Results 1 to 11 of 11
  1. #1

    ISO Collection 52/300:ISO/TC 112 - Vacuum technology

    full list:

    ISO 1608-1:1993 Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)
    ISO 1608-2:1989 Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure
    ISO 1609:1986 Vacuum technology -- Flange dimensions
    ISO 2861:2013 Vacuum technology -- Dimensions of clamped-type quick-release couplings
    ISO 3529-1:1981 Vacuum technology -- Vocabulary -- Part 1: General terms
    ISO 3529-2:1981 Vacuum technology -- Vocabulary -- Part 2: Vacuum pumps and related terms
    ISO 3529-3:2014 Vacuum technology -- Vocabulary -- Part 3: Total and partial pressure vacuum gauges
    ISO 3567:2011 Vacuum gauges -- Calibration by direct comparison with a reference gauge
    ISO/TS 3669-2:2007 Vacuum technology -- Bakable flanges -- Part 2: Dimensions of knife-edge flanges
    ISO 5302:2003 Vacuum technology -- Turbomolecular pumps -- Measurement of performance characteristics
    ISO 9803-1:2007 Vacuum technology -- Mounting dimensions of pipeline fittings -- Part 1: Non knife-edge flange type
    ISO 9803-2:2007 Vacuum technology -- Mounting dimensions of pipeline fittings -- Part 2: Knife-edge flange type
    ISO 14291:2012 Vacuum gauges -- Definitions and specifications for quadrupole mass spectrometers
    ISO 21358:2007 Vacuum technology -- Right-angle valve -- Dimensions and interfaces for pneumatic actuator
    ISO 21360-1:2012 Vacuum technology -- Standard methods for measuring vacuum-pump performance -- Part 1: General description
    ISO 21360-2:2012 Vacuum technology -- Standard methods for measuring vacuum-pump performance -- Part 2: Positive displacement vacuum pumps
    ISO 27892:2010 Vacuum technology -- Turbomolecular pumps -- Measurement of rapid shutdown torque
    ISO 27893:2011 Vacuum technology -- Vacuum gauges -- Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
    ISO 27894:2009 Vacuum technology -- Vacuum gauges -- Specifications for hot cathode ionization gauges
    ISO 27895:2009 Vacuum technology -- Valves -- Leak test


    4 are missing:

    ISO 1608-1:1993 Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)
    ISO 1608-2:1989 Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure
    ISO 27892:2010 Vacuum technology -- Turbomolecular pumps -- Measurement of rapid shutdown torque
    ISO 27894:2009 Vacuum technology -- Vacuum gauges -- Specifications for hot cathode ionization gauges


    links:

    [link Point to another website Only the registered members can access]
    or

    [link Point to another website Only the registered members can access]


    See More: ISO Collection 52/300:ISO/TC 112 - Vacuum technology

  2. # ADS
    Spons Circuit
    Join Date
    Always
    Posts
    Many
     
  3. #2

    Re: ISO/TC 112 - Vacuum technology

    thanks a lot

  4.    Sponsored Links



    -

  5. #3

  6. #4

    Re: ISO/TC 112 - Vacuum technology

    Thanks a lot!

  7. #5

    Re: ISO Collection 52/300:ISO/TC 112 - Vacuum technology

    update:

    added missing standards:

    ISO 27892:2010 Vacuum technology -- Turbomolecular pumps -- Measurement of rapid shutdown torque
    ISO 27894:2009 Vacuum technology -- Vacuum gauges -- Specifications for hot cathode ionization gauges


    still missing:

    ISO 1608-1:1993 Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)
    ISO 1608-2:1989 Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure


    new link:

    [link Point to another website Only the registered members can access]


  8.    Spons.


  9. #6

    Re: ISO Collection 52/300:ISO/TC 112 - Vacuum technology

    update:

    better quality:

    ISO 3529-1:1981 Vacuum technology -- Vocabulary -- Part 1: General terms
    ISO 3529-2:1981 Vacuum technology -- Vocabulary -- Part 2: Vacuum pumps and related terms
    ISO 5302:2003 Vacuum technology -- Turbomolecular pumps -- Measurement of performance characteristics


    same 2 still missing here:

    ISO 1608-1:1993 Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)
    ISO 1608-2:1989 Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure


    [link Point to another website Only the registered members can access]


  10. #7

    Re: ISO Collection 52/300:ISO/TC 112 - Vacuum technology

    ISO 1608-1:1993 Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)

    [link Point to another website Only the registered members can access]
    ISO 1608-2:1989 Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure

    [link Point to another website Only the registered members can access]

    complete


  11. #8

    Re: ISO Collection 52/300:ISO/TC 112 - Vacuum technology

    full list 23.11.2017:

    ISO 1608-1:1993 Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)
    ISO 1608-2:1989 Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure
    ISO 1609:1986 Vacuum technology -- Flange dimensions
    ISO 2861:2013 Vacuum technology -- Dimensions of clamped-type quick-release couplings
    ISO 3529-1:1981 Vacuum technology -- Vocabulary -- Part 1: General terms
    ISO 3529-2:1981 Vacuum technology -- Vocabulary -- Part 2: Vacuum pumps and related terms
    ISO 3529-3:2014 Vacuum technology -- Vocabulary -- Part 3: Total and partial pressure vacuum gauges
    ISO 3567:2011 Vacuum gauges -- Calibration by direct comparison with a reference gauge
    ISO 3669:2017 Vacuum technology -- Bakeable flanges -- Dimensions of knife-edge flanges
    ISO 5302:2003 Vacuum technology -- Turbomolecular pumps -- Measurement of performance characteristics
    ISO 9803-1:2007 Vacuum technology -- Mounting dimensions of pipeline fittings -- Part 1: Non knife-edge flange type
    ISO 9803-2:2007 Vacuum technology -- Mounting dimensions of pipeline fittings -- Part 2: Knife-edge flange type
    ISO 14291:2012 Vacuum gauges -- Definitions and specifications for quadrupole mass spectrometers
    ISO 19685:2017 Vacuum technology -- Vacuum gauges -- Specifications* calibration and measurement uncertainties for Pirani gauges
    ISO 21358:2007 Vacuum technology -- Right-angle valve -- Dimensions and interfaces for pneumatic actuator
    ISO 21360-1:2012 Vacuum technology -- Standard methods for measuring vacuum-pump performance -- Part 1: General description
    ISO 21360-2:2012 Vacuum technology -- Standard methods for measuring vacuum-pump performance -- Part 2: Positive displacement vacuum pumps
    ISO 27892:2010 Vacuum technology -- Turbomolecular pumps -- Measurement of rapid shutdown torque
    ISO 27893:2011 Vacuum technology -- Vacuum gauges -- Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
    ISO 27894:2009 Vacuum technology -- Vacuum gauges -- Specifications for hot cathode ionization gauges
    ISO 27895:2009 Vacuum technology -- Valves -- Leak test


    complete

    [link Point to another website Only the registered members can access]


  12. #9

    Re: ISO Collection 52/300:ISO/TC 112 - Vacuum technology

    Thanks a lot

    My threads; azul11 :


    • #10

      Re: ISO Collection 52/300:ISO/TC 112 - Vacuum technology

      Thank you!

      My threads; dodol7 :


    • #11

      Re: ISO Collection 52/300:ISO/TC 112 - Vacuum technology

      TY very much, nice collection.

      My threads; CChris :


    •    Spons.


    •   

    Similar Threads

    1. Replies: 8
      Last Post: 12-24-2017, 08:11 PM
    2. Vacuum Technology in the Chemical Industry, PDF
      By dcisneros in forum Petrochemical
      Replies: 1
      Last Post: 11-28-2016, 04:06 PM
    3. Vacuum Technology in the Chemical Industry (2015)
      By irfan1sdk in forum General Engineering
      Replies: 0
      Last Post: 05-25-2015, 05:18 PM
    4. Basic Vacuum Technology
      By himanshu in forum Petrochemical
      Replies: 6
      Last Post: 03-09-2010, 04:11 AM
    5. High-Vacuum Technology (Mechanical Engineering (Marcell Dekker))
      By mkhurram79 in forum Mechanical Engineering
      Replies: 1
      Last Post: 10-25-2009, 05:59 PM

    Tags for this Thread

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •