600+ Engineering xls

[motaleby]

--


All I have, as always!
part-01: 15.7 MB, part-02: 16.6 MB, part-03: 12.2 MB, part-04:7.57 MB, part-05: 12.3 MB, part-06: 13.0 MB, part-07: 3.31 MB

at first see the files list:


# Directory Lister Pro v1.0 listing #

*****PART -1 *****PART -1 *****PART -1 *****PART -1 *****PART -1 *****PART -1 *****
Name Size
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\Piping Design Spreadsheets\ (11) 8 484 KB
-----------------------------------------------------------------------------------------------------------------
1. Flange Rating_(NPS 0.5~24)_V3.0.xls 559 KB
2. Flange Rating_Large Diameter_(NPS 26~60)_V1.0.xls 770 KB
3. FRP Fittings Guide.xls 2 927 KB
4. IMPERIAL PIPING WEIGHT LOAD CALCULATION WORKBOOK.XLS 130 KB
5. METRIC PIPING WEIGHT CALCULATION WORKSHEET.XLS 174 KB
6. Pipe P vs T Data.xls 673 KB
7. Pipe Size Optimization.xls 43 KB
8. Pressure Drop & Flowrate-Karman.xls 66 KB
9. Thickness & Weld Branch Calculation-ASME B31.3.xls 2 958 KB
10. TW ASME-Imp.xls 124 KB
11. TW Thermo-Kinetics.xls 61 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\Pressure Vessel Excel Macro\ (2) 343 KB
-----------------------------------------------------------------------------------------------------------------
1. pressure-vessel-vba-excel97.xlt 182 KB
2. Unfired%20Pressure-Vessel-Macro-July-2005-Instructions.pdf 161 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\Steamturbine-diag-1step-UK\ (2) 5 439 KB
-----------------------------------------------------------------------------------------------------------------
1. Problem.txt 1 KB
2. Steamturbine-diag-1step-UK.EXE 5 438 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\BASIC PETROLEUM ECONOMICS\ (7) 405 KB
-----------------------------------------------------------------------------------------------------------------
1. BEC-EXERCISE 4-4 & 5-9.xls 105 KB
2. BEC-EXERCISES - CHAPTER 2.xls 88 KB
3. BEC-EXERCISES - CHAPTER 3.xls 26 KB
4. BEC-EXERCISES - CHAPTER 4.xls 19 KB
5. BEC-EXERCISES - CHAPTER 5.xls 39 KB
6. BEC-EXERCISES - CHAPTER 6.xls 55 KB
7. BEC-EXERCISES 4-3 & 5-6.xls 74 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\databank\ (4) 480 KB
-----------------------------------------------------------------------------------------------------------------
1. data.xls 181 KB
2. Databank.xla 292 KB
3. Leame.txt 4 KB
4. Readme.txt 4 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\turbines10\ (0) 460 KB
-----------------------------------------------------------------------------------------------------------------
<propuesta1> 0 KB
<propuesta2> 0 KB
<propuesta3> 0 KB
<propuesta4> 0 KB
<propuesta5> 0 KB
<Turbines1> 0 KB
<Turbines2> 0 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\turbines10\propuesta1\ (0) 0 KB
-----------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\turbines10\propuesta2\ (0) 0 KB
-----------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\turbines10\propuesta3\ (0) 0 KB
-----------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\turbines10\propuesta4\ (0) 0 KB
-----------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\turbines10\propuesta5\ (0) 0 KB
-----------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\turbines10\Turbines1\ (6) 196 KB
-----------------------------------------------------------------------------------------------------------------
1. readme.txt 1 KB
2. satur 3 KB
3. sobrecal 7 KB
4. Turbinas1.c 26 KB
5. Turbinas1.doc 30 KB
6. turbinas1.exe 129 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\turbines10\Turbines2\ (7) 265 KB
-----------------------------------------------------------------------------------------------------------------
1. draw.m 0 KB
2. readme.txt 1 KB
3. satur 3 KB
4. sobrecal 7 KB
5. Turbinas2.c 23 KB
6. Turbinas2.doc 101 KB
7. Turbinas2.exe 130 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\Ctowr321\ (2) 37 KB
-----------------------------------------------------------------------------------------------------------------
1. CTOWER.DOC 1 KB
2. CTOWER.EXE 36 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\Column Design\ (7) 944 KB
-----------------------------------------------------------------------------------------------------------------
1. arialb32.exe 164 KB
2. Barsched.xlt 512 KB
3. readme.txt 11 KB
4. Shape99.xlt 146 KB
5. SteelPac.doc 59 KB
6. TEKTON~N.TTF 38 KB
7. web site.xls 15 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\Physical Properties of Water Steam Mixtures\ (14) 173 KB
-----------------------------------------------------------------------------------------------------------------
1. ENGI_H2O.EX_ 38 KB
2. ENGI_H2O.HL_ 19 KB
3. ENGI_H2O.IN_ 0 KB
4. ENGI_H2O.LIC 0 KB
5. MSAFINX.DL_ 17 KB
6. PICCLIP.VB_ 10 KB
7. README.TXT 3 KB
8. SETUP.EXE 15 KB
9. SETUP.LST 0 KB
10. SETUP1.EX_ 19 KB
11. SETUPKIT.DL_ 4 KB
12. THREED.VB_ 33 KB
13. VENDINFO.DIZ 7 KB
14. VER.DL_ 9 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\Chemical Predictor\ (7) 134 KB
-----------------------------------------------------------------------------------------------------------------
1. AVEXTRA.TXT 0 KB
2. CHEM.BMP 33 KB
3. CUSTOM.DAT 0 KB
4. DATA.DAT 8 KB
5. ELE.DAT 1 KB
6. PREDICT.EXE 91 KB
7. READ_ME.TXT 1 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\MW Calculator\ (7) 244 KB
-----------------------------------------------------------------------------------------------------------------
1. BWCC.DLL 148 KB
2. DISCLAIM.WRI 1 KB
3. MOLWT.DAT 1 KB
4. MOLWT.EXE 57 KB
5. MOLWT.HLP 31 KB
6. README.WRI 4 KB
7. VENDOR.WRI 2 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\FactZ\ (7) 430 KB
-----------------------------------------------------------------------------------------------------------------
1. a9a07»FactZ-Manual.pdf 349 KB
2. FactZ.exe 72 KB
3. GAS1.TXT 0 KB
4. GAS2.TXT 1 KB
5. Important.txt 0 KB
6. Lista.txt 1 KB
7. Readme.txt 7 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\Mechanical Design Spreadsheets\ (11) 1 525 KB
-----------------------------------------------------------------------------------------------------------------
1. 296_Material Database ver E4.01.xls 101 KB
2. 297_Pipe and Shell Design Tool ver E4.01.xls 74 KB
3. 298_Cone Design Tool ver E4.01.xls 66 KB
4. 299_Elliptical Head Design Tool ver E4.01.xls 78 KB
5. 300_F&D Head Design Tool ver E4.01.xls 102 KB
6. 301_Hemispherical Head Design Tool ver E4.01.xls 69 KB
7. 302_Nozzle Design Tool ver E4.01.xls 95 KB
8. 303_Nozzle and Repad Design Tool ver E4.01.xls 100 KB
9. 326_Cone Layout Tool ver E4.02.xls 512 KB
10. COLLAPSE PRESSURE SUPPORT SPACING.XLS 245 KB
11. Nozzle Loads WRC 107 ver 1.1.xls 85 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\designing separation vessels\ (2) 252 KB
-----------------------------------------------------------------------------------------------------------------
1. Knockout_design.xls 21 KB
2. Knockout_drum.doc 232 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\Instrumentation Design Spreadsheets\ (9) 1 443 KB
-----------------------------------------------------------------------------------------------------------------
1. CVCALCS.xls 40 KB
2. CVGAS.xls 23 KB
3. CVOIL.xls 21 KB
4. Instt Air Consumption.xls 19 KB
5. mA to PLC Raw Count Conversion.xls 44 KB
6. Mercer_Pilot Valve Sizing_v5.1.xls 624 KB
7. Mercer_Spring Valve Sizing_v4.99.xls 580 KB
8. Orifice Calculation.xls 24 KB
9. Ross_Valve Sizing.xls 69 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\mccabe\ (3) 80 KB
-----------------------------------------------------------------------------------------------------------------
1. EGAVGA.BGI 5 KB
2. MCCABE.EXE 72 KB
3. Mccabe.txt 3 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\colebrook\ (5) 95 KB
-----------------------------------------------------------------------------------------------------------------
1. fEq1.bas 2 KB
2. fEq2.bas 2 KB
3. fEq3.bas 2 KB
4. Friction Factor Formulas for Cheresources.xls 90 KB
5. fSerg.bas 1 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\Total Austral\ (19) 1 487 KB
-----------------------------------------------------------------------------------------------------------------
1. C3CYCLC.XLS 72 KB
2. C3CYCLV.XLS 73 KB
3. CCC1.XLS 17 KB
4. CCC2.XLS 31 KB
5. CCC3.XLS 29 KB
6. CPC.XLS 16 KB
7. cyclone.xls 78 KB
8. DIMENSIO.DOC 51 KB
9. FACTORZ.XLS 44 KB
10. FACTORZ3.XLS 58 KB
11. Fire PSV.xls 147 KB
12. Gravity Flow.xls 17 KB
13. LLSEP.XLS 13 KB
14. PDGLM1.XLS 17 KB
15. PDGLM2.XLS 19 KB
16. PDGLM3.XLS 19 KB
17. PDLL.XLS 72 KB
18. SIMUL97.XLS 132 KB
19. VERSEP.XLS 587 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\Filtration\ (9) 836 KB
-----------------------------------------------------------------------------------------------------------------
1. compressible cake constant pressure profile.xls 47 KB
2. compressible cake constant pressure.xls 103 KB
3. compressible cake constant rate.xls 50 KB
4. constant pressure filtration.xls 21 KB
5. documentation.pdf 526 KB
6. power law equation.xls 19 KB
7. pressure leaf clarification costing.xls 25 KB
8. rotary vacuum filter.xls 24 KB
9. specific surface area.xls 23 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\Excel based software for Production Engineers\ (59) 10 988 KB
-----------------------------------------------------------------------------------------------------------------
<Mud Programs> 0 KB
1. 3d WELL PLANNING.XLS 73 KB
2. Aerated Annular Pressures.XLS 35 KB
3. AGL_DSN.xls 93 KB
4. AGL_FLD.xls 111 KB
5. AGL_GRAD.xls 127 KB
6. AGL_SET.xls 115 KB
7. AGL_SPAC.xls 87 KB
8. AGL_TEMP.xls 79 KB
9. ALLOWABLE DRILLING TORQUE.XLS 30 KB
10. API CASING DESIGN.XLS 94 KB
11. API TUBULAR STRENGTHS.XLS 30 KB
12. AVAILABLE STRING WEIGHT FOR THE BIT.XLS 32 KB
13. BIT HYDRAULICS WITH RIG PUMPING TEST.XLS 36 KB
14. Bit Selection & Performance.xls 91 KB
15. Bottom Hole Assembly Design and Usage.XLS 51 KB
16. Buckling & Wellhead Load After Cementing.XLS 40 KB
17. casing (API) Tables.xls 48 KB
18. CASING CEMENTING.xls 111 KB
19. Casing Properties.xls 164 KB
20. CEMENT3.XLS 383 KB
21. CT_TEMP.xls 158 KB
22. DIRECTIONAL PLANNING.XLS 50 KB
23. DRILL STRING & TUBULAR RUNNING LOAD in tangent hole.XLS 41 KB
24. Drill String Tables.xls 112 KB
25. Drilling BOP Data.xls 153 KB
26. drilling calculations.xls 424 KB
27. DRILLPIPE DESIGN.XLS 190 KB
28. FATIGUE OF DRILLPIPE.XLS 28 KB
29. Generic Sectional Method 6-10-04.XLS 109 KB
30. Graphically CASING DESIGN.XLS 37 KB
31. HORIZONTAL TRAJECTORY PLAN (KOP).XLS 32 KB
32. Hydraul3.xls 222 KB
33. Hydraulic calculations.xls 207 KB
34. IDEAL KICK REMOVAL.XLS 41 KB
35. INTERP TEN 6-10-04.XLS 31 KB
36. Kill Sheet1.xls 78 KB
37. Kilshet7.xls 794 KB
38. LEAD OF TARGET PATH.XLS 52 KB
39. LONG's METHOD OF SURVEY COMPUTATION.xls 361 KB
40. MAXIMUM ALLOWABLE CASING PRESSURE.xls 76 KB
41. MUD MIXING.XLS 37 KB
42. Mud Motors, Jets & Surveys.xls 126 KB
43. Multiple Regression Equations.XLS 97 KB
44. PILOT HOLEBIT & HOLE OPENERS.xls 167 KB
45. POWER LAW PRESSURE LOSS.XLS 29 KB
46. PRIMARY CEMENTATION.XLS 37 KB
47. PUMPING RATES FOR CEMENT SPACERS.XLS 33 KB
48. SURFACE CASING TALLY & DESIGN.xls 206 KB
49. SURGE AND SWAB.XLS 27 KB
50. Survey3.xls 1 269 KB
51. TUBING MOVEMENT AND STRESSES 01.XLS 55 KB
52. TUBING MOVEMENT AND STRESSES 02.XLS 108 KB
53. VERTICAL TURNS TO NEW TRACK.XLS 34 KB
54. WELL Calculations.XLS 794 KB
55. WELL CONTROL DATA SHEET for DIRECTIONAL WELLS Wt. & Wt. METHOD.xls 154 KB
56. WELL CONTROL DATA SHEET for DRILLER'S METHOD.xls 174 KB
57. WELL CONTROL DATA SHEET for VERTICAL WELLS Wt. & Wt. METHOD.xls 140 KB
58. WellControlI.xls 217 KB
59. WELLCOST Calculations.XLS 61 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\Excel based software for Production Engineers\Mud Programs\ (3) 2 217 KB
-----------------------------------------------------------------------------------------------------------------
1. BASIC MUD REPORTv1.5.xls 584 KB
2. MudEng2.55.xls 1 284 KB
3. Simple Mud Engineerv1.22.xls 349 KB
-----------------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\Process Design Spreadsheets\ (3) 1 427 KB
-----------------------------------------------------------------------------------------------------------------
1. Column Design.zip 663 KB
2. Filtration.zip 606 KB
3. variouscalcs.zip 158 KB



---

[motaleby]

////////////////////////////////////-----------------------------------------\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\





# Directory Lister Pro v1.0 listing


***** PART 2 TO 7 ********** PART 2 TO 7 ********** PART 2 TO 7 ********** PART 2 TO 7 *****

Name Size
-------------------------------------------------------------------------------------------------------
h:\All Ebooks\Spreadsheets Calculation\ (438) 204 058 KB
-------------------------------------------------------------------------------------------------------

1. (EDITED-FINAL)Sludge - storage calculation.xls 61 KB
2. 11540656-NPSH-Calculator-For-Process-Engineer.xls 136 KB
3. 1252106057Bit HydraulicsTFA.xls 25 KB
4. 2009_Separator_Calcs.xls 76 KB
5. 2010_SHURflo-Shertech_PumpParts_Pricing.xls 317 KB
6. 20725830-Drain-a-Tank-Calculation.xls 2 164 KB
7. 23671371-Guide-to-Refinery-Process.xls 82 KB
8. 2944785-scrubber-design.xls 694 KB
9. 2Phase Relief.xls 631 KB
10. 2Phase Sep. sizing.xls 22 KB
11. 2phasedensity.xls 15 KB
12. 37 Tank Support Cover.xls 6 423 KB
13. 54 Tank Test Measurements.xls 26 303 KB
14. 7752137-Cost-Calculation.xls 24 KB
15. A-AHPCorrect08.xls 115 KB
16. Aba-Ref-Feed.xlsx 9 KB
17. ADG-003B-design-model-estimation-common-factor.xls 1 203 KB
18. AEROMIX+2000A.xlt 561 KB
19. Agitator.xls 43 KB
20. Air Flow Calculations.xls 16 KB
21. ALL_Purpose_worksheet_.xls 863 KB
22. ALL_Purpose_worksheet__Conversions_.xls 863 KB
23. ANSI Standard Pipe Table.xls 37 KB
24. API 650 TANK NOZZLE STAND OUT.xls 281 KB
25. Api 650 Welded Steel Tanks For Oil Storage Inquiries.xls 161 KB
26. API sizing calculations WebSite.xls 42 KB
27. API520_RVsizing.xlsm 60 KB
28. ASME_pressure_vessel_design-A.xls 389 KB
29. Attachment (Upheaval Buckling).xls 162 KB
30. BESSEL.XLS 21 KB
31. Binary_VLE.xls 483 KB
32. Blind Flange Design Calculations - by Abdel Halim Galala .pdf 62 KB
33. Boundary Layer Calculator-EVBSPBLC.XLS 344 KB
34. bvle.xls 30 KB
35. Bypass-calculation-R3.xls 25 KB
36. calc volume.xls 74 KB
37. Calculate annular capacity between casing or hole and drill pipe, tubing, or casing.xls 17 KB
38. Calculate AOF From Backpressure Plot Using C And n.xls 52 KB
39. Calculate AOF From Backpressure Plot Using LIT.xls 60 KB
40. Calculate Gas Compressibility.xls 64 KB
41. Calculate Gas Rate Using Choke Equation Schlumberger Model.xls 238 KB
42. Calculate Gas Rate Using Choke Equation Texas A & I Model.xls 41 KB
43. Calculate Gas Viscosity.xls 68 KB
44. Calculate Pseudocritical Pressure and Temperature.xls 41 KB
45. Calculate Reynolds Number.xls 85 KB
46. Calculation of Density of a Gas with the Ideal Gas Law_US units.xls 97 KB
47. Calculation of flow rate for Orifice Venturi or Flow Nozzle Meter_US units.xls 97 KB
48. Calculation of Septic Tank & Sock Pit.xls 53 KB
49. Calculation of Storage Tanks.xls 67 KB
50. Calculo NPSH.xls 23 KB
51. CALIBTK.XLS 73 KB
52. Canales.xls 78 KB
53. CAPCOST ver 2.XLS 1 396 KB
54. Casing & Drill PIPE DATA.xls 20 KB
55. CATENARY.XLS 15 KB
56. Chem179gases.xls 73 KB
57. ChemSep FRI 1982.xls 117 KB
58. Chock Formula.xls 18 KB
59. Cla-Val_Calculator.xls 81 KB
60. Colebrook-White Solution.xlsm 465 KB
61. column_diameter_and_hetp_check.xls 243 KB
62. column_diameter_hetp_check.xls 243 KB
63. Comparison - AOF Backpressure C & n vs LIT.xls 101 KB
64. Comparison - Choke Equation Schlumberger vs. Texas A & I Models.xls 515 KB
65. COMPRESS.XLS 25 KB
66. compressibility_factor_z_calc.xls 29 KB
67. compressible cake constant pressure profile.xls 47 KB
68. compressible cake constant pressure.xls 103 KB
69. compressible cake constant rate.xls 50 KB
70. Compressible.xls 217 KB
71. CompressibleFlows.xls 488 KB
72. Compressor Air Piping Calculation.xlsx 16 KB
73. Compressor BHP per MMcfd1.xls 29 KB
74. compressor sizing cal.xls 69 KB
75. compressor_drive_engine_power_calculator.xls 19 KB
76. Compressor_Power_Estimation_Calcs.xls 23 KB
77. Condensate Line Sizing.xls 19 KB
78. condensate_line_sizing (2).xls 25 KB
79. condensate_line_sizing.xls 19 KB
80. Condenser Excel Carh.xls 29 KB
81. CONE.XLS 14 KB
82. constant pressure filtration.xls 21 KB
83. Control_Valve_Data_Sheet.xls 91 KB
84. Convert C6+ to C7+ with PVTsim.xls 20 KB
85. Convert Daily Production Data To Monthly or Yearly.xls 2 817 KB
86. cooling_tower_6MW.xls 204 KB
87. Costing Distillation Columns.xls 356 KB
88. CostProgress1.1.xls 2 367 KB
89. cost_estimation.xls 90 KB
90. cost_pipe_friction_loss.xls 46 KB
91. cpelements.xls 41 KB
92. Crane Fluid Flow Problems.xls 2 567 KB
93. CRF250-Shim-Calc.xls 24 KB
94. Crossing Calculation API RP1102 (TEMPLATE).xls 123 KB
95. CVCALCS.XLS 35 KB
96. cyclone.xls 78 KB
97. data.xls 181 KB
98. Databank.xla 292 KB
99. DCs of Water tank platform.xls 111 KB
100. density change.xls 24 KB
101. density change2.xls 24 KB
102. design Manual program vr.1.5.xls 5 084 KB
103. Design of column(ultimate).xls 29 KB
104. Design of Flanges Tongue Groove Type.xls 76 KB
105. Design of New Wastewater Treatment Plant.xls 1 129 KB
106. Design of Pressure vessel New.xls 376 KB
107. Design-of-pressure-plastic-pipe.xls 44 KB
108. Design_Guide_Side_Entering_Propellers_Large_Tanks. xls 113 KB
109. Dewpoint.XLS 394 KB
110. DigitaliseChart.xls 109 KB
111. DIPPR_Thermophysical_Properties_Rev1.xlsx 94 KB
112. distillation_theoretical_stages_calculator.xls 7 341 KB
113. documentation.pdf 526 KB
114. DPT.XLS 14 KB
115. Drenajes-EXCEL.xls 131 KB
116. Drilling Pipe Cost-comcom-mppipelinecostingspreadsheet.xls 151 KB
117. drum volume.xls 62 KB
118. Drum_Vertical Wire Mesh Mist Eliminator.xls 169 KB
119. Duathlon simulated replay.xls 177 KB
120. Duct calculation Feet.xls 195 KB
121. Duct Calculation MM.xls 321 KB
122. DuctCostCalc04.xls 65 KB
123. E-Ductulator09.xls 296 KB
124. E-PipeAlator08.xls 395 KB
125. economics.xls 60 KB
126. EjemploSolver.xls 40 KB
127. EMISS.xls 49 KB
128. Engineering units converter.xls 74 KB
129. Engineering_Art__Rev1(1).XLS 442 KB
130. EOSCalcs.xls 78 KB
131. EOS_Property_Calculation.xls 253 KB
132. epa_aer_2006.xls 381 KB
133. Equipment_Drawings.xls 128 KB
134. equivalentLengthMethod.xls 13 KB
135. Escnew14.doc 16 KB
136. esp_PVT Properties.xls 370 KB
137. Example53.xls 43 KB
138. Excel fomulae & tricks.xls 55 KB
139. Excel template_ Heat Exchanger Design_p1__SI_units.xls 24 KB
140. Excel template_Double Pipe Heat Exchanger Design_p1and2__SI_units.xls 24 KB
141. Excel template_Shell and Tube Heat Exchanger Design_p1and2__SI_units.xls 24 KB
142. excessair.xls 24 KB
143. EXDUCT.XLS 245 KB
144. Experienced Based Rules of Chemical Engineering.xls 143 KB
145. exprules.xls 194 KB
146. FanPumpCalc10.xls 25 KB
147. Fire PSV_Gas&Liq.xls 76 KB
148. Fire PSV_R0 .xls 154 KB
149. Flare Radiation.xls 381 KB
150. Flare Stack Calculations.xls 43 KB
151. flareeventdataform.xls 611 KB
152. Flares Calculations.xls 108 KB
153. FLOWCAL5.XLS 99 KB
154. flowmeter_selection.xls 706 KB
155. FluadNET_Ejem1.xls 891 KB
156. FLUMLVL.XLS 16 KB
157. formulas_spreadsheet.xls 1 346 KB
158. Fuel -Table6_05.xls 17 KB
159. Fuel consumption estimate.xls 92 KB
160. Fuel-Use-Calculator_June22_09.xls 30 KB
161. fuel-value-calculator.xls 56 KB
162. Fuel_Use_for_Home_Calculator.xls 26 KB
163. Gas Compressor's Power Calculation_WS.xls 573 KB
164. Gas Turbine Estimator 2 0.xls 1 618 KB
165. GASPROPS.XLS 32 KB
166. Gassim6B.xls 1 936 KB
167. GasVelocityCalculator.xls 314 KB
168. Gas_Linesizing_Rev1.xls 250 KB
169. gear_pump_design_sheet.xls 31 KB
170. GEMI-Equations-Tool.xls 55 KB
171. Ggeothermal Closed Loop Pressure Drop.xls 209 KB
172. Glycol-Calculation-Sheet.xls 23 KB
173. GTF.xlsx 44 KB
174. H2S conversion calc.xls 16 KB
175. HAT Horiz Vessel Vol.xls 75 KB
176. HDD Calculation (template).xls 75 KB
177. Head Loss Calculation PE Pipe.xls 23 KB
178. header & Piping sizing.xls 448 KB
179. heat ex calc(2).xls 23 KB
180. heat ex calc.xls 23 KB
181. heat exam.xls 21 KB
182. Heat&CoolCost7-10.xls 68 KB
183. heatcalc.xls 117 KB
184. HeatTransferCoefficient&PressureDropCalculator.xls 41 KB
185. henry.xls 46 KB
186. Hours_worked_Template.xls 150 KB
187. How a 3-Phase Separator Works.xlsx 141 KB
188. HP Energy Calc.xls 14 KB
189. HVAC Heat load of a room.xls 40 KB
190. HVACPowDen08a.xls 2 397 KB
191. Hydro-Calc-web.xls 31 KB
192. icesm.xls 2 367 KB
193. Incident Master.xls 68 KB
194. insulation.xls 20 KB
195. ISA_Symbols(1).xls 144 KB
196. Isentropic Relations.xls 69 KB
197. karman_dp.xls 66 KB
198. KOD Sizing.xls 278 KB
199. Laboratory 2 - Nozzle Flow.xls 353 KB
200. LHV.XLS 95 KB
201. Line List template.xls 81 KB
202. LINE SIZE & PRESSURE DROP CALCULATION.xls 347 KB
203. LinearCvEst.xls 34 KB
204. LiqPipe.xls 777 KB
205. Liquid_Linesizing_Rev1A.xls 240 KB
206. LIQVIS.EXE 61 KB
207. LNG_Yields.xls 60 KB
208. LompocCostEstForm2009-2010.xls 172 KB
209. Loop_Volume_Calculator.xls 48 KB
210. Material Balance Calculations (for We and m).xls 90 KB
211. Mccabe.xls 142 KB
212. mercer_valve_pilot_sizing_v5.1.xls 607 KB
213. mercer_valve_spring_op_sizing_v4.99.xls 563 KB
214. MetalSkinTemperature.xls 175 KB
215. modeling14.xls 32 KB
216. Monthly Production Data for Entire Well List - Oct 1207.xls 2 666 KB
217. Multi_Component_Flash.xls 355 KB
218. N2 Physical Properties.xls 73 KB
219. nar analysis new.xls 40 KB
220. Net_Biphase.XLS 115 KB
221. Net_Flare.xls 1 037 KB
222. Net_GasPipe.xls 986 KB
223. Net_LiqPipe.xls 782 KB
224. new heat exchaner design_5mw(2).xls 299 KB
225. new heat exchaner design_5mw.xls 299 KB
226. nganal.xls 103 KB
227. Nominal_Design_22_01_08.xls 1 907 KB
228. Nozzle Design.xls 285 KB
229. NPSH Calculation.xls 118 KB
230. NPSH CALCULATIONS FOR RECIPROCATING PUMP.doc 24 KB
231. NPSH Calculations.xls 22 KB
232. npshcal culator for process engineer.xls 136 KB
233. NPV IRR IOCOFC.xlsx 1 227 KB
234. Oil_Gas Volumetrics.xls 119 KB
235. oil_table_of_world_oil_production_barrels_2009.xls 63 KB
236. Oneeq19b.xls 25 KB
237. Orifice (2).xls 76 KB
238. Orifice Caclulation.xls 52 KB
239. orifice calc_vapor_steam_gases.xls 22 KB
240. Orifice-Gas Orifice Factor Calculation Based on ISO 5167(rev01).xls 48 KB
241. Orifice-Liquid Orifice Factor Calculation Based on ISO 5167(rev01).xls 51 KB
242. ORIFICE.XLS 20 KB
243. P-zcalc.xls 212 KB
244. P1-1a.xls 14 KB
245. Packed Bed Pressure Drop vs. Char Size v3.xls 86 KB
246. PACKED.XLS 37 KB
247. Periodic Table V1.0.xls 74 KB
248. Phase Transition Dynamics, Onuki A, CUP 2002.pdf 11 670 KB
249. Physical Chemical Properties of Some Substance.xls 181 KB
250. Physical Properties of Sulfur Dioxide.xls 73 KB
251. pip2_wpd_calc.xls 36 KB
252. PIPE ARAMCO.xls 29 KB
253. Pipe Distribuidores.xls 346 KB
254. Pipe friction loss - water.xls 32 KB
255. Pipe Size Optimization for Stainless Steel Pipes.xls 43 KB
256. pipe span chart.xls 72 KB
257. pipe.exe 204 KB
258. PIPES & FLANGES(95).xls 829 KB
259. Pipes Class Material.xls 623 KB
260. pipes.xls 43 KB
261. pipesize.xls 3 386 KB
262. PipeSizer.exe 448 KB
263. Pipe_Sizing_Data.xls 39 KB
264. Piping Data_english.xls 1 645 KB
265. Piping Data_metric.xls 3 352 KB
266. piping_design_info (2).xls 3 352 KB
267. piping_design_info.xls 4 072 KB
268. piping_design_infor.xls 3 352 KB
269. PLATE.XLS 14 KB
270. power law equation.xls 19 KB
271. Preliminary evaporator design and selection Rev2.xls 155 KB
272. Pressure Drop Calculations for Power Law Fluids.xlsx 37 KB
273. Pressure Drop Karman Method.xls 66 KB
274. Pressure Drop Spread Sheet..xls 145 KB
275. Pressure drop thru VIP.xls 17 KB
276. pressure leaf clarification costing.xls 25 KB
277. PRESSURE OF REAL GASES.xls 55 KB
278. pressure-vessel-vba-excel97.xlt 182 KB
279. PressureDropLiquidLineVerhappen.xls 22 KB
280. PressureDropVelocity.xls 65 KB
281. Pressure_Drop.xls 224 KB
282. pressure_drop_calculator.xls 52 KB
283. psv sizing .xls 163 KB
284. PSV-Fire.xls 26 KB
285. PSV-GAS&VAPOR.xlsx 14 KB
286. PsychProcess09.xls 136 KB
287. Psychro.xls 112 KB
288. psychrometric chart Eng.swf 370 KB
289. psychrometric chart SI.swf 307 KB
290. PTABLE.EXE 285 KB
291. Pump (2).xls 78 KB
292. Pump Designs.xls 37 KB
293. pump formulas 2.xls 54 KB
294. pump formulas 4.XLS 147 KB
295. pump formulas.xls 86 KB
296. Pump Room.xls 31 KB
297. Pump Specific Speed and Inertia Estimate.xls 71 KB
298. Pump Spreadsheet.xls 66 KB
299. Pump Static Head.xls 245 KB
300. Pump's Quick Approximation Calculator for Power & Nss.xls 1 970 KB
301. Pump- AFO1490.xls 74 KB
302. Pump- impload.xlt 59 KB
303. Pump.xls 82 KB
304. PumpCalibrationCircularWetWell.xls 471 KB
305. PumpCalibrationRectangularWetWell.xls 471 KB
306. PUMPCURV.XLS 16 KB
307. Pumphyddesignwksht4-17-07.xls 19 KB
308. pumpselect1.0.xls 254 KB
309. pump_calc.xlsx 166 KB
310. pump_curves.xls 27 KB
311. pump_seal_plan.xls 105 KB
312. Pump_selection_chart.xls 31 KB
313. Pump_Sizing_Rev1A.xls 121 KB
314. Rate statement water tank VCKPS.xls 102 KB
315. Reactor Particle Sizing.xls 22 KB
316. reactor_particle_size.xls 22 KB
317. real_gas.xls 30 KB
318. Rectangular Tank.xls 27 KB
319. Refrigerated Cold Storage Design.xls 28 KB
320. Relief_Valve__version_1_.xls 5 348 KB
321. ResLoad08.xls 475 KB
322. rotary vacuum filter.xls 24 KB
323. Rules of Thumb - Chemical Engineering.xls 135 KB
324. Rules of Thumb-Chemical Engineering.xls 135 KB
325. RunningCostYourPump.xls 18 KB
326. SAFE Chart template.xls 154 KB
327. Scrubber Design.xls 694 KB
328. scrubber_design.xls 694 KB
329. Senior Design Equipment Design Spec Sheet.xls 2 237 KB
330. Sep Sizing-Mostafa.xls 32 KB
331. Sep Sizing2.xls 24 KB
332. SEPARATOR (2).EXE 536 KB
333. Separator Sizing S1-Sarajeh.xls 59 KB
334. Separator Sizing.xls 59 KB
335. Separator-calculations.xls 80 KB
336. Separator.exe 1 260 KB
337. Separator.xls 1 122 KB
338. Septic Tank_Design Program_RAS2021_Updated_10.8.2009.xls 340 KB
339. series parallel.xls 135 KB
340. SHELL AND TUBE HEAT EXCHANGER SPREADSHEET.xls 25 KB
341. Sieved samples and notes.xls 23 KB
342. SimpleCompressorSizing.xls 288 KB
343. SimplePipelineSizing.xls 329 KB
344. single_two_phase_dp_calc.xlsm 37 KB
345. SIZE THE AIR RECEIVER.XLS 44 KB
346. Sizing of Separator.xls 31 KB
347. solub.xls 28 KB
348. specific surface area.xls 23 KB
349. srk.xls 55 KB
350. Static calculation example.xls 61 KB
351. STATIC PRESSURE CALCULATOR.XLS 759 KB
352. Steam Leak Calculation.xls 34 KB
353. Steam Tracing.xls 699 KB
354. steamtab.xla 195 KB
355. Steam_Linesizing_Rev_1.xls 579 KB
356. Steam_Tables.xls 546 KB
357. steam_tracing.xls 699 KB
358. steam_tracing_excel_2007.xls 721 KB
359. Steel_Pipe_Vessel.xls 2 437 KB
360. Steel_Pipe_Vessel1.xls 2 325 KB
361. Storage Tank - Normal Venting Capacity Calculations.pdf 22 KB
362. Straightening Vane Pressure Drop Table 23KB.xls 23 KB
363. Student_Heat_of_Vaporization_Data.xls 19 KB
364. Subcolectores de Flare.xls 181 KB
365. Sulfur Tank Heat Loss02.xls 403 KB
366. sum_win wells 3,8 (schulumbereger) 10 mmscfd phase.xls 82 KB
367. Table for Sieve Data.xls 44 KB
368. TableforSieveData.xls 39 KB
369. Tank Pressure and Vacuum Protection spreadsheet.xls 24 KB
370. TANK VOL.xls 343 KB
371. Tank Volumes(1).xls 581 KB
372. Tank Volumes.xls 269 KB
373. TANK.xls 18 KB
374. TankVolumes.xls 103 KB
375. Test gas calculation.xls 24 KB
376. The Ragknot solutons for Colebrook Equations.xlsm 53 KB
377. Thickness.xls 685 KB
378. thickness_and_weld_branch_calc_to_ASME_B31_3.xls 2 958 KB
379. THK.CALC. FOR PIPE.xls 123 KB
380. Thumb Rules for Chemical Engineer.xls 116 KB
381. TideLoad10v1.xls 1 139 KB
382. TIGPA2000.xls 4 186 KB
383. Toluene_HDA.xls 2 281 KB
384. tower pricing.xla 356 KB
385. tower pricing.xls 356 KB
386. turbocalcs.xls 37 KB
387. Two Phase Flow.xls 120 KB
388. Two Phase Separator with Submeged Weir Oil.XLS 329 KB
389. twophase.xls 120 KB
390. TW_Design_Spreadsheet_XLS_22123.xls 273 KB
391. TW_Design_Spreadsheet_XLS_22123_2.xls 273 KB
392. TXTR2002.xls 2 358 KB
393. Under Re_Attachment (Elastic Bend).xls 110 KB
394. Unit100ControlValvesBook4.xls 711 KB
395. Unit100ControlValvesBookG.xls 1 097 KB
396. UnitsNomograph.xls 926 KB
397. Useful Piping & Structural Data.xls 1 645 KB
398. Validaci&#243;n.xls 829 KB
399. Valve Cv & Pipe Flow Data.xls 81 KB
400. Valve Opning vs CV.xls 21 KB
401. ValveSizingProgram_000.xls 38 KB
402. Valve_CFM_SCFM_Calc.xls 48 KB
403. valve_cv_sizing_liquids_gases.xls 178 KB
404. vanDer.xls 153 KB
405. Vapor Pressure Antoine Eq..xls 204 KB
406. Vapor Pressure of a Liquid Solution.xls 523 KB
407. Vapor_Liquid_Vertical_Separator.xls 191 KB
408. vapor_pressure.xls 204 KB
409. Varios para Excel.htm 4 KB
410. Velocity of Sound.xls 34 KB
411. Vertederos.xls 34 KB
412. Vertical_Knock_Out_Drum_With_Wire_Mesh For N.GAS.xls 57 KB
413. Vessel Volumes.xls 1 048 KB
414. Vessel_Sizing_Volume.xls 132 KB
415. viscosity_astm_D341.xls 207 KB
416. Vlave checksize.xls 774 KB
417. vlvsize.xls 30 KB
418. Volumes & Weights.xls 21 KB
419. Volumetric Calculations (Rev1 - Steve's Contour Map).xls 27 KB
420. vpmixtures (2).xls 510 KB
421. vpmixtures.xls 523 KB
422. W-AHPCorrect04.xls 88 KB
423. Wall Thickness Calculation - ASME B31.8 2007 (Template).xls 68 KB
424. WALL THK CALCULATION ASME B31.4.xls 218 KB
425. water.exe 48 KB
426. water97_v12.rtf 45 KB
427. water97_v12.xla 141 KB
428. WaterTreatmentCalculator.xls 302 KB
429. WEBDROPSIZE.xls 117 KB
430. WEIR.XLS 12 KB
431. well log.xls 99 KB
432. Wind Load Calculation for Vessel.xls 21 KB
433. Z - Peng Robinson.xls 26 KB
434. Z - Redlich Kwong Barxuk.xls 28 KB
435. Z - Redlich Kwong.xls 26 KB
436. Z - Soave Redlich Kwong.xls 25 KB
437. Z Real Gas Natural.xls 103 KB
438. _TOTAL CONDENSER ETHANOLDC_.xls 29 KB




--

[Murali Krishnan]

Thanks for the excellent contribution.

[thiyaguspk]

the links are not active..kindly update it pls..

[sammy12345]

Hi Motaleby,
I am new to eclipse and I am doing a study in CO2 EOR, I have one question and it is related to the economic analysis for the CO2 EOR, I have all the values from my results of CO2 EOR, but I am just finding it difficult to do an economic analysis. I got all the values for the operation and maintenance costs involved from the research papers and I also have the incremental oil produced from my simulation, which is 1.22 million tonnes oil from EOR alone, this turns out generate a revenue of $104,365,620 when I assume a price of 485/tonne of oil.
I just need to make an economic model now, I do have to prove that these O&M costs will not exceed the revenue generated from the CO2 EOR.

I will be highly obliged if you have a dummy model, may be in excel, through which I can get an understanding of this.
regards
Azeem

[sammy12345]

Hi,
I am new to eclipse and I am doing a study in CO2 EOR, I have one question and it is related to the economic analysis for the CO2 EOR, I have all the values from my results of CO2 EOR, but I am just finding it difficult to do an economic analysis. I got all the values for the operation and maintenance costs involved from the research papers and I also have the incremental oil produced from my simulation, which is 1.22 million tonnes oil from EOR alone, this turns out generate a revenue of $104,365,620 when I assume a price of 485/tonne of oil.
I just need to make an economic model now, I do have to prove that these O&M costs will not exceed the revenue generated from the CO2 EOR.

I will be highly obliged if you have a dummy model, may be in excel, through which I can get an understanding of this.
regards
Azeem

[purav]

plenty of thanks to u sir!!

[Maheen Ahmed]

thanks for sharing so precious technical data. i cant access the link of this data being an un-active member. please help me out to access this data so that i can utilize it.

Thanks in advance for you cooperation. waiting for your rely.

Regards,
Maheen Ahmed

[ajayd]

Hi..

I am getting following error while i try to download it.

Regards.

[motaleby]

--

Download Links

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

[link Point to another website Only the registered members can access]

--

[Arunachalam K]

Thank u very much Motelby....

[linus]

Thanks a lot