Results 1 to 3 of 3

Thread: Article: Valve Trim Material

  1. #1

    Join Date
    Aug 2009
    Posts
    24
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Article: Valve Trim Material

    You can view the page at

    [This link Point to another website Only registered and activated users can see links.]


  • # ADS
    Spons Circuit advertisement
    Join Date
    Always
    Posts
    Many
     
  • #2

    Join Date
    Feb 2009
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Dear Hari,

    11-13% Cr steel & ASTM A105 + Stellite are not same 11-13% Cr steel trim is SS where as ASTM A105 + Stellite is CS , so SS is better than CS. I hope this will clear your doubt.

    Regards
    Rahul

  •    Sponsored Links



    -

  • #3

    Join Date
    Apr 2010
    Posts
    100
    Blog Entries
    1
    Thanks
    0
    Thanked 18 Times in 8 Posts
    Stellite valve trim is very commonly used to resist wear as it is very hard containing chromium, cobalt, tungsten, molybdenum. Principally stellite is an alloy of cobalt and chromium in which Cr is above 25% normally.

    What I think is stellite valve trim is better than 11-13% Cr material (normal F6 as hard F6 would be more harder due to nitriding) if stelliting has been done properly by the manufacturer. And I am saying this on the basis of hardness as normal Stellite 6 has a hardness of 350 HB as compared to F6 having 250 HB (without case hardening / nitriding).

    You may confirm it from the supplier also regarding long term applications with stelliting on CS.

    Regards,
    Ashfaq Anwer

    [This link Point to another website Only registered and activated users can see links.]

    Last edited by ashfaqanwer; 07-02-2010 at 06:30 PM.

    •   

    Similar Threads

    1. Valve and Piping Presentation Material
      By Abdel Halim Galala in forum Pipeline And Fluid Flow
      Replies: 15
      Last Post: 09-05-2012, 04:55 PM
    2. Replies: 1
      Last Post: 07-03-2011, 08:38 PM
    3. question about material of valve
      By javad64 in forum Pipeline And Fluid Flow
      Replies: 2
      Last Post: 05-07-2011, 07:21 AM
    4. Article: Valve Seat
      By Mohd Zurairi Abd Ghani in forum Home Articles
      Replies: 0
      Last Post: 04-29-2011, 09:55 PM
    5. Valve Trim Material
      By hakr5 in forum Materials Science &Corrosion
      Replies: 6
      Last Post: 07-01-2010, 11:33 PM

    Tags for this Thread

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •