Tutorial : How to start a running job with the OLGA GUI

Tutorial : How to start a running job with the OLGA GUI



The input system of Olga consists in six files. Input file 1 & 2 are always required while 3,4,5 & 6 are optional.
For our test, only input files 1 &2 have been taken into consideration.
File 1 (SimName.inp): General case definition: name, reference, geometry, operational conditions, output variables. With the Graphic User Interface (GUI) this file is automatically generated.
File 2 (SimName.tab): Fluids properties definition ( also called PVT file ) .You have to click on Case(1) to open your file in order to verify all your parameters.

[img]http://www.egpet.net/vb/images/imported/2008/10/olgaguigif-1.jpg[/img]


After that you can click on Keywords (2) to open the keyword window : you will be able to enter all the data needed for the case by clicking on the desired key words. For a simple case it is not necessary to go through all the keywords. Just follow step by step the procedure :

The main Keywords are usually used and completed:
- File,
- Material,
-Wall,
- Geometry/pipe,
- Node,
- Branch,
- Boundary,
- Initial conditions,
- Profile,
- Source,
- Output,
- Trend.

Click on file in the keywords window. The file window will appear.

[img]http://www.egpet.net/vb/images/imported/2008/10/filegif-1.jpg[/img]

The window let the user define its PVT file .tab.
In this case it is the tacite3.tab

Click on material in the keywords window. The material window appears :

[img]http://www.egpet.net/vb/images/imported/2008/10/materialgif-1.jpg[/img]

In this window, you can create the material that constitute your pipe (Material-1, Material-2, etc...), you enter the characteritics of the material in the Solid/Fluid Section.

Then click Next...until you come up to the WALL window...

Here, you select WALL-1 then your MATERIAL-1 and you enter the thickness value.

[img]http://www.egpet.net/vb/images/imported/2008/10/wallgif-1.jpg[/img]


Click next until you come up to GEOMETRY/PIPE window...

Wait me i will complete

Mr Derek, Would You kindly Upload OLGA2000 software in this forum



[QUOTE=Derek1;22451]Tutorial : How to start a running job with the OLGA GUI



The input system of Olga consists in six files. Input file 1 & 2 are always required while 3,4,5 & 6 are optional.
For our test, only input files 1 &2 have been taken into consideration.
File 1 (SimName.inp): General case definition: name, reference, geometry, operational conditions, output variables. With the Graphic User Interface (GUI) this file is automatically generated.
File 2 (SimName.tab): Fluids properties definition ( also called PVT file ) .You have to click on Case(1) to open your file in order to verify all your parameters.

[img]http://www.egpet.net/vb/images/imported/2008/10/olgaguigif-1.jpg[/img]


After that you can click on Keywords (2) to open the keyword window : you will be able to enter all the data needed for the case by clicking on the desired key words. For a simple case it is not necessary to go through all the keywords. Just follow step by step the procedure :[/QUOTE]

- Profile,
- Source,
- Output,
- Trend.
what the differences between theese terms??

how use Contollers in Olga, i need set the pump speed when pressure in discharge is hight than 30 bars

Hello good friend, kindly send the Olga software or the link to get it. email: [email]doneatlast1000@yahoo.com[/email]

I will really appreciate it. Thanks

good