How to fix the following Eclipse 100 errors?

[size=1][size=2][size=3]@-- error at time 0.0 days ( 1-jan-1997):
@ insufficient data to compute pore volumes
@ pore volumes will be set to zero

@-- error at time 0.0 days ( 1-jan-1997):
@ insufficient data to compute cell centre depths

@-- error at time 0.0 days ( 1-jan-1997):
@ insufficient data to compute x transmissibilities

@-- error at time 0.0 days ( 1-jan-1997):
@ insufficient data to compute y transmissibilities

@-- error at time 0.0 days ( 1-jan-1997):
@ insufficient data to compute z transmissibilities

@--comment at time 0.0 days ( 1-jan-1997):[/size][/size][/size]

1) Why eclipse doesn't calculate pore volume? I have correctly provided cell porosity and its DX,DY, and DZ dimensions. But it still shows an error .

2) What is needed to calculate center depth? Does Eclipse do it automatically?

3) How transmissibility should be calculated? Do I need to do it manually?

Thanks.

1) Why eclipse doesn't calculate pore volume? I have correctly provided cell porosity and its DX,DY, and DZ dimensions. But it still shows an error .
- Did you provide NTG?, it's required for both pore vol and transmissibility calculations.
- Are you using an extremely high value of MINPV so that you are deactivating the whole model?
- Check your ACTNUM keyword to make sure you are deactivating the right cells.
Check this.

2) What is needed to calculate center depth? Does Eclipse do it automatically?
- Eclipse does this internally once input data is correctly provided.

3) How transmissibility should be calculated? Do I need to do it manually?
- Eclipse does this internally once input data is correctly provided.

Let us take a look of your *.data file to check it.

[QUOTE=DAH7542;227747]1) Why eclipse doesn't calculate pore volume? I have correctly provided cell porosity and its DX,DY, and DZ dimensions. But it still shows an error .
- Did you provide NTG?, it's required for both pore vol and transmissibility calculations.
- Are you using an extremely high value of MINPV so that you are deactivating the whole model?
- Check your ACTNUM keyword to make sure you are deactivating the right cells.
Check this.

2) What is needed to calculate center depth? Does Eclipse do it automatically?
- Eclipse does this internally once input data is correctly provided.

3) How transmissibility should be calculated? Do I need to do it manually?
- Eclipse does this internally once input data is correctly provided.

Let us take a look of your *.data file to check it.[/QUOTE]

Actually i entered pore volume, PV, as the result of porosity *DX*DY*DZ.
I have attached my input data in .txt format as Eclipse doesn't accept .data file.

I found and solved many problems in your run, not only with respect to the global grid and LGR definition but with the Schedule section. It is running without problems now.

[QUOTE=pet_spec;227748]Actually i entered pore volume, PV, as the result of porosity *DX*DY*DZ.
I have attached my input data in .txt format as Eclipse doesn't accept .data file.[/QUOTE]

Thanks mate for your help.

Actually, I would like to launch the well for 300 days and to shut it for 200 days then. How can I enter such commands?

ECLIPSE 300 use different PROPS data than does ECLIPSE 100.
Moreover, some keywords in SCHEDULE section are also added/changed when u switched to ECLIPSE 300

ECLIPSE 300 use different PROPS data than does ECLIPSE 100.
Moreover, some keywords in SCHEDULE section are also added/changed when u switched to ECLIPSE 300

[QUOTE=06pg22;227807]ECLIPSE 300 use different PROPS data than does ECLIPSE 100.
Moreover, some keywords in SCHEDULE section are also added/changed when u switched to ECLIPSE 300[/QUOTE]

Yeah ... I know. But I used Eclipse 100 only and manual for it.

[QUOTE=pet_spec;227785]Thanks mate for your help.

Actually, I would like to launch the well for 300 days and to shut it for 200 days then. How can I enter such commands?[/QUOTE]

Use the keyword WELOPEN (write it with one "L" only), refer to the ECL reference manual for more details.

Hello,

I am unable to download the above attachment. Please help.

Hello,

I am unable to download the above attachment. Please help.

Please I'm having the same problem, can anyone help me out? I'm a beginner in Eclipse.
@-- ERROR AT TIME 0.0 DAYS (10-AUG-2014):
@ INSUFFICIENT DATA TO COMPUTE PORE VOLUMES
@ PORE VOLUMES WILL BE SET TO ZERO

@-- ERROR AT TIME 0.0 DAYS (10-AUG-2014):
@ INSUFFICIENT DATA TO COMPUTE CELL CENTRE DEPTHS

@-- ERROR AT TIME 0.0 DAYS (10-AUG-2014):
@ INSUFFICIENT DATA TO COMPUTE X TRANSMISSIBILITIES

@-- ERROR AT TIME 0.0 DAYS (10-AUG-2014):
@ INSUFFICIENT DATA TO COMPUTE Y TRANSMISSIBILITIES

@-- ERROR AT TIME 0.0 DAYS (10-AUG-2014):
@ INSUFFICIENT DATA TO COMPUTE Z TRANSMISSIBILITIES

@--MESSAGE AT TIME 0.0 DAYS (10-AUG-2014):
@ NUMBER OF ACTIVE CELLS IS 0

@-- ERROR AT TIME 0.0 DAYS (10-AUG-2014):
@ THERE ARE NO ACTIVE CELLS IN THE RESERVOIR