ISO Collection 122/300:ISO/TC 60 - Gears

[B]Standards and projects under the direct responsibility of ISO/TC 60 Secretariat[/B]
ISO 53:1998 Cylindrical gears for general and heavy engineering -- Standard basic rack tooth profile
ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering -- Modules
ISO 677:1976 Straight bevel gears for general engineering and heavy engineering -- Basic rack
ISO 678:1976 Straight bevel gears for general engineering and heavy engineering -- Modules and diametral pitches
ISO 1328-1:2013 Cylindrical gears -- ISO system of flank tolerance classification -- Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
ISO 1328-2:1997 Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
ISO 8579-1:2002 Acceptance code for gear units -- Part 1: Test code for airborne sound
ISO/TR 10064-1:1992 Code of inspection practice -- Part 1: Inspection of corresponding flanks of gear teeth
ISO/TR 10064-1:1992/Cor 1:2006 Code of inspection practice -- Part 1: Inspection of corresponding flanks of gear teeth
ISO/TR 10064-2:1996 Code of inspection practice -- Part 2: Inspection related to radial composite deviations* runout* tooth thickness and backlash
ISO/TR 10064-2:1996/Cor 1:2001 Code of inspection practice -- Part 2: Inspection related to radial composite deviations* runout* tooth thickness and backlash
ISO/TR 10064-2:1996/Cor 2:2006 Code of inspection practice -- Part 2: Inspection related to radial composite deviations* runout* tooth thickness and backlash
ISO/TR 10064-3:1996 Code of inspection practice -- Part 3: Recommendations relative to gear blanks* shaft centre distance and parallelism of axes
ISO/TR 10064-3:1996/Cor 1:2006 Code of inspection practice -- Part 3: Recommendations relative to gear blanks* shaft centre distance and parallelism of axes
ISO/TR 10064-4:1998 Code of inspection practice -- Part 4: Recommendations relative to surface texture and tooth contact pattern checking
ISO/TR 10064-4:1998/Cor 1:2006 Code of inspection practice -- Part 4: Recommendations relative to surface texture and tooth contact pattern checking
ISO/TR 10064-5:2005 Code of inspection practice -- Part 5: Recommendations relative to evaluation of gear measuring instruments
ISO/TR 10064-5:2005/Cor 1:2006 Code of inspection practice -- Part 5: Recommendations relative to evaluation of gear measuring instruments
ISO/TR 10064-6:2009 Code of inspection practice -- Part 6: Bevel gear measurement methods
ISO 17485:2006 Bevel gears -- ISO system of accuracy
ISO 18653:2003 Gears -- Evaluation of instruments for the measurement of individual gears
IEC 61400-4:2012 Wind turbines -- Part 4: Design requirements for wind turbine gearboxes

[B]Nomenclature and wormgearing[/B]
ISO 701:1998 International gear notation -- Symbols for geometrical data
ISO 1122-1:1998 Vocabulary of gear terms -- Part 1: Definitions related to geometry
ISO 1122-1:1998/Cor 1:1999 Vocabulary of gear terms -- Part 1: Definitions related to geometry
ISO 1122-1:1998/Cor 2:2009 Vocabulary of gear terms -- Part 1: Definitions related to geometry
ISO 1122-2:1999 Vocabulary of gear terms -- Part 2: Definitions related to worm gear geometry
ISO 2490:2007 Solid (monobloc) gear hobs with tenon drive or axial keyway* 0*5 to 40 module -- Nominal dimensions
ISO 4468:2009 Gear hobs -- Accuracy requirements
ISO 4468:2009/Cor 1:2009 Gear hobs -- Accuracy requirements
ISO 10825:1995 Gears -- Wear and damage to gear teeth -- Terminology
ISO/TR 10828:2015 Worm gears -- Worm profiles and gear mesh geometry
ISO/TR 14521:2010 Gears -- Calculation of load capacity of wormgears
ISO 21771:2007 Gears -- Cylindrical involute gears and gear pairs -- Concepts and geometry

[B]Gear capacity calculation[/B]
ISO 6336-1:2006 Calculation of load capacity of spur and helical gears -- Part 1: Basic principles* introduction and general influence factors
ISO 6336-1:2006/Cor 1:2008 Calculation of load capacity of spur and helical gears -- Part 1: Basic principles* introduction and general influence factors
ISO 6336-2:2006 Calculation of load capacity of spur and helical gears -- Part 2: Calculation of surface durability (pitting)
ISO 6336-2:2006/Cor 1:2008 Calculation of load capacity of spur and helical gears -- Part 2: Calculation of surface durability (pitting)
ISO 6336-3:2006 Calculation of load capacity of spur and helical gears -- Part 3: Calculation of tooth bending strength
ISO 6336-3:2006/Cor 1:2008 Calculation of load capacity of spur and helical gears -- Part 3: Calculation of tooth bending strength
ISO 6336-5:2016 Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials
ISO 6336-6:2006 Calculation of load capacity of spur and helical gears -- Part 6: Calculation of service life under variable load
ISO 6336-6:2006/Cor 1:2007 Calculation of load capacity of spur and helical gears -- Part 6: Calculation of service life under variable load
ISO 9083:2001 Calculation of load capacity of spur and helical gears -- Application to marine gears
ISO 9085:2002 Calculation of load capacity of spur and helical gears -- Application for industrial gears
ISO 10300-1:2014 Calculation of load capacity of bevel gears -- Part 1: Introduction and general influence factors
ISO 10300-2:2014 Calculation of load capacity of bevel gears -- Part 2: Calculation of surface durability (pitting)
ISO 10300-3:2014 Calculation of load capacity of bevel gears -- Part 3: Calculation of tooth root strength
ISO 13691:2001 Petroleum and natural gas industries -- High-speed special-purpose gear units
ISO 14104:2014 Gears -- Surface temper etch inspection after grinding* chemical method
ISO/TR 14179-1:2001 Gears -- Thermal capacity -- Part 1: Rating gear drives with thermal equilibrium at 95 °C sump temperature
ISO/TR 14179-2:2001 Gears -- Thermal capacity -- Part 2: Thermal load-carrying capacity
ISO 14635-1:2000 Gears -- FZG test procedures -- Part 1: FZG test method A/8*3/90 for relative scuffing load-carrying capacity of oils
ISO 14635-2:2004 Gears -- FZG test procedures -- Part 2: FZG step load test A10/16* 6R/120 for relative scuffing load-carrying capacity of high EP oils
ISO 14635-3:2005 Gears -- FZG test procedures -- Part 3: FZG test method A/2* 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 1: Introduction and basic principles
ISO/TR 15144-2:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 2: Examples of calculation for micropitting
ISO/TR 18792:2008 Lubrication of industrial gear drives
ISO/TR 22849:2011 Design recommendations for bevel gears
ISO 23509:2016 Bevel and hypoid gear geometry


the missing are;

ISO/TR 10064-1:1992 Code of inspection practice -- Part 1: Inspection of corresponding flanks of gear teeth
ISO/TR 10064-4:1998 Code of inspection practice -- Part 4: Recommendations relative to surface texture and tooth contact pattern checking
ISO 9085:2002 Calculation of load capacity of spur and helical gears -- Application for industrial gears


links:

[url]http://www.mediafire.com/file/osfsszl218mzvnc/isogears.rar[/url]

or

[url]https://1fichier.com/?g0wxhnms2c[/url]

[ATTACH]9841[/ATTACH]

update:

ISO 9085:2002 Calculation of load capacity of spur and helical gears -- Application for industrial gears - added missing standard
ISO/TR 10064-4:1998 Code of inspection practice -- Part 4: Recommendations relative to surface texture and tooth contact pattern checking - added missing standard thanks to eden0914

the only 1 missing now is:

ISO/TR 10064-1:1992 Code of inspection practice -- Part 1: Inspection of corresponding flanks of gear teeth


new link:

[url]http://www.mediafire.com/file/5kvwp8zarblcl25/ISO_122-Gears_%2818-03-2017%29.rar[/url]

thanks

update:

missing or new or BQ or EN:

ISO/TR 10064-1:1992 Code of inspection practice -- Part 1: Inspection of corresponding flanks of gear teeth
ISO/TR 10064-4:1998 Code of inspection practice -- Part 4: Recommendations relative to surface texture and tooth contact pattern checking
ISO 10825:1995 Gears -- Wear and damage to gear teeth -- Terminology
ISO 14104:2017 Gears -- Surface temper etch inspection after grinding* chemical method
ISO/TR 14179-2:2001 Gears -- Thermal capacity -- Part 2: Thermal load-carrying capacity
ISO 23509:2016 Bevel and hypoid gear geometry


complete!

[url]http://www.mediafire.com/file/go2kvtlxdad9gcr/ISO_122-Gears_%2823-06-2017%29.rar[/url]

full list 28.12.2017.

ISO 53:1998 Cylindrical gears for general and heavy engineering -- Standard basic rack tooth profile
ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering -- Modules
ISO 677:1976 Straight bevel gears for general engineering and heavy engineering -- Basic rack
ISO 678:1976 Straight bevel gears for general engineering and heavy engineering -- Modules and diametral pitches
ISO 1328-1:2013 Cylindrical gears -- ISO system of flank tolerance classification -- Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
ISO 1328-2:1997 Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
ISO 8579-1:2002 Acceptance code for gear units -- Part 1: Test code for airborne sound
ISO/TR 10064-1:2017 Code of inspection practice -- Part 1: Measurement of cylindrical gear tooth flanks
ISO/TR 10064-2:1996 Code of inspection practice -- Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
ISO/TR 10064-2:1996/Cor 1:2001 Code of inspection practice -- Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
ISO/TR 10064-2:1996/Cor 2:2006 Code of inspection practice -- Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
ISO/TR 10064-3:1996 Code of inspection practice -- Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
ISO/TR 10064-3:1996/Cor 1:2006 Code of inspection practice -- Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
ISO/TR 10064-4:1998 Code of inspection practice -- Part 4: Recommendations relative to surface texture and tooth contact pattern checking
ISO/TR 10064-4:1998/Cor 1:2006 Code of inspection practice -- Part 4: Recommendations relative to surface texture and tooth contact pattern checking
ISO/TR 10064-5:2005 Code of inspection practice -- Part 5: Recommendations relative to evaluation of gear measuring instruments
ISO/TR 10064-5:2005/Cor 1:2006 Code of inspection practice -- Part 5: Recommendations relative to evaluation of gear measuring instruments
ISO/TR 10064-6:2009 Code of inspection practice -- Part 6: Bevel gear measurement methods
ISO 17485:2006 Bevel gears -- ISO system of accuracy
ISO 18653:2003 Gears -- Evaluation of instruments for the measurement of individual gears
IEC 61400-4:2012 Wind turbines -- Part 4: Design requirements for wind turbine gearboxes


ISO 701:1998 International gear notation -- Symbols for geometrical data
ISO 1122-1:1998 Vocabulary of gear terms -- Part 1: Definitions related to geometry
ISO 1122-1:1998/Cor 1:1999 Vocabulary of gear terms -- Part 1: Definitions related to geometry
ISO 1122-1:1998/Cor 2:2009 Vocabulary of gear terms -- Part 1: Definitions related to geometry
ISO 1122-2:1999 Vocabulary of gear terms -- Part 2: Definitions related to worm gear geometry
ISO 2490:2007 Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module -- Nominal dimensions
ISO 4468:2009 Gear hobs -- Accuracy requirements
ISO 4468:2009/Cor 1:2009 Gear hobs -- Accuracy requirements
ISO 10825:1995 Gears -- Wear and damage to gear teeth -- Terminology
ISO/TR 10828:2015 Worm gears -- Worm profiles and gear mesh geometry
ISO/TR 14521:2010 Gears -- Calculation of load capacity of wormgears
ISO 21771:2007 Gears -- Cylindrical involute gears and gear pairs -- Concepts and geometry


ISO 6336-1:2006 Calculation of load capacity of spur and helical gears -- Part 1: Basic principles, introduction and general influence factors
ISO 6336-1:2006/Cor 1:2008 Calculation of load capacity of spur and helical gears -- Part 1: Basic principles, introduction and general influence factors
ISO 6336-2:2006 Calculation of load capacity of spur and helical gears -- Part 2: Calculation of surface durability (pitting)
ISO 6336-2:2006/Cor 1:2008 Calculation of load capacity of spur and helical gears -- Part 2: Calculation of surface durability (pitting)
ISO 6336-3:2006 Calculation of load capacity of spur and helical gears -- Part 3: Calculation of tooth bending strength
ISO 6336-3:2006/Cor 1:2008 Calculation of load capacity of spur and helical gears -- Part 3: Calculation of tooth bending strength
ISO 6336-5:2016 Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials
ISO 6336-6:2006 Calculation of load capacity of spur and helical gears -- Part 6: Calculation of service life under variable load
ISO 6336-6:2006/Cor 1:2007 Calculation of load capacity of spur and helical gears -- Part 6: Calculation of service life under variable load
ISO/TS 6336-20:2017 Calculation of load capacity of spur and helical gears -- Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) -- Flash temperature method
ISO/TS 6336-21:2017 Calculation of load capacity of spur and helical gears -- Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) -- Integral temperature method
ISO/TR 6336-30:2017 Calculation of load capacity of spur and helical gears -- Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5
ISO 9083:2001 Calculation of load capacity of spur and helical gears -- Application to marine gears
ISO 9085:2002 Calculation of load capacity of spur and helical gears -- Application for industrial gears
ISO 10300-1:2014 Calculation of load capacity of bevel gears -- Part 1: Introduction and general influence factors
ISO 10300-2:2014 Calculation of load capacity of bevel gears -- Part 2: Calculation of surface durability (pitting)
ISO 10300-3:2014 Calculation of load capacity of bevel gears -- Part 3: Calculation of tooth root strength
ISO/TR 10300-30:2017 Calculation of load capacity of bevel gears -- Part 30: ISO rating system for bevel and hypoid gears -- Sample calculations
ISO 13691:2001 Petroleum and natural gas industries -- High-speed special-purpose gear units
ISO 14104:2017 Gears -- Surface temper etch inspection after grinding, chemical method
ISO/TR 14179-1:2001 Gears -- Thermal capacity -- Part 1: Rating gear drives with thermal equilibrium at 95 °C sump temperature
ISO/TR 14179-2:2001 Gears -- Thermal capacity -- Part 2: Thermal load-carrying capacity
ISO 14635-1:2000 Gears -- FZG test procedures -- Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
ISO 14635-2:2004 Gears -- FZG test procedures -- Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
ISO 14635-3:2005 Gears -- FZG test procedures -- Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 1: Introduction and basic principles
ISO/TR 15144-2:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 2: Examples of calculation for micropitting
ISO/TR 18792:2008 Lubrication of industrial gear drives
ISO/TR 22849:2011 Design recommendations for bevel gears
ISO 23509:2016 Bevel and hypoid gear geometry


the missing:

ISO/TS 6336-21:2017 Calculation of load capacity of spur and helical gears -- Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) -- Integral temperature method
ISO/TR 10300-30:2017 Calculation of load capacity of bevel gears -- Part 30: ISO rating system for bevel and hypoid gears -- Sample calculations



[url]http://www.mediafire.com/file/i8171rqj3m4xdy4/ISO_122-Gears_%2828-12-2017%29.rar[/url]