Results 1 to 6 of 6
  1. #1

    ISO Collection 161/300:ISO TC 85-Nuclear energy* nuclear technologies* and radiologic

    ISO TC 85 STANDARDS
    ISO 361:1975 Basic ionizing radiation symbol
    ISO 12749-2:2013 Nuclear energy* nuclear technologies* and radiological protection -- Vocabulary -- Part 2: Radiological protection
    ISO 12749-3:2015 Nuclear energy* nuclear technologies* and radiological protection -- Vocabulary -- Part 3: Nuclear fuel cycle
    ISO 12749-4:2015 Nuclear energy* nuclear technologies* and radiological protection -- Vocabulary -- Part 4: Dosimetry for radiation processing
    ISO/ASTM 51026:2015 Practice for using the Fricke dosimetry system
    ISO/ASTM 51205:2017 Practice for use of a ceric-cerous sulfate dosimetry system
    ISO/ASTM 51261:2013 Practice for calibration of routine dosimetry systems for radiation processing
    ISO/ASTM 51275:2013 Practice for use of a radiochromic film dosimetry system
    ISO/ASTM 51276:2012 Practice for use of a polymethylmethacrylate dosimetry system
    ISO/ASTM 51310:2004 Practice for use of a radiochromic optical waveguide dosimetry system
    ISO/ASTM 51401:2013 Practice for use of a dichromate dosimetry system
    ISO/ASTM 51431:2005 Practice for dosimetry in electron beam and X-ray (bremsstrahlung) irradiation facilities for food processing
    ISO/ASTM 51538:2009 Practice for use of the ethanol-chlorobenzene dosimetry system
    ISO/ASTM 51539:2013 Guide for use of radiation-sensitive indicators
    ISO/ASTM 51540:2004 Practice for use of a radiochromic liquid dosimetry system
    ISO/ASTM 51607:2013 Practice for use of the alanine-EPR dosimetry system
    ISO/ASTM 51608:2015 Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 keV and 7.5 MeV
    ISO/ASTM 51631:2013 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimetery system calibrations
    ISO/ASTM 51649:2015 Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV
    ISO/ASTM 51650:2013 Practice for use of a cellulose triacetate dosimetry system
    ISO/ASTM 51702:2013 Practice for dosimetry in a gamma facility for radiation processing
    ISO/ASTM 51707:2015 Guide for estimation of measurement uncertainty in dosimetry for radiation processing
    ISO/ASTM 51818:2013 Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV
    ISO/ASTM 51900:2009 Guide for dosimetry in radiation research on food and agricultural products
    ISO/ASTM 51939:2017 Practice for blood irradiation dosimetry
    ISO/ASTM 51940:2013 Guide for dosimetry for sterile insects release programs
    ISO/ASTM 51956:2013 Practice for use of a thermoluminescence-dosimetry system (TLD system) for radiation processing
    ISO/ASTM 52116:2013 Practice for dosimetry for a self-contained dry-storage gamma irradiator
    ISO/ASTM 52303:2015 Guide for absorbed-dose mapping in radiation processing facilities
    ISO/ASTM 52628:2013 Standard practice for dosimetry in radiation processing
    ISO/ASTM 52701:2013 Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing


    Radiological protection
    ISO 2889:2010 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities
    ISO 2919:2012 Radiological protection -- Sealed radioactive sources -- General requirements and classification
    ISO 3925:2014 Unsealed radioactive substances -- Identification and documentation
    ISO 3999:2004 Radiation protection -- Apparatus for industrial gamma radiography -- Specifications for performance* design and tests
    ISO 4037-1:1996 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 1: Radiation characteristics and production methods
    ISO 4037-2:1997 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1*3 MeV and 4 MeV to 9 MeV
    ISO 4037-3:1999 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of
    ISO 4037-4:2004 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields
    ISO 6980-1:2006 Nuclear energy -- Reference beta-particle radiation -- Part 1: Methods of production
    ISO 6980-2:2004 Nuclear energy -- Reference beta-particle radiation -- Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
    ISO 6980-3:2006 Nuclear energy -- Reference beta-particle radiation -- Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence
    ISO 7212:1986 Enclosures for protection against ionizing radiation -- Lead shielding units for 50 mm and 100 mm thick walls
    ISO 7503-1:2016 Measurement of radioactivity -- Measurement and evaluation of surface contamination -- Part 1: General principles
    ISO 7503-2:2016 Measurement of radioactivity - Measurement and evaluation of surface contamination -- Part 2: Test method using wipe-test samples
    ISO 7503-3:2016 Measurement of radioactivity -- Measurement and evaluation of surface contamination -- Part 3: Apparatus calibration
    ISO 8194:1987 Radiation protection -- Clothing for protection against radioactive contamination -- Design* selection* testing and use
    ISO 8529-1:2001 Reference neutron radiations -- Part 1: Characteristics and methods of production
    ISO 8529-1:2001/Cor 1:2008 Reference neutron radiations -- Part 1: Characteristics and methods of production
    ISO 8529-2:2000 Reference neutron radiations -- Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field
    ISO 8529-3:1998 Reference neutron radiations -- Part 3: Calibration of area and personal dosimeters and determination of response as a function of energy and angle of incidence
    ISO 8690:1988 Decontamination of radioactively contaminated surfaces -- Method for testing and assessing the ease of decontamination
    ISO 8769:2016 Reference sources -- Calibration of surface contamination monitors -- Alpha-* beta- and photon emitters
    ISO 9271:1992 Decontamination of radioactively contaminated surfaces -- Testing of decontamination agents for textiles
    ISO 9404-1:1991 Enclosures for protection against ionizing radiation -- Lead shielding units for 150 mm* 200 mm and 250 mm thick walls -- Part 1: Chevron units of 150 mm and 200 mm thickness
    ISO 9978:1992 Radiation protection -- Sealed radioactive sources -- Leakage test methods
    ISO 10648-1:1997 Containment enclosures -- Part 1: Design principles
    ISO 10648-2:1994 Containment enclosures -- Part 2: Classification according to leak tightness and associated checking methods
    ISO 11665-1:2012 Measurement of radioactivity in the environment -- Air: radon-222 -- Part 1: Origins of radon and its short-lived decay products and associated measurement methods
    ISO 11665-2:2012 Measurement of radioactivity in the environment -- Air: radon-222 -- Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products
    ISO 11665-3:2012 Measurement of radioactivity in the environment -- Air: radon-222 -- Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products
    ISO 11665-4:2012 Measurement of radioactivity in the environment -- Air: radon-222 -- Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
    ISO 11665-5:2012 Measurement of radioactivity in the environment -- Air: radon-222 -- Part 5: Continuous measurement method of the activity concentration
    ISO 11665-6:2012 Measurement of radioactivity in the environment -- Air: radon-222 -- Part 6: Spot measurement method of the activity concentration
    ISO 11665-7:2012 Measurement of radioactivity in the environment -- Air: radon-222 -- Part 7: Accumulation method for estimating surface exhalation rate
    ISO 11665-8:2012 Measurement of radioactivity in the environment -- Air: radon-222 -- Part 8: Methodologies for initial and additional investigations in buildings
    ISO 11665-9:2016 Measurement of radioactivity in the environment -- Air: Radon-222 -- Part 9: Test methods for exhalation rate of building materials
    ISO 11665-11:2016 Measurement of radioactivity in the environment -- Air: radon-222 -- Part 11: Test method for soil gas with sampling at depth
    ISO 11929:2010 Determination of the characteristic limits (decision threshold* detection limit and limits of the confidence interval) for measurements of ionizing radiation -- Fundamentals and application
    ISO 11933-1:1997 Components for containment enclosures -- Part 1: Glove/bag ports* bungs for glove/bag ports* enclosure rings and interchangeable units
    ISO 11933-2:1997 Components for containment enclosures -- Part 2: Gloves* welded bags* gaiters for remote - handling tongs and for manipulators
    ISO 11933-3:1998 Components for containment enclosures -- Part 3: Transfer systems such as plain doors* airlock chambers* double door transfer systems* leaktight connections for waste drums
    ISO 11933-4:2001 Components for containment enclosures -- Part 4: Ventilation and gas-cleaning systems such as filters* traps* safety and regulation valves* control and protection devices
    ISO 11933-5:2001 Components for containment enclosures -- Part 5: Penetrations for electrical and fluid circuits
    ISO 12789-1:2008 Reference radiation fields -- Simulated workplace neutron fields -- Part 1: Characteristics and methods of production
    ISO 12789-2:2008 Reference radiation fields -- Simulated workplace neutron fields -- Part 2: Calibration fundamentals related to the basic quantities
    ISO 13304-1:2013 Radiological protection -- Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation -- Part 1: General principles
    ISO 14146:2000 Radiation protection -- Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation
    ISO 14152:2001 Neutron radiation protection shielding -- Design principles and considerations for the choice of appropriate materials
    ISO 14152:2001/Cor 1:2002 Neutron radiation protection shielding -- Design principles and considerations for the choice of appropriate materials
    ISO 15080:2001 Nuclear facilities -- Ventilation penetrations for shielded enclosures
    ISO 15382:2015 Radiological protection -- Procedures for monitoring the dose to the lens of the eye* the skin and the extremities
    ISO 15690:2013 Radiological protection -- Recommendations for dealing with discrepancies between personal dosimeter systems used in parallel
    ISO 16637:2016 Radiological protection -- Monitoring and internal dosimetry for staff members exposed to medical radionuclides as unsealed sources
    ISO 16638-1:2015 Radiological protection -- Monitoring and internal dosimetry for specific materials -- Part 1: Inhalation of uranium compounds
    ISO 16639:2017 Surveillance of the activity concentrations of airborne radioactive substances in the workplace of nuclear facilities
    ISO 16641:2014 Measurement of radioactivity in the environment -- Air -- Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors
    ISO 16645:2016 Radiological protection -- Medical electron accelerators -- Requirements and recommendations for shielding design and evaluation
    ISO 17099:2014 Radiological protection -- Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry
    ISO 17873:2004 Nuclear facilities -- Criteria for the design and operation of ventilation systems for nuclear installations other than nuclear reactors
    ISO 17874-1:2010 Remote handling devices for radioactive materials -- Part 1: General requirements
    ISO 17874-2:2004 Remote-handling devices for radioactive materials -- Part 2: Mechanical master-slave manipulators
    ISO 17874-3:2011 Remote handling devices for radioactive materials -- Part 3: Electrical master-slave manipulators
    ISO 17874-4:2006 Remote handling devices for radioactive materials -- Part 4: Power manipulators
    ISO 17874-5:2007 Remote handling devices for radioactive materials -- Part 5: Remote handling tongs
    ISO/TS 18090-1:2015 Radiological protection -- Characteristics of reference pulsed radiation -- Part 1: Photon radiation
    ISO 18310-1:2017 Measurement and prediction of the ambient dose equivalent from patients receiving iodine 131 administration after thyroid ablation -- Part 1: During the hospitalization
    ISO 18417:2017 Iodine charcoal sorbents for nuclear facilities -- Method for defining sorption capacity index
    ISO 18589-1:2005 Measurement of radioactivity in the environment -- Soil -- Part 1: General guidelines and definitions
    ISO 18589-2:2015 Measurement of radioactivity in the environment -- Soil -- Part 2: Guidance for the selection of the sampling strategy* sampling and pre-treatment of samples
    ISO 18589-3:2015 Measurement of radioactivity in the environment -- Soil -- Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry
    ISO 18589-4:2009 Measurement of radioactivity in the environment -- Soil -- Part 4: Measurement of plutonium isotopes (plutonium 238 and plutonium 239 + 240) by alpha spectrometry
    ISO 18589-5:2009 Measurement of radioactivity in the environment -- Soil -- Part 5: Measurement of strontium 90
    ISO 18589-6:2009 Measurement of radioactivity in the environment -- Soil -- Part 6: Measurement of gross alpha and gross beta activities
    ISO 18589-7:2013 Measurement of radioactivity in the environment -- Soil -- Part 7: In situ measurement of gamma-emitting radionuclides
    ISO 19238:2014 Radiological protection -- Performance criteria for service laboratories performing biological dosimetry by cytogenetics
    ISO 19361:2017 Measurement of radioactivity -- Determination of beta emitters activities -- Test method using liquid scintillation counting
    ISO 20553:2006 Radiation protection -- Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material
    ISO 20785-1:2012 Dosimetry for exposures to cosmic radiation in civilian aircraft -- Part 1: Conceptual basis for measurements
    ISO 20785-2:2011 Dosimetry for exposures to cosmic radiation in civilian aircraft -- Part 2: Characterization of instrument response
    ISO 20785-3:2015 Dosimetry for exposures to cosmic radiation in civilian aircraft -- Part 3: Measurements at aviation altitudes
    ISO 21243:2008 Radiation protection -- Performance criteria for laboratories performing cytogenetic triage for assessment of mass casualties in radiological or nuclear emergencies -- General principles and application to dicentric assay
    ISO 21439:2009 Clinical dosimetry -- Beta radiation sources for brachytherapy
    ISO 21482:2007 Ionizing-radiation warning -- Supplementary symbol
    ISO 21909-1:2015 Passive neutron dosimetry systems -- Part 1: Performance and test requirements for personal dosimetry
    ISO 22188:2004 Monitoring for inadvertent movement and illicit trafficking of radioactive material
    ISO 26802:2010 Nuclear facilities -- Criteria for the design and the operation of containment and ventilation systems for nuclear reactors
    ISO 27048:2011 Radiation protection -- Dose assessment for the monitoring of workers for internal radiation exposure
    ISO 28057:2014 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
    ISO 28218:2010 Radiation protection -- Performance criteria for radiobioassay
    ISO 29661:2012 Reference radiation fields for radiation protection -- Definitions and fundamental concepts
    ISO 29661:2012/Amd 1:2015 Reference point of personal dosemeters

    Nuclear installations* processes and technologies
    ISO 1709:1995 Nuclear energy -- Fissile materials -- Principles of criticality safety in storing* handling and processing
    ISO 6962:2004 Nuclear energy -- Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioactive waste
    ISO 7097-1:2004 Nuclear fuel technology -- Determination of uranium in solutions* uranium hexafluoride and solids -- Part 1: Iron(II) reduction/potassium dichromate oxidation titrimetric method
    ISO 7097-2:2004 Nuclear fuel technology -- Determination of uranium in solutions* uranium hexafluoride and solids -- Part 2: Iron(II) reduction/cerium(IV) oxidation titrimetric method
    ISO 7195:2005 Nuclear energy -- Packaging of uranium hexafluoride (UF6) for transport
    ISO 7476:2003 Nuclear fuel technology -- Determination of uranium in uranyl nitrate solutions of nuclear grade quality -- Gravimetric method
    ISO 7753:1987 Nuclear energy -- Performance and testing requirements for criticality detection and alarm systems
    ISO 8298:2000 Nuclear fuel technology -- Determination of milligram amounts of plutonium in nitric acid solutions -- Potentiometric titration with potassium dichromate after oxidation by Ce(IV) and reduction by Fe(II)
    ISO 8299:2005 Nuclear fuel technology -- Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry
    ISO 8300:2013 Nuclear fuel technology -- Determination of plutonium content in plutonium dioxide of nuclear grade quality -- Gravimetric method
    ISO 8425:2013 Nuclear fuel technology -- Determination of plutonium in pure plutonium nitrate solutions -- Gravimetric method
    ISO 9005:2007 Nuclear energy -- Uranium dioxide powder and sintered pellets -- Determination of oxygen/uranium atomic ratio by the amperometric method
    ISO 9006:1994 Uranium metal and uranium dioxide powder and pellets -- Determination of nitrogen content -- Method using ammonia-sensing electrode
    ISO 9161:2004 Uranium dioxide powder -- Determination of apparent density and tap density
    ISO 9278:2008 Nuclear energy - Uranium dioxide pellets -- Determination of density and volume fraction of open and closed porosity
    ISO 9279:1992 Uranium dioxide pellets -- Determination of density and total porosity -- Mercury displacement method
    ISO 9463:2009 Nuclear energy -- Nuclear fuel technology -- Determination of plutonium in nitric acid solutions by spectrophotometry
    ISO 9889:1994 Determination of carbon content in uranium dioxide powder and sintered pellets -- Resistance furnace combustion -- Titrimetric/coulometric/infrared absorbtion method
    ISO 9891:1994 Determination of carbon content in uranium dioxide powder and sintered pellets -- High-frequency induction furnace combustion -- Titrimetric/coulometric/infrared absorption methods
    ISO 9892:1992 Uranium metal* uranium dioxide powder and pellets* and uranyl nitrate solutions -- Determination of fluorine content -- Fluoride ion selective electrode method
    ISO 9894:1996 Subsampling of uranium hexafluoride in the liquid phase
    ISO 10276:2010 Nuclear energy -- Fuel technology -- Trunnions for packages used to transport radioactive material
    ISO 10980:1995 Validation of the strength of reference solutions used for measuring concentrations
    ISO 10981:2004 Nuclear fuel technology -- Determination of uranium in reprocessing-plant dissolver solution -- Liquid chromatography method
    ISO 11311:2011 Nuclear criticality safety -- Critical values for homogeneous plutonium-uranium oxide fuel mixtures outside of reactors
    ISO 11320:2011 Nuclear criticality safety -- Emergency preparedness and response
    ISO 11482:1993 Guidelines for plutonium dioxide (PuO2) sampling in a nuclear reprocessing plant
    ISO 11483:2005 Nuclear fuel technology -- Preparation of plutonium sources and determination of 238Pu/239Pu isotope ratio by alpha spectrometry
    ISO 11599:1997 Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste
    ISO 11932:1996 Activity measurements of solid materials considered for recycling* re-use or disposal as non-radioactive waste
    ISO 12183:2016 Nuclear fuel technology -- Controlled-potential coulometric assay of plutonium
    ISO 12795:2004 Nuclear fuel technology -- Uranium dioxide powder and pellets -- Determination of uranium and oxygen/uranium ratio by gravimetric method with impurity correction
    ISO 12799:2015 Nuclear energy -- Determination of nitrogen content in UO2* (U*Gd)O2 and (U*Pu)O2 sintered pellets -- Inert gas extraction and conductivity detection method
    ISO 12800:2017 Nuclear fuel technology -- Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
    ISO 12803:1997 Representative sampling of plutonium nitrate solutions for determination of plutonium concentration
    ISO 12807:1996 Safe transport of radioactive materials -- Leakage testing on packages
    ISO 13463:1999 Nuclear-grade plutonium dioxide powder for fabrication of light water reactor MOX fuel -- Guidelines to help in the definition of a product specification
    ISO 13464:1998 Simultaneous determination of uranium and plutonium in dissolver solutions from reprocessing plants -- Combined method using K-absorption edge and X-ray fluorescence spectrometry
    ISO 13465:2009 Nuclear energy -- Nuclear fuel technology -- Determination of neptunium in nitric acid solutions by spectrophotometry
    ISO 14943:2004 Nuclear fuel technology -- Administrative criteria related to nuclear criticality safety
    ISO 15366-1:2014 Nuclear fuel technology -- Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography -- Part 1: Samples containing plutonium in the microgram ran
    ISO 15366-2:2014 Nuclear fuel technology -- Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography -- Part 2: Samples containing plutonium and uranium in the n
    ISO 15646:2014 Re-sintering test for UO2* (U*Gd)O2 and (U*Pu)O2 pellets
    ISO 15647:2004 Nuclear energy -- Isotopic analysis of uranium hexafluoride -- Double-standard gas-source mass spectrometric method
    ISO 15651:2015 Nuclear energy -- Determination of total hydrogen content in PuO2 and UO2 powders and UO2* (U*Gd)O2 and (U*Pu)O2 sintered pellets -- Inert gas extraction and conductivity detection method
    ISO 16117:2013 Nuclear criticality safety -- Estimation of the number of fissions of a postulated criticality accident
    ISO 16424:2012 Nuclear energy -- Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements
    ISO 16793:2005 Nuclear fuel technology -- Guide for ceramographic preparation of UO2 sintered pellets for microstructure examination
    ISO 16794:2003 Nuclear energy -- Determination of carbon compounds and fluorides in uranium hexafluoride infrared spectrometry
    ISO 16795:2004 Nuclear energy -- Determination of Gd2O3 content of gadolinium fuel pellets by X-ray fluorescence spectrometry
    ISO 16796:2004 Nuclear energy -- Determination of Gd2O3 content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES)
    ISO 16797:2004 Nuclear energy -- Soxhlet-mode chemical durability test -- Application to vitrified matrixes for high-level radioactive waste
    ISO 16966:2013 Nuclear energy -- Nuclear fuel technology -- Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors
    ISO 18213-1:2007 Nuclear fuel technology -- Tank calibration and volume determination for nuclear materials accountancy -- Part 1: Procedural overview
    ISO 18213-2:2007 Nuclear fuel technology -- Tank calibration and volume determination for nuclear materials accountancy -- Part 2: Data standardization for tank calibration
    ISO 18213-3:2009 Nuclear fuel technology -- Tank calibration and volume determination for nuclear materials accountancy -- Part 3: Statistical methods
    ISO 18213-4:2008 Nuclear fuel technology -- Tank calibration and volume determination for nuclear materials accountancy -- Part 4: Accurate determination of liquid height in accountancy tanks equipped with dip tubes* slow bubbling rate
    ISO 18213-5:2008 Nuclear fuel technology -- Tank calibration and volume determination for nuclear materials accountancy -- Part 5: Accurate determination of liquid height in accountancy tanks equipped with dip tubes* fast bubbling rate
    ISO 18213-6:2008 Nuclear fuel technology -- Tank calibration and volume determination for nuclear materials accountancy -- Part 6: Accurate in-tank determination of liquid density in accountancy tanks equipped with dip tubes
    ISO 19017:2015 Guidance for gamma spectrometry measurement of radioactive waste
    ISO 21238:2007 Nuclear energy -- Nuclear fuel technology -- Scaling factor method to determine the radioactivity of low- and intermediate-level radioactive waste packages generated at nuclear power plants
    ISO 21483:2013 Determination of solubility in nitric acid of plutonium in unirradiated mixed oxide fuel pellets (U* Pu) O2
    ISO 21484:2017 Nuclear Energy -- Fuel technology -- Determination of the O/M ratio in MOX pellets by the gravimetric method
    ISO 21613:2015 (U* Pu)O2 Powders and sintered pellets -- Determination of chlorine and fluorine
    ISO 21614:2008 Determination of carbon content of UO2* (U* Gd)O2 and (U* Pu)O2 powders and sintered pellets -- Combustion in a high-frequency induction furnace -- Infrared absorption spectrometry
    ISO 21847-1:2007 Nuclear fuel technology -- Alpha spectrometry -- Part 1: Determination of neptunium in uranium and its compounds
    ISO 21847-2:2007 Nuclear fuel technology -- Alpha spectrometry -- Part 2: Determination of plutonium in uranium and its compounds
    ISO 21847-3:2007 Nuclear fuel technology -- Alpha spectrometry -- Part 3: Determination of uranium 232 in uranium and its compounds
    ISO 22765:2016 Nuclear fuel technology -- Sintered (U*Pu)O2 pellets -- Guidance for ceramographic preparation for microstructure examination
    ISO 22875:2017 Nuclear energy -- Determination of chlorine and fluorine in uranium dioxide powder and sintered pellets
    ISO 26062:2010 Nuclear technology -- Nuclear fuels -- Procedures for the measurement of elemental impurities in uranium- and plutonium-based materials by inductively coupled plasma mass spectrometry
    ISO 27467:2009 Nuclear criticality safety -- Analysis of a postulated criticality accident
    ISO 27468:2011 Nuclear criticality safety -- Evaluation of systems containing PWR UOX fuels -- Bounding burnup credit approach

    Reactor technology
    ISO 6527:1982 Nuclear power plants -- Reliability data exchange -- General guidelines
    ISO 7385:1983 Nuclear power plants -- Guidelines to ensure quality of collected data on reliability
    ISO 8107:1993 Nuclear power plants -- Maintainability -- Terminology
    ISO 10645:1992 Nuclear energy -- Light water reactors -- Calculation of the decay heat power in nuclear fuels
    ISO 10979:1994 Identification of fuel assemblies for nuclear power reactors


    the missing list:
    ISO/ASTM 51310:2004 Practice for use of a radiochromic optical waveguide dosimetry system
    ISO/ASTM 51538:2009 Practice for use of the ethanol-chlorobenzene dosimetry system
    ISO/ASTM 51539:2013 Guide for use of radiation-sensitive indicators
    ISO/ASTM 51540:2004 Practice for use of a radiochromic liquid dosimetry system
    ISO/ASTM 51649:2015 Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV
    ISO 8194:1987 Radiation protection -- Clothing for protection against radioactive contamination -- Design* selection* testing and use
    ISO 8529-1:2001/Cor 1:2008 Reference neutron radiations -- Part 1: Characteristics and methods of production
    ISO 9271:1992 Decontamination of radioactively contaminated surfaces -- Testing of decontamination agents for textiles
    ISO 9404-1:1991 Enclosures for protection against ionizing radiation -- Lead shielding units for 150 mm* 200 mm and 250 mm thick walls -- Part 1: Chevron units of 150 mm and 200 mm thickness
    ISO 10648-1:1997 Containment enclosures -- Part 1: Design principles
    ISO 10648-2:1994 Containment enclosures -- Part 2: Classification according to leak tightness and associated checking methods
    ISO 11933-1:1997 Components for containment enclosures -- Part 1: Glove/bag ports* bungs for glove/bag ports* enclosure rings and interchangeable units
    ISO 11933-2:1997 Components for containment enclosures -- Part 2: Gloves* welded bags* gaiters for remote - handling tongs and for manipulators
    ISO 14152:2001/Cor 1:2002 Neutron radiation protection shielding -- Design principles and considerations for the choice of appropriate materials
    ISO 19361:2017 Measurement of radioactivity -- Determination of beta emitters activities -- Test method using liquid scintillation counting
    ISO 21909-1:2015 Passive neutron dosimetry systems -- Part 1: Performance and test requirements for personal dosimetry
    ISO 22188:2004 Monitoring for inadvertent movement and illicit trafficking of radioactive material
    ISO 9889:1994 Determination of carbon content in uranium dioxide powder and sintered pellets -- Resistance furnace combustion -- Titrimetric/coulometric/infrared absorbtion method
    ISO 9891:1994 Determination of carbon content in uranium dioxide powder and sintered pellets -- High-frequency induction furnace combustion -- Titrimetric/coulometric/infrared absorption methods
    ISO 9892:1992 Uranium metal* uranium dioxide powder and pellets* and uranyl nitrate solutions -- Determination of fluorine content -- Fluoride ion selective electrode method
    ISO 9894:1996 Subsampling of uranium hexafluoride in the liquid phase
    ISO 11482:1993 Guidelines for plutonium dioxide (PuO2) sampling in a nuclear reprocessing plant
    ISO 12803:1997 Representative sampling of plutonium nitrate solutions for determination of plutonium concentration
    ISO 13464:1998 Simultaneous determination of uranium and plutonium in dissolver solutions from reprocessing plants -- Combined method using K-absorption edge and X-ray fluorescence spectrometry
    ISO 18213-2:2007 Nuclear fuel technology -- Tank calibration and volume determination for nuclear materials accountancy -- Part 2: Data standardization for tank calibration
    ISO 22875:2017 Nuclear energy -- Determination of chlorine and fluorine in uranium dioxide powder and sintered pellets
    ISO 10645:1992 Nuclear energy -- Light water reactors -- Calculation of the decay heat power in nuclear fuels


    [link Point to another website Only the registered members can access]


    See More: ISO Collection 161/300:ISO TC 85-Nuclear energy* nuclear technologies* and radiologic

  2. # ADS
    Spons Circuit
    Join Date
    Always
    Posts
    Many
     
  3. #2

    Re: ISO Collection 161/300:ISO TC 85-Nuclear energy* nuclear technologies* and radiol

    thank you Sir* I will wait for the missings

    My threads; baran :


    •    Sponsored Links



      -

    • Re: ISO Collection 161/300:ISO TC 85-Nuclear energy* nuclear technologies* and radiol

      Quote Originally Posted by baran View Post
      thank you Sir* I will wait for the missings
      thank

    • #4

    • #5

      Re: ISO Collection 161/300:ISO TC 85-Nuclear energy* nuclear technologies* and radiol

      Thx for the hard work, appreciate it.

      My threads; CChris :


    •    Spons.


    • Re: ISO Collection 161/300:ISO TC 85-Nuclear energy* nuclear technologies* and radiol

      Hi,
      Anybody having ISO 19443:2018 ? It deals with Quality management systems — Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS)
      Many thanks in advance for the upload of standard.
      Best regards
      Hugo

      My threads; Dutillet :


      •   

      Similar Threads

      1. Replies: 8
        Last Post: 12-09-2017, 04:47 AM
      2. Replies: 0
        Last Post: 10-03-2016, 01:18 PM
      3. Sustainable and Safe Nuclear Fission Energy, G. Kessler; Springer 2012
        By dcisneros in forum Electrical & Power Engineering
        Replies: 0
        Last Post: 04-06-2014, 01:48 PM
      4. Nuclear Energy Encyclopedia; S. Krivit, Wiley 2011
        By dcisneros in forum Electrical & Power Engineering
        Replies: 0
        Last Post: 04-06-2014, 08:23 AM
      5. Nuclear Energy; R. Murray, 6 ed. 2009
        By dcisneros in forum Electrical & Power Engineering
        Replies: 0
        Last Post: 03-22-2014, 07:26 AM

      Tags for this Thread

      Bookmarks

      Posting Permissions

      • You may not post new threads
      • You may not post replies
      • You may not post attachments
      • You may not edit your posts
      •