procedure
    ISO 556:1980 Coke (greater than 20 mm in size) -- Determination of mechanical strength
    ISO 1014:1985 Coke -- Determination of true relative density* apparent relative density and porosity
    ISO 5069-1:1983 Brown coals and lignites -- Principles of sampling -- Part 1: Sampling for determination of moisture content and for general analysis
    ISO 5069-2:1983 Brown coals and lignites -- Principles of sampling -- Part 2: Sample preparation for determination of moisture content and for general analysis
    ISO 9931:1991 Coal -- Sampling of pulverized coal conveyed by gases in direct fired coal system
    ISO 14180:2017 Solid mineral fuels -- Guidance on the sampling of coal seams
    ISO 349:1975 Hard coal -- Audibert-Arnu dilatometer test
    ISO 622:2016 Solid mineral fuels -- Determination of phosphorus content -- Reduced molybdophosphate photometric method
    ISO 11723:2016 Solid mineral fuels -- Determination of arsenic and selenium -- Eschka's mixture and hydride generation method
    ISO 11724:2016 Solid mineral fuels -- Determination of total fluorine in coal* coke and fly ash
    ISO 15237:2016 Solid mineral fuels -- Determination of total mercury content of coal
    ISO 15238:2016 Solid mineral fuels -- Determination of total cadmium content of coal


    new missing list:

    ISO 1014:1985/Cor 1:1994 Coke -- Determination of true relative density* apparent relative density and porosity
    ISO 157:1996/Cor 1:1999 Coal -- Determination of forms of sulfur
    ISO 647:2017 Brown coals and lignites -- Determination of the yields of tar* water* gas and coke residue by low temperature distillation
    ISO 8264:1989 Hard coal -- Determination of the swelling properties using a dilatometer


    [link Point to another website Only the registered members can access]


  3.    Sponsored Links



    -

  4. Re: ISO Collection 144/300: ISO/TC 27-Solid mineral fuels

    Nice! Thank you. Just all that i ever needed

  •   

Similar Threads

  1. CEN Standards Collection 90/370: CEN TC 343 - Solid Recovered Fuels
    By BornToSin in forum Mechanical Engineering
    Replies: 6
    Last Post: 11-30-2017, 03:09 AM
  2. CEN Standards Collection 77/370: CEN SS N02 - Solid Fuels
    By BornToSin in forum Mechanical Engineering
    Replies: 6
    Last Post: 11-27-2017, 02:43 AM
  3. Replies: 9
    Last Post: 05-30-2017, 12:56 AM
  4. Pollutants Generated by the Combustion of Solid Biomass Fuels
    By Han Ah kwang in forum Safety And Environment
    Replies: 1
    Last Post: 01-24-2015, 02:34 AM
  5. Power Generation from Solid Fuels
    By Azad in forum General Engineering
    Replies: 7
    Last Post: 03-12-2014, 09:46 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •