Results 1 to 3 of 3
  1. #1

    ISO Collection 155/300:ISO TC 123-Plain Bearings

    ISO TC/123 STANDARDS
    ISO 7902-1:2013 Hydrodynamic plain journal bearings under steady-state conditions -- Circular cylindrical bearings -- Part 1: Calculation procedure
    ISO 7902-2:1998 Hydrodynamic plain journal bearings under steady-state conditions -- Circular cylindrical bearings -- Part 2: Functions used in the calculation procedure
    ISO 7902-3:1998 Hydrodynamic plain journal bearings under steady-state conditions -- Circular cylindrical bearings -- Part 3: Permissible operational parameters
    ISO 12130-1:2001 Plain bearings -- Hydrodynamic plain tilting pad thrust bearings under steady-state conditions -- Part 1: Calculation of tilting pad thrust bearings
    ISO 12130-2:2013 Plain bearings -- Hydrodynamic plain tilting pad thrust bearings under steady-state conditions -- Part 2: Functions for calculation of tilting pad thrust bearings
    ISO 12130-3:2001 Plain bearings -- Hydrodynamic plain tilting pad thrust bearings under steady-state conditions -- Part 3: Guide values for the calculation of tilting pad thrust bearings
    ISO 12131-1:2001 Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -- Part 1: Calculation of thrust pad bearings
    ISO 12131-2:2016 Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -- Part 2: Functions for the calculation of thrust pad bearings
    ISO 12131-3:2001 Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -- Part 3: Guide values for the calculation of thrust pad bearings
    ISO 12167-1:2016 Plain bearings -- Hydrostatic plain journal bearings with drainage grooves under steady-state conditions -- Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
    ISO 12167-2:2001 Plain bearings -- Hydrostatic plain journal bearings with drainage grooves under steady-state conditions -- Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves
    ISO 12168-1:2001 Plain bearings -- Hydrostatic plain journal bearings without drainage grooves under steady-state conditions -- Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves
    ISO 12168-2:2001 Plain bearings -- Hydrostatic plain journal bearings without drainage grooves under steady-state conditions -- Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves


    Materials and lubricants* their properties* characteristics* test methods and testing conditions
    ISO 4381:2011 Plain bearings -- Tin casting alloys for multilayer plain bearings
    ISO 4382-1:1991 Plain bearings -- Copper alloys -- Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings
    ISO 4382-2:1991 Plain bearings -- Copper alloys -- Part 2: Wrought copper alloys for solid plain bearings
    ISO 4383:2012 Plain bearings -- Multilayer materials for thin-walled plain bearings
    ISO 4384-1:2012 Plain bearings -- Hardness testing of bearing metals -- Part 1: Multilayer bearings materials
    ISO 4384-2:2011 Plain bearings -- Hardness testing of bearing metals -- Part 2: Solid materials
    ISO 4385:1981 Plain bearings -- Compression testing of metallic bearing materials
    ISO 4386-1:2012 Plain bearings -- Metallic multilayer plain bearings -- Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0*5 mm
    ISO 4386-2:2012 Plain bearings -- Metallic multilayer plain bearings -- Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
    ISO 4386-3:1992 Plain bearings -- Metallic multilayer plain bearings -- Part 3: Non-destructive penetrant testing
    ISO 6279:2017 Plain bearings -- Aluminium alloys for solid bearings
    ISO 6280:1981 Plain bearings -- Requirements on backings for thick-walled multilayer bearings
    ISO 6281:2007 Plain bearings -- Testing under conditions of hydrodynamic and mixed lubrication in test rigs
    ISO 6282:1983 Plain bearings -- Metallic thin-walled half bearings -- Determination of the sigma 0*01*-limit
    ISO 6691:2000 Thermoplastic polymers for plain bearings -- Classification and designation
    ISO 7146-1:2008 Plain bearings -- Appearance and characterization of damage to metallic hydrodynamic bearings -- Part 1: General
    ISO 7146-2:2008 Plain bearings -- Appearance and characterization of damage to metallic hydrodynamic bearings -- Part 2: Cavitation erosion and its countermeasures
    ISO 7148-1:2012 Plain bearings -- Testing of the tribological behaviour of bearing materials -- Part 1: Testing of bearing metals
    ISO 7148-2:2012 Plain bearings -- Testing of the tribological behaviour of bearing materials -- Part 2: Testing of polymer-based bearing materials
    ISO 7905-1:1995 Plain bearings -- Bearing fatigue -- Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication
    ISO 7905-2:1995 Plain bearings -- Bearing fatigue -- Part 2: Test with a cylindrical specimen of a metallic bearing material
    ISO 7905-3:1995 Plain bearings -- Bearing fatigue -- Part 3: Test on plain strips of a metallic multilayer bearing material
    ISO 7905-4:1995 Plain bearings -- Bearing fatigue -- Part 4: Tests on half-bearings of a metallic multilayer bearing material
    ISO 10129:2017 Plain bearings -- Testing of bearing metals -- Resistance to corrosion by lubricants under static conditions

    Dimensions* tolerances and construction details
    ISO 3547-1:2006 Plain bearings -- Wrapped bushes -- Part 1: Dimensions
    ISO 3547-2:2017 Plain bearings -- Wrapped bushes -- Part 2: Test data for outside and inside diameters
    ISO 3547-3:2017 Plain bearings -- Wrapped bushes -- Part 3: Lubrication holes* grooves and indentations
    ISO 3547-4:2017 Plain bearings -- Wrapped bushes -- Part 4: Materials
    ISO 3548-1:2014 Plain bearings -- Thin-walled half bearings with or without flange -- Part 1: Tolerances* design features and methods of test
    ISO 4379:1993 Plain bearings -- Copper alloy bushes
    ISO 6525:1983 Plain bearings -- Ring type thrust washers made from strip -- Dimensions and tolerances
    ISO 6526:1983 Plain bearings -- Pressed bimetallic half thrust washers -- Features and tolerances
    ISO 11687-1:1995 Plain bearings -- Pedestal plain bearings -- Part 1: Pillow blocks
    ISO 11687-2:1995 Plain bearings -- Pedestal plain bearings -- Part 2: Side flange bearings
    ISO 11687-3:1995 Plain bearings -- Pedestal plain bearings -- Part 3: Centre flange bearings
    ISO 12128:2001 Plain bearings -- Lubrication holes* grooves and pockets -- Dimensions* types* designation and their application to bearing bushes
    ISO 12129-1:1995 Plain bearings -- Part 1: Fits
    ISO 12129-2:1995 Plain bearings -- Part 2: Tolerances on form and position and surface roughness for shafts* flanges and thrust collars
    ISO/TR 27507:2010 Plain bearings -- Recommendations for automotive crankshaft bearing environments

    Quality analysis and assurance
    ISO 3547-5:2007 Plain bearings -- Wrapped bushes -- Part 5: Checking the outside diameter
    ISO 3547-6:2007 Plain bearings -- Wrapped bushes -- Part 6: Checking the inside diameter
    ISO 3547-7:2007 Plain bearings -- Wrapped bushes -- Part 7: Measurement of wall thickness of thin-walled bushes
    ISO 3548-2:2009 Plain bearings -- Thin-walled half bearings with or without flange -- Part 2: Measurement of wall thickness and flange thickness
    ISO 3548-3:2012 Plain bearings -- Thin-walled half bearings with or without flange -- Part 3: Measurement of peripheral length
    ISO 12132:2017 Plain bearings -- Quality assurance of thin-walled half bearings -- Design FMEA
    ISO 12301:2007 Plain bearings -- Quality control techniques and inspection of geometrical and material quality characteristics
    ISO 12302:2017 Plain bearings -- Quality characteristics -- Statistical process control (SPC)
    ISO 12303:1995 Plain bearings -- Quality characteristics -- Calculation of machine and process capabilities
    ISO 12308:2017 Plain bearings -- Quality assurance -- Sample types -- Definitions* applications and testing
    ISO 13778:2017 Plain bearings -- Quality assurance of thin-walled half bearings -- Selective assembly of bearings to achieve a narrow clearance range

    Terms and common items
    ISO 4378-1:2017 Plain bearings -- Terms* definitions* classification and symbols -- Part 1: Design* bearing materials and their properties
    ISO 4378-2:2017 Plain bearings -- Terms* definitions* classification and symbols -- Part 2: Friction and wear
    ISO 4378-3:2017 Plain bearings -- Terms* definitions* classification and symbols -- Part 3: Lubrication
    ISO 4378-4:2009 Plain bearings -- Terms* definitions* classification and symbols -- Part 4: Basic symbols
    ISO 4378-5:2009 Plain bearings -- Terms* definitions* classification and symbols -- Part 5: Application of symbols
    ISO/TR 4378-6:2012 Plain bearings -- Terms* definitions* classification and symbols -- Part 6: Abbreviated terms

    Special types of plain bearings
    ISO 2795:2014 Plain bearings -- Sintered bushes -- Dimensions and tolerances
    ISO 13939:2012 Foil bearings -- Guidelines for testing of the performance of foil journal bearings --Testing of load capacity* friction coefficient and lifetime
    ISO 14287:2012 Plain bearings -- Pad materials for tilting pad bearings
    ISO 16287:2005 Plain bearings -- Thermoplastic bushes -- Dimensions and tolerances
    ISO/TR 17606:2014 Plain bearings -- Lubrication characteristics of crosshead pin bearings for low-speed marine diesel engines
    ISO 19259:2015 Plain bearings -- Bearings with embedded solid lubricants
    ISO 20054:2016 Plain bearings -- Bearings containing dispersed solid lubricants


    the missing are;

    ISO 6282:1983 Plain bearings -- Metallic thin-walled half bearings -- Determination of the sigma 0*01*-limit
    ISO 11687-3:1995 Plain bearings -- Pedestal plain bearings -- Part 3: Centre flange bearings
    ISO 4378-1:2017 Plain bearings -- Terms* definitions* classification and symbols -- Part 1: Design* bearing materials and their properties
    ISO 4378-2:2017 Plain bearings -- Terms* definitions* classification and symbols -- Part 2: Friction and wear
    ISO 4378-3:2017 Plain bearings -- Terms* definitions* classification and symbols -- Part 3: Lubrication

    [link Point to another website Only the registered members can access]


    See More: ISO Collection 155/300:ISO TC 123-Plain Bearings

  2. # ADS
    Spons Circuit
    Join Date
    Always
    Posts
    Many
     
  3. #2

    Re: ISO Collection 155/300:ISO TC 123-Plain Bearings

    Hi, can anyone repost this.

    Much thanks

    My threads; UPSA :


    •    Sponsored Links



      -

    • #3

      Re: ISO Collection 155/300:ISO TC 123-Plain Bearings

      Hi, can anyone repost this.

      Much thanks

      My threads; UPSA :


      •   

      Similar Threads

      1. CEN standards collection 39/370: Structural Bearings - CEN TC 67
        By BornToSin in forum Mechanical Engineering
        Replies: 6
        Last Post: 11-21-2017, 11:28 PM
      2. 100 X 100 Books # 2 # 014 Bearings
        By BornToSin in forum Mechanical Engineering
        Replies: 4
        Last Post: 07-19-2017, 07:10 PM
      3. ISO Standards in plain English
        By Cecile_P in forum Quality management
        Replies: 1
        Last Post: 01-25-2015, 11:08 AM
      4. Bearings
        By Han Ah kwang in forum Mechanical Engineering
        Replies: 0
        Last Post: 01-28-2014, 03:49 PM

      Tags for this Thread

      Bookmarks

      Posting Permissions

      • You may not post new threads
      • You may not post replies
      • You may not post attachments
      • You may not edit your posts
      •