Results 1 to 7 of 7
  1. #1

    ISO Collection 101/300:ISO/TC 41 - Pulleys and belts (including veebelts)

    Friction
    ISO 22:1991 Belt drives -- Flat transmission belts and corresponding pulleys -- Dimensions and tolerances
    ISO 155:1998 Belt drives -- Pulleys -- Limiting values for adjustment of centres
    ISO 254:2011 Belt drives -- Pulleys -- Quality* finish and balance
    ISO 255:1990 Belt drives -- Pulleys for V-belts (system based on datum width) -- Geometrical inspection of grooves
    ISO 1081:2013 Belt drives -- V-belts and V-ribbed belts* and corresponding grooved pulleys -- Vocabulary
    ISO 1604:1989 Belt drives -- Endless wide V-belts for industrial speed-changers and groove profiles for corresponding pulleys
    ISO 1813:2014 Belt drives -- V-ribbed belts* joined V-belts and V-belts including wide section belts and hexagonal belts -- Electrical conductivity of antistatic belts: Characteristics and methods of test
    ISO 2790:2004 Belt drives -- V-belts for the automotive industry and corresponding pulleys -- Dimensions
    ISO 3410:1989 Agricultural machinery -- Endless variable-speed V-belts and groove sections of corresponding pulleys
    ISO 4183:1995 Belt drives -- Classical and narrow V-belts -- Grooved pulleys (system based on datum width)
    ISO 4184:1992 Belt drives -- Classical and narrow V-belts -- Lengths in datum system
    ISO 5287:2003 Belt drives -- Narrow V-belts for the automotive industry -- Fatigue test
    ISO 5289:1992 Agricultural machinery -- Endless hexagonal belts and groove sections of corresponding pulleys
    ISO 5290:2001 Belt drives -- Grooved pulleys for joined narrow V-belts -- Groove sections 9N/J* 15N/J and 25N/J (effective system)
    ISO 5291:2011 Belt drives -- Grooved pulleys for joined classical V-belts -- Groove sections AJ* BJ* CJ and DJ (effective system)
    ISO 5292:1995 Belt drives -- V-belts and V-ribbed belts -- Calculation of power ratings
    ISO 8370-1:1993 Belt drives -- Dynamic test to determine pitch zone location -- Part 1: V-belts
    ISO 8370-2:1993 Belt drives -- Dynamic test to determine pitch zone location -- Part 2: V-ribbed belts
    ISO 8419:2003 Belt drives -- Narrow V-belts -- Sections 9N/J* 15N/J and 25N/J (lengths in the effective system)
    ISO 9608:1994 V-belts -- Uniformity of belts -- Test method for determination of centre distance variation
    ISO 9980:2012 Belt drives -- Grooved pulleys for V-belts (system based on effective width) -- Geometrical inspection of grooves
    ISO 9981:1998 Belt drives -- Pulleys and V-ribbed belts for the automotive industry -- PK profile: Dimensions
    ISO 9982:1998 Belt drives -- Pulleys and V-ribbed belts for industrial applications -- PH* PJ* PK* PL and PM profiles: dimensions
    ISO 11749:2014 Belt drive -- V-ribbed belts for the automotive industry -- Fatigue test
    ISO 24035:2014 Belt drives -- V-belts and the corresponding pulleys for agricultural machineries -- Dimensions

    Conveyor belts
    ISO 251:2012 Conveyor belts with textile carcass -- Widths and lengths
    ISO 252:2007 Conveyor belts -- Adhesion between constitutive elements -- Test methods
    ISO 282:1992 Conveyor belts -- Sampling
    ISO 283:2015 Textile conveyor belts -- Full thickness tensile strength* elongation at break and elongation at the reference load -- Test method
    ISO 284:2012 Conveyor belts -- Electrical conductivity -- Specification and test method
    ISO 340:2013 Conveyor belts -- Laboratory scale flammability characteristics -- Requirements and test method
    ISO 433:1991 Conveyor belts -- Marking
    ISO 433:1991/Amd 1:2006 Conveyor belts -- Marking
    ISO 505:1999 Conveyor belts -- Method for the determination of the tear propagation resistance of textile conveyor belts
    ISO 583:2007 Conveyor belts with a textile carcass -- Total belt thickness and thickness of constitutive elements -- Test methods
    ISO 703:2007 Conveyor belts -- Transverse flexibility (troughability) -- Test method
    ISO 1120:2012 Conveyor belts -- Determination of strength of mechanical fastenings -- Static test method
    ISO 3684:1990 Conveyor belts -- Determination of minimum pulley diameters
    ISO 3684:1990/Amd 1:2006 Conveyor belts -- Determination of minimum pulley diameters
    ISO 4195:2012 Conveyor belts with heat-resistant rubber covers -- Heat resistance of covers -- Requirements and test methods
    ISO 5284:1986 Conveyor belts -- List of equivalent terms
    ISO 5284:1986/Cor 1:2005 Conveyor belts -- List of equivalent terms
    ISO 5285:2012 Conveyor belts -- Guidelines for storage and handling
    ISO 5293:2004 Conveyor belts -- Determination of minimum transition distance on three idler rollers
    ISO 5293:2004/Cor 1:2008 Conveyor belts -- Determination of minimum transition distance on three idler rollers
    ISO 7590:2009 Steel cord conveyor belts -- Methods for the determination of total thickness and cover thickness
    ISO 7622-1:2013 Steel cord conveyor belts -- Longitudinal traction test -- Part 1: Measurement of elongation
    ISO 7622-2:2015 Steel cord conveyor belts -- Longitudinal traction test -- Part 2: Measurement of tensile strength
    ISO 7623:2015 Steel cord conveyor belts -- Cord-to-coating bond test -- Initial test and after thermal treatment
    ISO 8094:2013 Steel cord conveyor belts -- Adhesion strength test of the cover to the core layer
    ISO 9856:2016 Conveyor belts -- Determination of elastic and permanent elongation and calculation of elastic modulus
    ISO 10247:1990 Conveyor belts -- Characteristics of covers -- Classification
    ISO 10247:1990/Amd 1:2006 Conveyor belts -- Characteristics of covers -- Classification
    ISO 14890:2013 Conveyor belts -- Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
    ISO 15147:2012 Light conveyor belts -- Tolerances on widths and lengths of cut light conveyor belts
    ISO 15236-1:2016 Steel cord conveyor belts -- Part 1: Design* dimensions and mechanical requirements for conveyor belts for general use
    ISO 15236-2:2004 Steel cord conveyor belts -- Part 2: Preferred belt types
    ISO 15236-3:2007 Steel cord conveyor belts -- Part 3: Special safety requirements for belts for use in underground installations
    ISO 15236-4:2004 Steel cord conveyor belts -- Part 4: Vulcanized belt joints
    ISO 16851:2012 Textile conveyor belts -- Determination of the net length of an endless (spliced) conveyor belt
    ISO 18573:2012 Conveyor belts -- Test atmospheres and conditioning periods
    ISO 21178:2013 Light conveyor belts -- Determination of electrical resistances
    ISO 21179:2013 Light conveyor belts -- Determination of the electrostatic field generated by a running light conveyor belt
    ISO 21180:2013 Light conveyor belts -- Determination of the maximum tensile strength
    ISO 21181:2013 Light conveyor belts -- Determination of the relaxed elastic modulus
    ISO 21182:2013 Light conveyor belts -- Determination of the coefficient of friction
    ISO 21183-1:2005 Light conveyor belts -- Part 1: Principal characteristics and applications
    ISO 21183-2:2005 Light conveyor belts -- Part 2: List of equivalent terms
    ISO 22721:2007 Conveyor belts -- Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining

    Synchronous belt drives
    ISO 5288:2001 Synchronous belt drives -- Vocabulary
    ISO 5294:2012 Synchronous belt drives -- Pulleys
    ISO 5295:1987 Synchronous belts -- Calculation of power rating and drive centre distance
    ISO 5296:2012 Synchronous belt drives -- Belts with pitch codes MXL* XXL* XL* L* H* XH and XXH -- Metric and inch dimensions
    ISO 9010:1997 Synchronous belt drives -- Automotive belts
    ISO 9011:1997 Synchronous belt drives -- Automotive pulleys
    ISO 9563:2015 Belt drives -- Electrical conductivity of antistatic endless synchronous belts -- Characteristics and test method
    ISO 12046:2012 Synchronous belt drives -- Automotive belts -- Determination of physical properties
    ISO 13050:2014 Synchronous belt drives -- Metric pitch* curvilinear profile systems G* H* R and S* belts and pulleys
    ISO 17396:2014 Synchronous belt drives -- Metric pitch* trapezoidal profile systems T and AT* belts and pulleys
    ISO 19347:2015 Synchronous belt drives -- Imperial pitch trapezoidal profile system -- Belts and pulleys


    missing are:

    ISO 22:1991 Belt drives -- Flat transmission belts and corresponding pulleys -- Dimensions and tolerances
    ISO 255:1990 Belt drives -- Pulleys for V-belts (system based on datum width) -- Geometrical inspection of grooves
    ISO 1604:1989 Belt drives -- Endless wide V-belts for industrial speed-changers and groove profiles for corresponding pulleys
    ISO 5287:2003 Belt drives -- Narrow V-belts for the automotive industry -- Fatigue test
    ISO 5290:2001 Belt drives -- Grooved pulleys for joined narrow V-belts -- Groove sections 9N/J* 15N/J and 25N/J (effective system)
    ISO 10247:1990 Conveyor belts -- Characteristics of covers -- Classification
    ISO 10247:1990/Amd 1:2006 Conveyor belts -- Characteristics of covers -- Classification
    ISO 5288:2001 Synchronous belt drives -- Vocabulary
    ISO 9011:1997 Synchronous belt drives -- Automotive pulleys


    links:

    [link Point to another website Only the registered members can access]
    or

    [link Point to another website Only the registered members can access]


    See More: ISO Collection 101/300:ISO/TC 41 - Pulleys and belts (including veebelts)

  2. # ADS
    Spons Circuit
    Join Date
    Always
    Posts
    Many
     
  3. #2

    Re: ISO/TC 41 - Pulleys and belts (including veebelts)

    Can find IEC TC 89: Fire hazard testing?

    My threads; hellen :


  4.    Sponsored Links



    -

  5. #3

  6. #4

    Re: ISO Collection 101/300:ISO/TC 41 - Pulleys and belts (including veebelts)

    update:

    added missing:

    ISO 5287:2003 Belt drives -- Narrow V-belts for the automotive industry -- Fatigue test
    ISO 5290:2001 Belt drives -- Grooved pulleys for joined narrow V-belts -- Groove sections 9N/J* 15N/J and 25N/J (effective system)
    ISO 5288:2001 Synchronous belt drives -- Vocabulary


    the new missing list is:

    ISO 22:1991 Belt drives -- Flat transmission belts and corresponding pulleys -- Dimensions and tolerances
    ISO 255:1990 Belt drives -- Pulleys for V-belts (system based on datum width) -- Geometrical inspection of grooves
    ISO 1604:1989 Belt drives -- Endless wide V-belts for industrial speed-changers and groove profiles for corresponding pulleys
    ISO 282:1992 Conveyor belts -- Sampling
    ISO 433:1991 Conveyor belts -- Marking
    ISO 703:2017 Conveyor belts -- Transverse flexibility (troughability) -- Test method
    ISO 3684:1990/Amd 1:2006 Conveyor belts -- Determination of minimum pulley diameters
    ISO 5284:1986 Conveyor belts -- List of equivalent terms
    ISO 10247:1990 Conveyor belts -- Characteristics of covers -- Classification
    ISO 10247:1990/Amd 1:2006 Conveyor belts -- Characteristics of covers -- Classification
    ISO 15236-2:2017 Steel cord conveyor belts -- Part 2: Preferred belt types
    ISO 9011:1997 Synchronous belt drives -- Automotive pulleys


    new link:

    [link Point to another website Only the registered members can access]


  7. #5

    Re: ISO Collection 101/300:ISO/TC 41 - Pulleys and belts (including veebelts)

    update:

    added missing:

    ISO 22:1991 Belt drives -- Flat transmission belts and corresponding pulleys -- Dimensions and tolerances
    ISO 1604:1989 Belt drives -- Endless wide V-belts for industrial speed-changers and groove profiles for corresponding pulleys
    ISO 282:1992 Conveyor belts -- Sampling
    ISO 703:2017 Conveyor belts -- Transverse flexibility (troughability) -- Test method
    ISO 3684:1990/Amd 1:2006 Conveyor belts -- Determination of minimum pulley diameters
    ISO 15236-2:2017 Steel cord conveyor belts -- Part 2: Preferred belt types
    ISO 15236-3:2007 Steel cord conveyor belts -- Part 3: Special safety requirements for belts for use in underground installations
    ISO 5295:1987 Synchronous belts -- Calculation of power rating and drive centre distance


    better quality:

    ISO 2790:2004 Belt drives -- V-belts for the automotive industry and corresponding pulleys -- Dimensions
    ISO 5289:1992 Agricultural machinery -- Endless hexagonal belts and groove sections of corresponding pulleys
    ISO 5292:1995 Belt drives -- V-belts and V-ribbed belts -- Calculation of power ratings
    ISO 8370-1:1993 Belt drives -- Dynamic test to determine pitch zone location -- Part 1: V-belts
    ISO 8370-2:1993 Belt drives -- Dynamic test to determine pitch zone location -- Part 2: V-ribbed belts
    ISO 8419:2003 Belt drives -- Narrow V-belts -- Sections 9N/J* 15N/J and 25N/J (lengths in the effective system)
    ISO 9608:1994 V-belts -- Uniformity of belts -- Test method for determination of centre distance variation
    ISO 9856:2016 Conveyor belts -- Determination of elastic and permanent elongation and calculation of elastic modulus
    ISO 15236-1:2016 Steel cord conveyor belts -- Part 1: Design* dimensions and mechanical requirements for conveyor belts for general use
    ISO 9010:1997 Synchronous belt drives -- Automotive belts



    the missing list is now:

    ISO 255:1990 Belt drives -- Pulleys for V-belts (system based on datum width) -- Geometrical inspection of grooves
    ISO 5284:1986 Conveyor belts -- List of equivalent terms
    ISO 10247:1990 Conveyor belts -- Characteristics of covers -- Classification
    ISO 10247:1990/Amd 1:2006 Conveyor belts -- Characteristics of covers -- Classification
    ISO 9011:1997 Synchronous belt drives -- Automotive pulleys



    [link Point to another website Only the registered members can access]


  8.    Spons.


  9. #6

    Re: ISO Collection 101/300:ISO/TC 41 - Pulleys and belts (including veebelts)

    full list 11.12.2017.

    ISO 22:1991 Belt drives -- Flat transmission belts and corresponding pulleys -- Dimensions and tolerances
    ISO 155:1998 Belt drives -- Pulleys -- Limiting values for adjustment of centres
    ISO 254:2011 Belt drives -- Pulleys -- Quality, finish and balance
    ISO 255:1990 Belt drives -- Pulleys for V-belts (system based on datum width) -- Geometrical inspection of grooves
    ISO 1081:2013 Belt drives -- V-belts and V-ribbed belts, and corresponding grooved pulleys -- Vocabulary
    ISO 1604:1989 Belt drives -- Endless wide V-belts for industrial speed-changers and groove profiles for corresponding pulleys
    ISO 1813:2014 Belt drives -- V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts -- Electrical conductivity of antistatic belts: Characteristics and methods of test
    ISO 2790:2004 Belt drives -- V-belts for the automotive industry and corresponding pulleys -- Dimensions
    ISO 3410:1989 Agricultural machinery -- Endless variable-speed V-belts and groove sections of corresponding pulleys
    ISO 4183:1995 Belt drives -- Classical and narrow V-belts -- Grooved pulleys (system based on datum width)
    ISO 4184:1992 Belt drives -- Classical and narrow V-belts -- Lengths in datum system
    ISO 5287:2003 Belt drives -- Narrow V-belts for the automotive industry -- Fatigue test
    ISO 5289:1992 Agricultural machinery -- Endless hexagonal belts and groove sections of corresponding pulleys
    ISO 5290:2001 Belt drives -- Grooved pulleys for joined narrow V-belts -- Groove sections 9N/J, 15N/J and 25N/J (effective system)
    ISO 5291:2011 Belt drives -- Grooved pulleys for joined classical V-belts -- Groove sections AJ, BJ, CJ and DJ (effective system)
    ISO 5292:1995 Belt drives -- V-belts and V-ribbed belts -- Calculation of power ratings
    ISO 8370-1:1993 Belt drives -- Dynamic test to determine pitch zone location -- Part 1: V-belts
    ISO 8370-2:1993 Belt drives -- Dynamic test to determine pitch zone location -- Part 2: V-ribbed belts
    ISO 8419:2003 Belt drives -- Narrow V-belts -- Sections 9N/J, 15N/J and 25N/J (lengths in the effective system)
    ISO 9608:1994 V-belts -- Uniformity of belts -- Test method for determination of centre distance variation
    ISO 9980:2012 Belt drives -- Grooved pulleys for V-belts (system based on effective width) -- Geometrical inspection of grooves
    ISO 9981:1998 Belt drives -- Pulleys and V-ribbed belts for the automotive industry -- PK profile: Dimensions
    ISO 9982:1998 Belt drives -- Pulleys and V-ribbed belts for industrial applications -- PH, PJ, PK, PL and PM profiles: dimensions
    ISO 11749:2014 Belt drive -- V-ribbed belts for the automotive industry -- Fatigue test
    ISO 24035:2014 Belt drives -- V-belts and the corresponding pulleys for agricultural machineries -- Dimensions


    ISO 251:2012 Conveyor belts with textile carcass -- Widths and lengths
    ISO 252:2007 Conveyor belts -- Adhesion between constitutive elements -- Test methods
    ISO 282:1992 Conveyor belts -- Sampling
    ISO 283:2015 Textile conveyor belts -- Full thickness tensile strength, elongation at break and elongation at the reference load -- Test method
    ISO 284:2012 Conveyor belts -- Electrical conductivity -- Specification and test method
    ISO 340:2013 Conveyor belts -- Laboratory scale flammability characteristics -- Requirements and test method
    ISO 433:2017 Conveyor belts -- Marking
    ISO 505:2017 Conveyor belts -- Method for the determination of the tear propagation resistance of textile conveyor belts
    ISO 583:2017 Conveyor belts with a textile carcass -- Total belt thickness and thickness of constitutive elements -- Test methods
    ISO 703:2017 Conveyor belts -- Transverse flexibility (troughability) -- Test method
    ISO 1120:2012 Conveyor belts -- Determination of strength of mechanical fastenings -- Static test method
    ISO 3684:1990 Conveyor belts -- Determination of minimum pulley diameters
    ISO 3684:1990/Amd 1:2006 Conveyor belts -- Determination of minimum pulley diameters
    ISO 4195:2012 Conveyor belts with heat-resistant rubber covers -- Heat resistance of covers -- Requirements and test methods
    ISO 5284:1986 Conveyor belts -- List of equivalent terms
    ISO 5284:1986/Cor 1:2005 Conveyor belts -- List of equivalent terms
    ISO 5285:2012 Conveyor belts -- Guidelines for storage and handling
    ISO 5293:2004 Conveyor belts -- Determination of minimum transition distance on three idler rollers
    ISO 5293:2004/Cor 1:2008 Conveyor belts -- Determination of minimum transition distance on three idler rollers
    ISO 7590:2009 Steel cord conveyor belts -- Methods for the determination of total thickness and cover thickness
    ISO 7622-1:2013 Steel cord conveyor belts -- Longitudinal traction test -- Part 1: Measurement of elongation
    ISO 7622-2:2015 Steel cord conveyor belts -- Longitudinal traction test -- Part 2: Measurement of tensile strength
    ISO 7623:2015 Steel cord conveyor belts -- Cord-to-coating bond test -- Initial test and after thermal treatment
    ISO 8094:2013 Steel cord conveyor belts -- Adhesion strength test of the cover to the core layer
    ISO 9856:2016 Conveyor belts -- Determination of elastic and permanent elongation and calculation of elastic modulus
    ISO 10247:1990 Conveyor belts -- Characteristics of covers -- Classification
    ISO 10247:1990/Amd 1:2006 Conveyor belts -- Characteristics of covers -- Classification
    ISO 14890:2013 Conveyor belts -- Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
    ISO 15147:2012 Light conveyor belts -- Tolerances on widths and lengths of cut light conveyor belts
    ISO 15236-1:2016 Steel cord conveyor belts -- Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use
    ISO 15236-2:2017 Steel cord conveyor belts -- Part 2: Preferred belt types
    ISO 15236-3:2017 Steel cord conveyor belts -- Part 3: Special safety requirements for belts for use in underground installations
    ISO 15236-4:2004 Steel cord conveyor belts -- Part 4: Vulcanized belt joints
    ISO 16851:2012 Textile conveyor belts -- Determination of the net length of an endless (spliced) conveyor belt
    ISO 18573:2012 Conveyor belts -- Test atmospheres and conditioning periods
    ISO 21178:2013 Light conveyor belts -- Determination of electrical resistances
    ISO 21179:2013 Light conveyor belts -- Determination of the electrostatic field generated by a running light conveyor belt
    ISO 21180:2013 Light conveyor belts -- Determination of the maximum tensile strength
    ISO 21181:2013 Light conveyor belts -- Determination of the relaxed elastic modulus
    ISO 21182:2013 Light conveyor belts -- Determination of the coefficient of friction
    ISO 21183-1:2005 Light conveyor belts -- Part 1: Principal characteristics and applications
    ISO 21183-2:2005 Light conveyor belts -- Part 2: List of equivalent terms
    ISO 22721:2007 Conveyor belts -- Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining


    ISO 5288:2001 Synchronous belt drives -- Vocabulary
    ISO 5294:2012 Synchronous belt drives -- Pulleys
    ISO 5295:2017 Synchronous belts -- Calculation of power rating and drive centre distance
    ISO 5296:2012 Synchronous belt drives -- Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH -- Metric and inch dimensions
    ISO 9010:1997 Synchronous belt drives -- Automotive belts
    ISO 9011:1997 Synchronous belt drives -- Automotive pulleys
    ISO 9563:2015 Belt drives -- Electrical conductivity of antistatic endless synchronous belts -- Characteristics and test method
    ISO 12046:2012 Synchronous belt drives -- Automotive belts -- Determination of physical properties
    ISO 13050:2014 Synchronous belt drives -- Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys
    ISO 17396:2017 Synchronous belt drives -- Metric pitch -- Tooth profiles T and AT endless and open ended belts and pulleys
    ISO 19347:2015 Synchronous belt drives -- Imperial pitch trapezoidal profile system -- Belts and pulleys


    the missing:

    ISO 255:1990 Belt drives -- Pulleys for V-belts (system based on datum width) -- Geometrical inspection of grooves
    ISO 583:2017 Conveyor belts with a textile carcass -- Total belt thickness and thickness of constitutive elements -- Test methods
    ISO 5284:1986 Conveyor belts -- List of equivalent terms
    ISO 10247:1990 Conveyor belts -- Characteristics of covers -- Classification
    ISO 10247:1990/Amd 1:2006 Conveyor belts -- Characteristics of covers -- Classification
    ISO 9011:1997 Synchronous belt drives -- Automotive pulleys


    [link Point to another website Only the registered members can access]


  10. Re: ISO Collection 101/300:ISO/TC 41 - Pulleys and belts (including veebelts)

    With a lot of thank you.

    My threads; b40wapr :


    •   

    Similar Threads

    1. CEN Standards Collection 129/370: CEN TC 188 - Conveyor Belts
      By BornToSin in forum Mechanical Engineering
      Replies: 15
      Last Post: 12-28-2017, 05:18 PM
    2. ISO 252 : Conveyor Belts required
      By pinkerton in forum Mechanical Engineering
      Replies: 0
      Last Post: 12-04-2013, 08:46 AM
    3. Structural geology of fold and thrust belts
      By wangrenf in forum Geology & Exploration
      Replies: 0
      Last Post: 05-17-2013, 06:04 AM

    Tags for this Thread

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •