Results 1 to 6 of 6

Thread: ISO Collection 123/300:ISO/TC 79 - Light metals and their alloys

  1. #1

    ISO Collection 123/300:ISO/TC 79 - Light metals and their alloys

    Standards and projects under the direct responsibility of ISO/TC 79 Secretariat
    ISO 791:1973 Magnesium alloys -- Determination of aluminium -- 8-hydroxyquinoline gravimetric method
    ISO 792:1973 Magnesium and magnesium alloys -- Determination of iron -- Orthophenanthroline photometric method
    ISO 793:1973 Aluminium and aluminium alloys -- Determination of iron -- Orthophenanthroline photometric method
    ISO 794:1976 Magnesium and magnesium alloys -- Determination of copper content -- Oxalyldihydrazide photometric method
    ISO 795:1976 Aluminium and aluminium alloys -- Determination of copper content -- Oxalyldihydrazide photometric method
    ISO 796:1973 Aluminium alloys -- Determination of copper -- Electrolytic method
    ISO 797:1973 Aluminium and aluminium alloys -- Determination of silicon -- Gravimetric method
    ISO 808:1973 Aluminium and aluminium alloys -- Determination of silicon -- Spectrophotometric method with the reduced silicomolybdic complex
    ISO 809:1973 Magnesium and magnesium alloys -- Determination of manganese -- Periodate photometric method (Manganese content between 0*01 and 0*8 %)
    ISO 810:1973 Magnesium and magnesium alloys -- Determination of manganese -- Periodate photometric method (Manganese content less than 0*01 %)
    ISO 886:1973 Aluminium and aluminium alloys -- Determination of manganese -- Photometric method (Manganese content between 0*005 and 1*5 %)
    ISO 1118:1978 Aluminium and aluminium alloys -- Determination of titanium -- Spectrophotometric chromotropic acid method
    ISO 1178:1976 Magnesium alloys -- Determination of soluble zirconium -- Alizarin sulphonate photometric method
    ISO 1783:1973 Magnesium alloys -- Determination of zinc -- Volumetric method
    ISO 1784:1976 Aluminium alloys -- Determination of zinc -- EDTA titrimetric method
    ISO 1975:1973 Magnesium and magnesium alloys -- Determination of silicon -- Spectrophotometric method with the reduced silicomolybdic complex
    ISO 2297:1973 Chemical analysis of aluminium and its alloys -- Complexometric determination of magnesium
    ISO 2353:1972 Magnesium and its alloys -- Determination of manganese in magnesium alloys containing zirconium* rare earths* thorium and silver -- Periodate photometric method
    ISO 2354:1976 Magnesium alloys -- Determination of insoluble zirconium -- Alizarin sulphonate photometric method
    ISO 2355:1972 Chemical analysis of magnesium and its alloys -- Determination of rare earths -- Gravimetric method
    ISO 3255:1974 Magnesium and magnesium alloys -- Determination of aluminium -- Chromazurol S photometric method
    ISO 3256:1977 Aluminium and aluminium alloys -- Determination of magnesium -- Atomic absorption spectrophotometric method
    ISO 3978:1976 Aluminium and aluminium alloys -- Determination of chromium -- Spectrophotometric method using diphenylcarbazide* after extraction
    ISO 3979:1977 Aluminium and aluminium alloys -- Determination of nickel -- Spectrophotometric method using dimethylglyoxime
    ISO 3980:1977 Aluminium and aluminium alloys -- Determination of copper -- Atomic absorption spectrophotometric method
    ISO 3981:1977 Aluminium and aluminium alloys -- Determination of nickel -- Atomic absorption spectrophotometric method
    ISO 4058:1977 Magnesium and its alloys -- Determination of nickel -- Photometric method using dimethylglyoxime
    ISO 4192:1981 Aluminium and aluminium alloys -- Determination of lead content -- Flame atomic absorption spectrometric method
    ISO 4193:1981 Aluminium and aluminium alloys -- Determination of chromium content -- Flame atomic absorption spectrometric method
    ISO 4194:1981 Magnesium alloys -- Determination of zinc content -- Flame atomic absorption spectrometric method
    ISO 5194:1981 Aluminium and aluminium alloys -- Determination of zinc content -- Flame atomic absorption spectrometric method
    ISO 5196-1:1980 Magnesium alloys -- Determination of thorium -- Part 1: Gravimetric method
    ISO 5196-2:1980 Magnesium alloys -- Determination of thorium -- Part 2: Titrimetric method
    ISO 6827:1981 Aluminium and aluminium alloys -- Determination of titanium content -- Diantipyrylmethane photometric method
    ISO/TR 7242:1981 Chemical analysis of light metals and their alloys -- Statistical interpretation of inter-laboratory trials

    Organic and anodic oxidation coatings on aluminium
    ISO 2085:2010 Anodizing of aluminium and its alloys -- Check for continuity of thin anodic oxidation coatings -- Copper sulfate test
    ISO 2106:2011 Anodizing of aluminium and its alloys -- Determination of mass per unit area (surface density) of anodic oxidation coatings -- Gravimetric method
    ISO 2128:2010 Anodizing of aluminium and its alloys -- Determination of thickness of anodic oxidation coatings -- Non-destructive measurement by split-beam microscope
    ISO 2135:2010 Anodizing of aluminium and its alloys -- Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
    ISO 2143:2010 Anodizing of aluminium and its alloys -- Estimation of loss of absorptive power of anodic oxidation coatings after sealing -- Dye-spot test with prior acid treatment
    ISO 2376:2010 Anodizing of aluminium and its alloys -- Determination of electric breakdown potential
    ISO 2931:2010 Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
    ISO 3210:2010 Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution
    ISO 3211:2010 Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxidation coatings to *****ing by deformation
    ISO 6581:2010 Anodizing of aluminium and its alloys -- Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
    ISO 6719:2010 Anodizing of aluminium and its alloys -- Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
    ISO 7583:2013 Anodizing of aluminium and its alloys -- Terms and definitions
    ISO 7599:2010 Anodizing of aluminium and its alloys -- General specifications for anodic oxidation coatings on aluminium
    ISO 7668:2010 Anodizing of aluminium and its alloys -- Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees* 45 degrees* 60 degrees or 85 degrees
    ISO 7759:2010 Anodizing of aluminium and its alloys -- Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
    ISO 8251:2011 Anodizing of aluminium and its alloys -- Measurement of abrasion resistance of anodic oxidation coatings
    ISO 8993:2010 Anodizing of aluminium and its alloys -- Rating system for the evaluation of pitting corrosion -- Chart method
    ISO 8994:2011 Anodizing of aluminium and its alloys -- Rating system for the evaluation of pitting corrosion -- Grid method
    ISO 10074:2010 Anodizing of aluminium and its alloys -- Specification for hard anodic oxidation coatings on aluminium and its alloys
    ISO 10215:2010 Anodizing of aluminium and its alloys -- Visual determination of image clarity of anodic oxidation coatings -- Chart scale method
    ISO 10216:2010 Anodizing of aluminium and its alloys -- Instrumental determination of image clarity of anodic oxidation coatings -- Instrumental method
    ISO 10216:2010/Cor 1:2011 Anodizing of aluminium and its alloys -- Instrumental determination of image clarity of anodic oxidation coatings -- Instrumental method
    ISO/TR 16689:2012 Anodizing of aluminium and its alloys -- Experimental research on possible alternative sealing quality test methods to replace the phosphoric acid/chromic acid immersion test -- Evaluation of correlations
    ISO 28340:2013 Combined coatings on aluminium -- General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium

    Unalloyed (refined) aluminium ingots
    ISO 115:2003 Unalloyed aluminium ingots for remelting -- Classification and composition

    Magnesium and alloys of cast or wrought magnesium
    ISO 3116:2007 Magnesium and magnesium alloys -- Wrought magnesium alloys
    ISO 8287:2011 Magnesium and magnesium alloys -- Unalloyed magnesium -- Chemical composition
    ISO 11707:2011 Magnesium and its alloys -- Determination of lead and cadmium
    ISO 16220:2005 Magnesium and magnesium alloys -- Magnesium alloy ingots and castings
    ISO 16220:2005/Amd 1:2007 Additional alloys
    ISO 16374:2016 Evaluation method for cleanliness of magnesium and magnesium alloy ingots
    ISO 23079:2005 Magnesium and magnesium alloys -- Returns -- Requirements* classification and acceptance
    ISO 26202:2007 Magnesium and magnesium alloys -- Magnesium alloys for cast anodes

    Wrought aluminium and aluminium alloys
    ISO 209:2007 Aluminium and aluminium alloys -- Chemical composition
    ISO 6361-1:2011 Wrought aluminium and aluminium alloys -- Sheets* strips and plates -- Part 1: Technical conditions for inspection and delivery
    ISO 6361-2:2014 Wrought aluminium and aluminium alloys -- Sheets* strips and plates -- Part 2: Mechanical properties
    ISO 6361-3:2014 Wrought aluminium and aluminium alloys -- Sheets* strips and plates -- Part 3: Strips: Tolerances on shape and dimensions
    ISO 6361-4:2014 Wrought aluminium and aluminium alloys -- Sheets* strips and plates -- Part 4: Sheets and plates: Tolerances on shape and dimensions
    ISO 6361-5:2011 Wrought aluminium and aluminium alloys -- Sheets* strips and plates -- Part 5: Chemical composition
    ISO 6362-1:2012 Wrought aluminium and aluminium alloys -- Extruded rods/bars* tubes and profiles -- Part 1: Technical conditions for inspection and delivery
    ISO 6362-2:2014 Wrought aluminium and aluminium alloys -- Extruded rods/bars* tubes and profiles -- Part 2: Mechanical properties
    ISO 6362-3:2012 Wrought aluminium and aluminium alloys -- Extruded rods/bars* tubes and profiles -- Part 3: Extruded rectangular bars -- Tolerances on shape and dimensions
    ISO 6362-4:2012 Wrought aluminium and aluminium alloys -- Extruded rods/bars* tubes and profiles -- Part 4: Profiles -- Tolerances on shape and dimensions
    ISO 6362-5:2012 Wrought aluminium and aluminium alloys -- Extruded rods/bars* tubes and profiles -- Part 5: Round* square and hexagonal bars -- Tolerances on shape and dimensions
    ISO 6362-6:2012 Wrought aluminium and aluminium alloys -- Extruded rods/bars* tubes and profiles -- Part 6: Round* square* rectangular and hexagonal tubes -- Tolerances on shape and dimensions
    ISO 6362-7:2014 Wrought aluminium and aluminium alloys -- Extruded rods/bars* tubes and profiles -- Part 7: Chemical composition
    ISO 6363-1:2012 Wrought aluminium and aluminium alloys -- Cold-drawn rods/bars* tubes and wires -- Part 1: Technical conditions for inspection and delivery
    ISO 6363-2:2012 Wrought aluminium and aluminium alloys -- Cold-drawn rods/bars and tubes and wires -- Part 2: Mechanical properties
    ISO 6363-3:2012 Wrought aluminium and aluminium alloys -- Cold-drawn rods/bars* tubes and wires -- Part 3: Drawn round bars and wires -- Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter)
    ISO 6363-4:2012 Wrought aluminium and aluminium alloys -- Cold-drawn rods/bars* tubes and wires -- Part 4: Drawn rectangular bars and wires -- Tolerances on form and dimensions
    ISO 6363-5:2012 Wrought aluminium and aluminium alloys -- Cold-drawn rods/bars* tubes and wires -- Part 5: Drawn square and hexagonal bars and wires -- Tolerances on form and dimensions
    ISO 6363-6:2012 Wrought aluminium and aluminium alloys -- Cold-drawn rods/bars* tubes and wires -- Part 6: Drawn round tubes -- Tolerances on form and dimensions
    ISO 7271:2011 Aluminium and aluminium alloys -- Foil and thin strip -- Dimensional tolerances

    Aluminium and cast aluminium alloys
    ISO 3522:2007 Aluminium and aluminium alloys -- Castings -- Chemical composition and mechanical properties
    ISO 17615:2007 Aluminium and aluminium alloys -- Alloyed ingots for remelting -- Specifications
    ISO 17615:2007/COR 1:2008 Aluminium and aluminium alloys -- Alloyed ingots for remelting -- Specifications

    Symbolization
    ISO 2107:2007 Aluminium and aluminium alloys -- Wrought products -- Temper designations

    Titanium
    ISO 13092:2012 Titanium and titanium alloys -- Titanium sponge
    ISO 18762:2016 Tubes of titanium and titanium alloys -- Welded tubes for condensers and heat exchangers -- Technical delivery conditions
    ISO 22960:2008 Titanium and titanium alloys -- Determination of iron -- Molecular absorption spectrometry using 1* 10-phenanthroline
    ISO 22961:2008 Titanium and titanium alloys -- Determination of iron -- Atomic absorption spectrometry
    ISO 22962:2008 Titanium and titanium alloys -- Determination of iron -- Inductively coupled plasma atomic emission spectrometry
    ISO 22963:2008 Titanium and titanium alloys -- Determination of oxygen -- Infrared method after fusion under inert gas
    ISO 25902-1:2009 Titanium pipes and tubes -- Non-destructive testing -- Part 1: Eddy-current examination
    ISO 25902-2:2010 Titanium pipes and tubes -- Non-destructive testing -- Part 2: Ultrasonic testing for the detection of longitudinal imperfections
    ISO 28401:2010 Light metals and their alloys -- Titanium and titanium alloys -- Classification and terminology

    Aluminium ores
    ISO 6139:1993 Aluminium ores -- Experimental determination of the heterogeneity of distribution of a lot
    ISO 8685:1992 Aluminium ores -- Sampling procedures
    ISO 9033:1989 Aluminium ores -- Determination of the moisture content of bulk material
    ISO 9208:1989 Aluminium ores - Determination of vanadium content -- BPHA spectrophotometric method


    missing are:

    ISO 794:1976 Magnesium and magnesium alloys -- Determination of copper content -- Oxalyldihydrazide photometric method
    ISO 795:1976 Aluminium and aluminium alloys -- Determination of copper content -- Oxalyldihydrazide photometric method
    ISO 796:1973 Aluminium alloys -- Determination of copper -- Electrolytic method
    ISO 808:1973 Aluminium and aluminium alloys -- Determination of silicon -- Spectrophotometric method with the reduced silicomolybdic complex
    ISO 810:1973 Magnesium and magnesium alloys -- Determination of manganese -- Periodate photometric method (Manganese content less than 0*01 %)
    ISO 1118:1978 Aluminium and aluminium alloys -- Determination of titanium -- Spectrophotometric chromotropic acid method
    ISO 1975:1973 Magnesium and magnesium alloys -- Determination of silicon -- Spectrophotometric method with the reduced silicomolybdic complex
    ISO 3978:1976 Aluminium and aluminium alloys -- Determination of chromium -- Spectrophotometric method using diphenylcarbazide* after extraction
    ISO 5196-2:1980 Magnesium alloys -- Determination of thorium -- Part 2: Titrimetric method
    ISO 6139:1993 Aluminium ores -- Experimental determination of the heterogeneity of distribution of a lot
    ISO 9033:1989 Aluminium ores -- Determination of the moisture content of bulk material


    links:

    [link Point to another website Only the registered members can access]
    or

    [link Point to another website Only the registered members can access]


    See More: ISO Collection 123/300:ISO/TC 79 - Light metals and their alloys

  2. # ADS
    Spons Circuit
    Join Date
    Always
    Posts
    Many
     
  3. #2

  4.    Sponsored Links



    -

  5. #3

    Re: ISO Collection 123/300:ISO/TC 79 - Light metals and their alloys

    update:

    added missing:

    ISO 794:1976 Magnesium and magnesium alloys -- Determination of copper content -- Oxalyldihydrazide photometric method
    ISO 795:1976 Aluminium and aluminium alloys -- Determination of copper content -- Oxalyldihydrazide photometric method
    ISO 796:1973 Aluminium alloys -- Determination of copper -- Electrolytic method
    ISO 808:1973 Aluminium and aluminium alloys -- Determination of silicon -- Spectrophotometric method with the reduced silicomolybdic complex
    ISO 810:1973 Magnesium and magnesium alloys -- Determination of manganese -- Periodate photometric method (Manganese content less than 0*01 %)
    ISO 3978:1976 Aluminium and aluminium alloys -- Determination of chromium -- Spectrophotometric method using diphenylcarbazide* after extraction


    smaller missing list now:

    ISO 1118:1978 Aluminium and aluminium alloys -- Determination of titanium -- Spectrophotometric chromotropic acid method
    ISO 1975:1973 Magnesium and magnesium alloys -- Determination of silicon -- Spectrophotometric method with the reduced silicomolybdic complex
    ISO 5196-2:1980 Magnesium alloys -- Determination of thorium -- Part 2: Titrimetric method
    ISO 6139:1993 Aluminium ores -- Experimental determination of the heterogeneity of distribution of a lot
    ISO 9033:1989 Aluminium ores -- Determination of the moisture content of bulk material


    new link:

    [link Point to another website Only the registered members can access]


  6. #4

    Re: ISO Collection 123/300:ISO/TC 79 - Light metals and their alloys

    had some notebook crashing problems* no big deal* anyway* a lot of updates here* added missing or new or BQ or EN...only missing one is now:

    ISO 6139:1993 Aluminium ores -- Experimental determination of the heterogeneity of distribution of a lot


    [link Point to another website Only the registered members can access]


  7. #5

    Re: ISO Collection 123/300:ISO/TC 79 - Light metals and their alloys

    full list 28.12.2017.

    ISO 791:1973 Magnesium alloys -- Determination of aluminium -- 8-hydroxyquinoline gravimetric method
    ISO 792:1973 Magnesium and magnesium alloys -- Determination of iron -- Orthophenanthroline photometric method
    ISO 793:1973 Aluminium and aluminium alloys -- Determination of iron -- Orthophenanthroline photometric method
    ISO 794:1976 Magnesium and magnesium alloys -- Determination of copper content -- Oxalyldihydrazide photometric method
    ISO 795:1976 Aluminium and aluminium alloys -- Determination of copper content -- Oxalyldihydrazide photometric method
    ISO 796:1973 Aluminium alloys -- Determination of copper -- Electrolytic method
    ISO 797:1973 Aluminium and aluminium alloys -- Determination of silicon -- Gravimetric method
    ISO 808:1973 Aluminium and aluminium alloys -- Determination of silicon -- Spectrophotometric method with the reduced silicomolybdic complex
    ISO 809:1973 Magnesium and magnesium alloys -- Determination of manganese -- Periodate photometric method (Manganese content between 0,01 and 0,8 %)
    ISO 810:1973 Magnesium and magnesium alloys -- Determination of manganese -- Periodate photometric method (Manganese content less than 0,01 %)
    ISO 886:1973 Aluminium and aluminium alloys -- Determination of manganese -- Photometric method (Manganese content between 0,005 and 1,5 %)
    ISO 1118:1978 Aluminium and aluminium alloys -- Determination of titanium -- Spectrophotometric chromotropic acid method
    ISO 1178:1976 Magnesium alloys -- Determination of soluble zirconium -- Alizarin sulphonate photometric method
    ISO 1783:1973 Magnesium alloys -- Determination of zinc -- Volumetric method
    ISO 1784:1976 Aluminium alloys -- Determination of zinc -- EDTA titrimetric method
    ISO 1975:1973 Magnesium and magnesium alloys -- Determination of silicon -- Spectrophotometric method with the reduced silicomolybdic complex
    ISO 2297:1973 Chemical analysis of aluminium and its alloys -- Complexometric determination of magnesium
    ISO 2353:1972 Magnesium and its alloys -- Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and silver -- Periodate photometric method
    ISO 2354:1976 Magnesium alloys -- Determination of insoluble zirconium -- Alizarin sulphonate photometric method
    ISO 2355:1972 Chemical analysis of magnesium and its alloys -- Determination of rare earths -- Gravimetric method
    ISO 3255:1974 Magnesium and magnesium alloys -- Determination of aluminium -- Chromazurol S photometric method
    ISO 3256:1977 Aluminium and aluminium alloys -- Determination of magnesium -- Atomic absorption spectrophotometric method
    ISO 3978:1976 Aluminium and aluminium alloys -- Determination of chromium -- Spectrophotometric method using diphenylcarbazide, after extraction
    ISO 3979:1977 Aluminium and aluminium alloys -- Determination of nickel -- Spectrophotometric method using dimethylglyoxime
    ISO 3980:1977 Aluminium and aluminium alloys -- Determination of copper -- Atomic absorption spectrophotometric method
    ISO 3981:1977 Aluminium and aluminium alloys -- Determination of nickel -- Atomic absorption spectrophotometric method
    ISO 4058:1977 Magnesium and its alloys -- Determination of nickel -- Photometric method using dimethylglyoxime
    ISO 4192:1981 Aluminium and aluminium alloys -- Determination of lead content -- Flame atomic absorption spectrometric method
    ISO 4193:1981 Aluminium and aluminium alloys -- Determination of chromium content -- Flame atomic absorption spectrometric method
    ISO 4194:1981 Magnesium alloys -- Determination of zinc content -- Flame atomic absorption spectrometric method
    ISO 5194:1981 Aluminium and aluminium alloys -- Determination of zinc content -- Flame atomic absorption spectrometric method
    ISO 5196-1:1980 Magnesium alloys -- Determination of thorium -- Part 1: Gravimetric method
    ISO 5196-2:1980 Magnesium alloys -- Determination of thorium -- Part 2: Titrimetric method
    ISO 6827:1981 Aluminium and aluminium alloys -- Determination of titanium content -- Diantipyrylmethane photometric method
    ISO/TR 7242:1981 Chemical analysis of light metals and their alloys -- Statistical interpretation of inter-laboratory trials


    ISO 2085:2010 Anodizing of aluminium and its alloys -- Check for continuity of thin anodic oxidation coatings -- Copper sulfate test
    ISO 2106:2011 Anodizing of aluminium and its alloys -- Determination of mass per unit area (surface density) of anodic oxidation coatings -- Gravimetric method
    ISO 2128:2010 Anodizing of aluminium and its alloys -- Determination of thickness of anodic oxidation coatings -- Non-destructive measurement by split-beam microscope
    ISO 2135:2017 Anodizing of aluminium and its alloys -- Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
    ISO 2143:2017 Anodizing of aluminium and its alloys -- Estimation of loss of absorptive power of anodic oxidation coatings after sealing -- Dye-spot test with prior acid treatment
    ISO 2376:2010 Anodizing of aluminium and its alloys -- Determination of electric breakdown potential
    ISO 2931:2017 Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
    ISO 3210:2017 Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
    ISO 3211:2010 Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxidation coatings to *****ing by deformation
    ISO 6581:2010 Anodizing of aluminium and its alloys -- Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
    ISO 6719:2010 Anodizing of aluminium and its alloys -- Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
    ISO 7583:2013 Anodizing of aluminium and its alloys -- Terms and definitions
    ISO 7599:2010 Anodizing of aluminium and its alloys -- General specifications for anodic oxidation coatings on aluminium
    ISO 7668:2010 Anodizing of aluminium and its alloys -- Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
    ISO 7759:2010 Anodizing of aluminium and its alloys -- Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
    ISO 8251:2011 Anodizing of aluminium and its alloys -- Measurement of abrasion resistance of anodic oxidation coatings
    ISO 8993:2010 Anodizing of aluminium and its alloys -- Rating system for the evaluation of pitting corrosion -- Chart method
    ISO 8994:2011 Anodizing of aluminium and its alloys -- Rating system for the evaluation of pitting corrosion -- Grid method
    ISO 10074:2017 Anodizing of aluminium and its alloys -- Specification for hard anodic oxidation coatings on aluminium and its alloys
    ISO 10215:2010 Anodizing of aluminium and its alloys -- Visual determination of image clarity of anodic oxidation coatings -- Chart scale method
    ISO 10216:2017 Anodizing of aluminium and its alloys -- Instrumental determination of image clarity of anodic oxidation coatings -- Instrumental method
    ISO/TS 16688:2017 Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
    ISO/TR 16689:2012 Anodizing of aluminium and its alloys -- Experimental research on possible alternative sealing quality test methods to replace the phosphoric acid/chromic acid immersion test -- Evaluation of correlations
    ISO 28340:2013 Combined coatings on aluminium -- General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium


    ISO 115:2003 Unalloyed aluminium ingots for remelting -- Classification and composition


    ISO 3116:2007 Magnesium and magnesium alloys -- Wrought magnesium alloys
    ISO 8287:2011 Magnesium and magnesium alloys -- Unalloyed magnesium -- Chemical composition
    ISO 11707:2011 Magnesium and its alloys -- Determination of lead and cadmium
    ISO 16220:2017 Magnesium and magnesium alloys -- Magnesium alloy ingots and castings
    ISO 16374:2016 Evaluation method for cleanliness of magnesium and magnesium alloy ingots
    ISO 23079:2005 Magnesium and magnesium alloys -- Returns -- Requirements, classification and acceptance
    ISO 26202:2007 Magnesium and magnesium alloys -- Magnesium alloys for cast anodes


    ISO 209:2007 Aluminium and aluminium alloys -- Chemical composition
    ISO 6361-1:2011 Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 1: Technical conditions for inspection and delivery
    ISO 6361-2:2014 Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 2: Mechanical properties
    ISO 6361-3:2014 Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 3: Strips: Tolerances on shape and dimensions
    ISO 6361-4:2014 Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 4: Sheets and plates: Tolerances on shape and dimensions
    ISO 6361-5:2011 Wrought aluminium and aluminium alloys -- Sheets, strips and plates -- Part 5: Chemical composition
    ISO 6362-1:2012 Wrought aluminium and aluminium alloys -- Extruded rods/bars, tubes and profiles -- Part 1: Technical conditions for inspection and delivery
    ISO 6362-2:2014 Wrought aluminium and aluminium alloys -- Extruded rods/bars, tubes and profiles -- Part 2: Mechanical properties
    ISO 6362-3:2012 Wrought aluminium and aluminium alloys -- Extruded rods/bars, tubes and profiles -- Part 3: Extruded rectangular bars -- Tolerances on shape and dimensions
    ISO 6362-4:2012 Wrought aluminium and aluminium alloys -- Extruded rods/bars, tubes and profiles -- Part 4: Profiles -- Tolerances on shape and dimensions
    ISO 6362-5:2012 Wrought aluminium and aluminium alloys -- Extruded rods/bars, tubes and profiles -- Part 5: Round, square and hexagonal bars -- Tolerances on shape and dimensions
    ISO 6362-6:2012 Wrought aluminium and aluminium alloys -- Extruded rods/bars, tubes and profiles -- Part 6: Round, square, rectangular and hexagonal tubes -- Tolerances on shape and dimensions
    ISO 6362-7:2014 Wrought aluminium and aluminium alloys -- Extruded rods/bars, tubes and profiles -- Part 7: Chemical composition
    ISO 6363-1:2012 Wrought aluminium and aluminium alloys -- Cold-drawn rods/bars, tubes and wires -- Part 1: Technical conditions for inspection and delivery
    ISO 6363-2:2012 Wrought aluminium and aluminium alloys -- Cold-drawn rods/bars and tubes and wires -- Part 2: Mechanical properties
    ISO 6363-3:2012 Wrought aluminium and aluminium alloys -- Cold-drawn rods/bars, tubes and wires -- Part 3: Drawn round bars and wires -- Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter)
    ISO 6363-4:2012 Wrought aluminium and aluminium alloys -- Cold-drawn rods/bars, tubes and wires -- Part 4: Drawn rectangular bars and wires -- Tolerances on form and dimensions
    ISO 6363-5:2012 Wrought aluminium and aluminium alloys -- Cold-drawn rods/bars, tubes and wires -- Part 5: Drawn square and hexagonal bars and wires -- Tolerances on form and dimensions
    ISO 6363-6:2012 Wrought aluminium and aluminium alloys -- Cold-drawn rods/bars, tubes and wires -- Part 6: Drawn round tubes -- Tolerances on form and dimensions
    ISO 7271:2011 Aluminium and aluminium alloys -- Foil and thin strip -- Dimensional tolerances


    ISO 3522:2007 Aluminium and aluminium alloys -- Castings -- Chemical composition and mechanical properties
    ISO 17615:2007 Aluminium and aluminium alloys -- Alloyed ingots for remelting -- Specifications
    ISO 17615:2007/COR 1:2008 Aluminium and aluminium alloys -- Alloyed ingots for remelting -- Specifications


    ISO 2107:2007 Aluminium and aluminium alloys -- Wrought products -- Temper designations


    ISO 13092:2012 Titanium and titanium alloys -- Titanium sponge
    ISO 18762:2016 Tubes of titanium and titanium alloys -- Welded tubes for condensers and heat exchangers -- Technical delivery conditions
    ISO 22960:2008 Titanium and titanium alloys -- Determination of iron -- Molecular absorption spectrometry using 1, 10-phenanthroline
    ISO 22961:2008 Titanium and titanium alloys -- Determination of iron -- Atomic absorption spectrometry
    ISO 22962:2008 Titanium and titanium alloys -- Determination of iron -- Inductively coupled plasma atomic emission spectrometry
    ISO 22963:2008 Titanium and titanium alloys -- Determination of oxygen -- Infrared method after fusion under inert gas
    ISO 25902-1:2009 Titanium pipes and tubes -- Non-destructive testing -- Part 1: Eddy-current examination
    ISO 25902-2:2010 Titanium pipes and tubes -- Non-destructive testing -- Part 2: Ultrasonic testing for the detection of longitudinal imperfections
    ISO 28401:2010 Light metals and their alloys -- Titanium and titanium alloys -- Classification and terminology


    ISO 6139:1993 Aluminium ores -- Experimental determination of the heterogeneity of distribution of a lot
    ISO 8685:1992 Aluminium ores -- Sampling procedures
    ISO 9033:1989 Aluminium ores -- Determination of the moisture content of bulk material
    ISO 9208:1989 Aluminium ores - Determination of vanadium content -- BPHA spectrophotometric method


    the missing:

    ISO 2931:2017 Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
    ISO/TS 16688:2017 Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
    ISO 6139:1993 Aluminium ores -- Experimental determination of the heterogeneity of distribution of a lot




    [link Point to another website Only the registered members can access]


  8.    Spons.


  9. Re: ISO Collection 123/300:ISO/TC 79 - Light metals and their alloys

    I need this specification please iso/ts 16688:2017

    My threads; mohammad.maklad :


    •   

    Similar Threads

    1. ISO Collection 6/300:ISO TC 156-Corrosion of metals and alloys
      By BornToSin in forum Mechanical Engineering
      Replies: 6
      Last Post: 11-18-2017, 03:29 AM
    2. ISO/TC 156 - Corrosion of metals and alloys
      By BornToSin in forum Mechanical Engineering
      Replies: 3
      Last Post: 06-23-2017, 06:56 AM
    3. Metals and Alloys
      By Han Ah kwang in forum Mechanical Engineering
      Replies: 0
      Last Post: 03-03-2015, 02:25 PM
    4. Light Metals 2013
      By Han Ah kwang in forum Mechanical Engineering
      Replies: 0
      Last Post: 06-21-2014, 09:45 AM
    5. Light Metal Alloys Applications
      By Han Ah kwang in forum Materials Science &Corrosion
      Replies: 1
      Last Post: 06-20-2014, 03:54 PM

    Tags for this Thread

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •