Page 3 of 8 FirstFirst 1 2 3 4 5 ... LastLast
Results 25 to 36 of 94

Thread: AWS Codes, Publications....

  1. #25

  2. # ADS
    Spons Circuit
    Join Date
    Always
    Posts
    Many
     
  3. #26

  4.    Sponsored Links



    -

  5. Re: AWS Codes, Publications....

    Dear BornToSin,

    I am looking for AWS D1.8 2016 (Structural Welding Code Seismic Supplement) do you have? Thank you in advance

    My threads; martin kurniawan :


    • #28

      Re: AWS Codes, Publications....

      G1.2M/G1.2:1999 (R2010) Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics
      G1.6:2006 Specification for the Qualification of Plastics Welding Inspectors for Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds
      G1.10M:2016 Guide for the Evaluation of Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds

      GWF:1998 Guide for Setting Up a Welder Training

      Please upload if you have the above.
      Thanks in advance

      My threads; Kumanan :


      • #29

        Re: AWS Codes, Publications....

        Thank you very much. God bless you.

        My threads; NIKOLATESLA :


        •    Spons.


        • #30

          Re: AWS Codes* Publications....

          ok* a lot of updates thanx to Marty Thompson...
          again* only unbolded are missing:

          Aerospace
          D17.1/D17.1M:2010-AMD 1 Specification for Fusion Welding for Aerospace Applications
          D17.2/D17.2M:2013 Specification for Resistance Welding for Aerospace Applications
          D17.3/D17.3M:2016 Specification for Friction Stir Welding of Aluminum Alloys for Aerospace Applications


          Aluminium
          A5.3/A5.3M:1999 (R2007) Specification for Aluminum and Aluminum-Alloy Electrodes for Shielded Metal Arc Welding
          A5.10/A5.10M (ISO 18273 MOD):2012 Welding Consumables – Wire Electrodes* Wires and Rods for Welding of Aluminum and Aluminum-Alloys – Classification
          B2.1-22-015:2011 Standard Welding Procedure Specification (Aluminum)
          C3.7M/C3.7:2011 Specification for Aluminum Brazing
          D1.2/D1.2M:2014 Structural Welding Code – Aluminum
          D3.7:2004 Guide for Aluminum Hull Welding
          D8.14M:2008 Specification for Automotive Weld Quality—Arc Welding of Aluminum
          D10.7M/D10.7:2008 Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe
          D17.3/D17.3M:2016 Specification for Friction Stir Welding of Aluminum Alloys for Aerospace Applications
          PHB-8 The Everyday Pocket Handbook for Gas Metal Arc Welding (GMAW) of Aluminum
          WQA:2010 Welding Aluminum–Questions and Answers


          Automotive
          D8.1M:2013 Specification for Automotive Weld Quality – Resistance Spot Welding of Steel
          D8.8M:2014 Specification for Automotive Weld Quality – Arc Welding of Steel
          D8.9M:2012 Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials
          D8.14M:2008 Specification for Automotive Weld Quality—Arc Welding of Aluminum


          Brazing & Braze Welding
          A5.8M/A5.8-AMD 1:2011 Specification for Filler Metals for Brazing and Braze Welding
          A5.31M/A5.31:2012 Specification for Fluxes for Brazing and Braze Welding
          B2.2/B2.2M:2010 Specification for Brazing Procedure and Performance Qualification
          BRH:2007 Brazing Handbook
          C3.2M/C3.2:2008 Standard Method for Evaluating the Strength of Brazed Joints
          C3.3:2008 Recommended Practices for the Design* Manufacture* and Examination of Critical Brazed Components
          C3.4M/C3.4:2016 Specification for Torch Brazing
          C3.5M/C3.5:2016 Specification for Induction Brazing
          C3.6M/C3.6:2016 Specification for Furnace Brazing
          C3.7M/C3.7:2011 Specification for Aluminum Brazing
          C3.8M/C3.8:2011 Specification for the Pulse-Echo Ultrasonic Examination of Brazed Joints
          C3.9M/C3.9:2009 Specification for Resistance Brazing
          D10.13/D10.13M:2001 Recommended Practices for the Brazing of Copper Tubing and Fittings for Medical Gas Systems


          Bridges
          AASHTO/AWS D1.5:2015 Bridge Welding Code


          Carbon Steel
          A5.1/A5.1M:2012 Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
          A5.2/A5.2M:2007 Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding
          A5.17/A5.17M:1997 (R2007) Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding
          A5.18/A5.18M:2005 Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
          A5.20/A5.20M:2005 (R2015) Specification for Carbon Steel Electrodes for Flux Cored Arc Welding
          A5.25/A5.25M:1997 (R2009) Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding
          A5.26/A5.26M:1997 (R2009) Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding
          A5.36/A5.36M:2016 Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes for Metal Arc Welding

          GTW:2005 Guide to Weldability: Carbon and Low-Alloy Steels

          Cast Iron
          A5.15:1990 (R2016) Specification for Welding Electrodes and Rods for Cast Iron
          D11.2:1989 (R2006) Guide for Welding Iron Castings


          Certification
          CM:2000 Certification Manual for Welding Inspectors
          CMWS:2005 Certified Welding Supervisor Manual
          QC1:2007 Standard for AWS Certification of Welding Inspectors
          QC4:1989 Standard for Accreditation of Test Facilities for AWS Certified Welder Program
          QC5:1991 Standard for AWS Certification of Welding Educators
          QC7:1993 Standard for AWS Certified Welders
          QC7C:1993 Supplement C*Welder Performance Qualification Sheet Metal Test Requirements
          QC7F:1993 Supplement F* Chemical Plant and Petroleum Refinery Piping
          QC7G:1993 Supplement G* AWS Performance Qualification Test
          QC10:2008 Specification for Qualification and Registration of Level I — Entry Welders
          QC11:1996 Specification for Qualification and Certification for Level II — Advanced Welders
          QC12:1996 Specification for Qualification and Certification for Level III — Expert Welders
          QC13:2006 Specification for the Certification of Welding Supervisors
          QC14:2009 Specification for the Certification of Welding Sales Representatives
          QC15:2008 Specification for the Certification of Radiographic Interpreters

          QC17:2015 Specification for AWS Accreditation of Certified Welding Fabricators
          QC19:2002 Standard for the AWS Certification of Robotic Arc Welding Personnel
          QC20:2011 Standard for the AWS Certification of Resistance Welding Technicians
          QC47:2016 Specification for AWS Certification of Welders and Accreditation of Test Facilities


          Charts
          A2.1 WC:2012 Welding Symbol Charts
          A2.1 DC:2012 Welding Symbol Charts
          A3.1:2010 Master Chart of Welding and Joining Processes
          D1.1-SWJ-WC Welded Joint Details Wall Chart
          D18.2:2009 Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube
          F2.2:2001 (R2010) Lens Shade Selector


          Computerization
          A9.5:2013 Guide for Verification and Validation in Computation Weld Mechanics


          Corrosion Resistance
          C2.20/C2.20M:2002 Specification for Thermal Spraying Zinc Anodes on Steel Reinforced Concrete
          C2.23M/C2.23:2003 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum* Zinc* and Their Alloys and Composites for the Corrosion Protection of Steel
          PRGHF The Practical Reference Guide for Hardfacing


          Cutting
          A5.12M/A5.12 (ISO 6848 MOD):2009 Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting
          C4.6M (ISO 9013 IDT) :2006 (R2012) Thermal Cutting—Classification of Thermal Cuts—Geometric Product Specification and Quality Tolerances
          C5.3:2000 (R2011) Recommended Practices for Air Carbon Arc Gouging and Cutting
          C5.10/C5.10M :2003 Recommended Practices for Shielding Gases for Welding and Cutting
          C7.2:2010 Recommended Practices for Laser Beam Welding* Cutting* and Allied Processes
          F4.1:2007 Safe Practices for the Preparation of Containers and Piping for Welding and Cutting


          Design
          DPW:1997 Design and Planning Manual for Cost-Effective Welding
          FWSH:1997 Design Handbook for Calculating Fillet Weld Sizes


          Education & Training
          API-M:2008 Study Guide for API Standard 1104
          CCRM:2015 Code Clinic–Structural Welding Code – Steel

          CM:2000 Certification Manual for Welding Inspectors
          CMWS:2005 Certified Welding Supervisor Manual
          EG2.0:2008 Guide for Training and Qualification of Welding Personnel: Entry Welder
          EG3.0:2006 Guide for the Training and Qualification of Welding Personnel: Level II – Advanced Welders
          GWF:1998 Guide for Setting Up a Welder Training Facility
          QC5:1991 Standard for AWS Certification of Welding Educators
          WIT-T:2008 Welding Inspection Technology
          WIT-W:2008 Welding Inspection Technology Workbook


          Electrogas & Electroslag Welding
          Reference Title
          A5.25/A5.25M:1997 (R2009) Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding
          A5.26/A5.26M:1997 (R2009) Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding

          C5.7:2000 (R2006) Recommended Practices for Electrogas Welding

          Electron Beam Welding
          C7.1M/C7.1:2013 Recommended Practices for Electron Beam Welding and Allied Processes
          C7.3:2016 Process Specification for Electron Beam Welding


          Filler Metals & Fluxes
          A4.2M (ISO 8429 MOD):2006 (R2014) Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal
          A4.3:1993 (R2006) Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic*Bainitic* and Ferritic Steel Weld Metal Produced by Arc Welding
          A4.4M:2001 (R2006) Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings
          A4.5M/A4.5 (ISO 15792-3 MOD):2012 Standard Methods for Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld
          A5.01M/A5.01 (ISO 14344 MOD):2013 Welding Consumables–Procurement of Filler Metals and Fluxes
          A5.02/A5.02M:2007 Specification for Filler Metal Standard Sizes* Packaging* and Physical Attributes
          A5.1/A5.1M:2012 Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
          A5.2/A5.2M:2007 Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding
          A5.3/A5.3M:1999 (R2007) Specification for Aluminum and Aluminum-Alloy Electrodes for Shielded Metal Arc Welding
          A5.4/A5.4M:2012 Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding
          A5.5/A5.5M:2014 Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding
          A5.6/A5.6M:2008 Specification for Copper and Copper-Alloy Electrodes for Shielded Metal Arc Welding
          A5.7/A5.7M:2007 Specification for Copper and Copper-Alloy Bare Welding Rods and Electrodes
          A5.8M/A5.8-AMD 1:2011 Specification for Filler Metals for Brazing and Braze Welding
          A5.10/A5.10M (ISO 18273 MOD):2012 Welding Consumables – Wire Electrodes* Wires and Rods for Welding of Aluminum and Aluminum-Alloys – Classification
          A5.11/A5.11M:2010 Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding
          A5.12M/A5.12 (ISO 6848 MOD):2009 Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting
          A5.13/A5.13M:2010 Specification for Surfacing Electrodes for Shielded Metal Arc Welding
          A5.14/A5.14M:2011 Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods
          A5.15:1990 (R2016) Specification for Welding Electrodes and Rods for Cast Iron
          A5.16/A5.16M (ISO 24034 MOD):2013 Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods
          A5.17/A5.17M:1997 (R2007) Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding
          A5.18/A5.18M:2005 Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
          A5.19:1992 (R2016) Specification for Magnesium Alloy Welding Electrodes and Rods
          A5.20/A5.20M:2005 (R2015) Specification for Carbon Steel Electrodes for Flux Cored Arc Welding
          A5.21/A5.21M:2011 Specification for Bare Electrodes and Rods for Surfacing
          A5.22/A5.22M:2012 Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods
          A5.23/A5.23M:2011 Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding
          A5.24/A5.24M:2014 Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods
          A5.25/A5.25M:1997 (R2009) Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding
          A5.26/A5.26M:1997 (R2009) Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding
          A5.28/A5.28M:2005 (R2015) Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Metal Arc Welding
          A5.29/A5.29M:2010 Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding
          A5.30/A5.30M:2007 Specification for Consumable Inserts
          A5.31M/A5.31:2012 Specification for Fluxes for Brazing and Braze Welding
          A5.34/A5.34M:2013 Specification for Nickel-Alloy Electrodes for Flux Cored Arc Welding
          A5.35/A5.35M:2016 Specification for Covered Electrodes for Underwater Wet Shielded Metal Arc Welding

          A5.36/A5.36M:2016 Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes for Metal Arc Welding
          UGFM:2010 User’s Guide to Filler Metals

          Food Processing Systems
          D18.1:2009 Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygienic) Applications
          D18.2:2009 Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube
          D18.3/D18.3M:2015 Specification for Welding of Tanks* Vessels* and Other Equipment in Sanitary (Hygienic) Applications


          Friction Welding
          C6.1:1989 (R2009) Recommended Practices for Friction Welding
          C6.2/C6.2M:2006 Specification for Friction Welding of Metals
          D17.3/D17.3M:2016 Specification for Friction Stir Welding of Aluminum Alloys for Aerospace Applications


          GMAW
          PHB-4 Everyday Pocket Handbook for Gas Metal Arc Welding (GMAW) and Flux Cored Arc Welding (FCAW)
          PHB-8 Everyday Pocket Handbook for Gas Metal Arc Welding (GMAW) of Aluminum


          GTAW
          A5.22/A5.22M:2012 Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods for Gas Tungsten Arc Welding
          C5.5/C5.5M:2003 Recommended Practices for Gas Tungsten Arc Welding
          D10.6/D10.6M:2000 Recommended Practices for Gas Tungsten Arc Welding of Titanium Piping and Tubing


          Inspection
          B1.10M/B1.10:2016 Guide for the Nondestructive Examination of Welds
          B1.11:2015 Guide for the Visual Examination of Welds
          B4.0/B4.0M:2016 Standard Methods for Mechanical Testing of Welds
          C3.3:2008 Recommended Practices for the Design* Manufacture* and Examination of Critical Brazed Components
          C3.8M/C3.8:2011 Specification for the Pulse-Echo Ultrasonic Examination of Brazed Joints
          D18.2:2009 Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube
          G1.2M/G1.2:1999 (R2010) Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics
          G1.6:2006 Specification for the Qualification of Plastics Welding Inspectors for Hot Gas* Hot Gas Extrusion* and Heated Tool Butt Thermoplastic Welds
          PHB-2 Everyday Pocket Handbook for Visual Inspection and Weld Discontinuities —Causes and Remedies
          PHB-6 Everyday Pocket Handbook for Visual Inspection of AWS D1.1 Structural Welding Code’s Fabrication and Welding Requirements
          QC1:2007 Standard for AWS Certification of Welding Inspectors
          QC15:2008 Specification for the Certification of Radiographic Interpreters
          WI:2015 Welding Inspection Handbook
          WIT-T:2008 Welding Inspection Technology

          WIT-W:2008 Welding Inspection Technology Workbook

          Laser Beam Welding
          C7.2M:2010 Recommended Practices for Laser Beam Welding* Cutting* and Allied Processes
          C7.4/C7.4M:2008 Process Specification and Operator Qualification for Laser Beam Welding


          Machinery & Equipment
          C2.19/C2.19M:2013 Specification for the Application of Thermal Spray Coatings to Machine Elements for OEM & Repair
          D14.1/D14.1M:2005 Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment
          D14.3/D14.3M:2010-AMD1 Specification for Welding Earthmoving* Construction* and Agricultural Equipment
          D14.4/D14.4M:2012 Specification for Welded Joints in Machinery and Equipment
          D14.5/D14.5M:2009 Specification for Welding of Presses and Press Components
          D14.6/D14.6M:2012 Specification for Welding of Rotating Elements of Equipment
          D14.7/D14.7M:2005 Recommended Practices for Surfacing and Reconditioning of Industrial Mill Rolls
          D14.8M (ISO/TR 17844 IDT): 2009 Standard Methods for the Avoidance of Cold *****s
          D14.9/D14.9M:2013 Specification for Welding of Hydraulic Cylinders


          Management & Economics
          DPW Design and Planning Manual for Cost-Effective Welding

          TIH-H The Industrial Hobarts
          TWM Total Welding Management

          Marine
          C2.19/C2.19M:2013 Specification for the Application of Thermal Spray Coatings to Machine Elements for OEM & Repair
          D3.5:1993 Guide for Steel Hull Welding
          D3.6M:2010 Underwater Welding Code
          D3.7:2004 Guide for Aluminum Hull Welding
          D3.9:2010 Specification for Classification of Weld-Through Paint Primers


          Metallurgy
          PRGWM The Practical Reference Guide to Welding Metallurgy: Key Concepts for Weldability

          WM1.4 Welding Metallurgy* Carbon and Alloy Steels* Volume 1* Fundamentals

          Nickel
          G2.1M/G2.1:2012 Guide for the Joining of Wrought Nickel-Based Alloys


          Oxyfuel Welding & Cutting
          C4.1:1977 (R2010) Criteria for Describing Oxygen-Cut Surfaces* and Oxygen Cutting Surface Roughness Gauge
          C4.2/C4.2M:2009 Recommended Practices for Safe Oxyfuel Gas Cutting Torch Operation
          C4.3/C4.3M:2007 Recommended Practices for Safe Oxyfuel Gas Heating Torch Operation
          C4.4/C4.4M:2007 Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating Torches
          C4.5M:2012 Uniform Designation System for Oxyfuel Nozzles
          C4.6M:2006 (R2012) Thermal Cutting – Classification of Thermal Cuts – Geometric Product Specification and Quality Tolerances


          Piping & Tubing
          D10.4:1986 Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing
          D10.6/D10.6M:2000 Recommended Practices for Gas Tungsten Arc Welding of Titanium Piping and Tubing
          D10.7M/D10.7:2008 Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe
          D10.8:1996 Recommended Practices for Welding of Chromium-Molybdenum Steel Piping and Tubing
          D10.10/D10.10M:1999 (R2009) Recommended Practices for Local Heating of Welds in Piping and Tubing
          D10.11M/D10.11:2007 Guide for Root Pass Welding of Pipe Without Backing
          D10.12M/D10.12:2000 Guide for Welding Mild Steel Pipe
          D10.13/D10.13M:2001 Recommended Practices for the Brazing of Copper Tubing and Fittings for Medical Gas Systems
          D10.14M/D10.14:2010 Guide for Multipass Orbital Machine Pipe Groove Welding
          D10.18M/D10.18:2008 Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and Tubing
          D18.1:2009 Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygienic) Applications
          D18.2:2009 Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube
          F4.1:2007 Safe Practices for the Preparation of Containers and Piping for Welding and Cutting


          Plastics
          B2.4:2012 Specification for Welding Procedure and Performance Qualification for Thermoplastics
          G1.1M/G1.1:2006 Guide to Ultrasonic Assembly of Thermoplastics
          G1.2M/G1.2:1999 (R2010) Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics
          G1.6:2006 Specification for the Qualification of Plastics Welding Inspectors for Hot Gas* Hot Gas Extrusion* and Heated Tool Butt Thermoplastic Welds

          G1.10M:2016 Guide for the Evaluation of Hot Gas* Hot Gas Extrusion* and Heated Tool Butt Thermoplastic Welds


          Qualification Procedures & Personnel
          B2.1/B2.1M:2014 Specification for Welding Procedure and Performance Qualification
          B2.1/B2.1M-BMG:2014 Base Metal Grouping for Welding Procedure and Performance Qualification
          B2.2/B2.2M:2010 Specification for Brazing Procedure and Performance Qualification
          B2.3/B2.3M:2012 Specification for Soldering Procedure and Performance Qualification
          B2.4:2012 Specification for Welding Procedure and Performance Qualification for Thermoplastics
          B5.1:2013 Specification for the Qualification of Welding Inspectors
          B5.2:2001 Specification for the Qualification of Welding Inspector Specialists and Welding Inspector Assistants
          B5.4:2005 Specification for the Qualification of Welder Test Facilities
          B5.5:2011 Specification for the Qualification of Welding Educators
          B5.9:2006 Specification for the Qualification of Welding Supervisors
          B5.14:2009 Specification for the Qualification of Welding Sales Representatives
          B5.15:2010 Specification for the Qualification of Radiographic Interpreters
          B5.16:2006 Specification for the Qualification of Welding Engineers
          B5.17:2014 Specification for the Qualification of Welding Fabricators
          C1.5:2015 Specification for the Qualification of Resistance Welding Technicians
          C2.16/C2.16M:2002 Guide for Thermal-Spray Operator Qualification
          C7.4/C7.4M:2008 Process Specification and Operator Qualification for Laser Beam Welding
          D16.4M/D16.4:2015 Specification for the Qualification of Robotic Arc Welding Personnel
          G1.6:2006 Specification for the Qualification of Plastics Welding Inspectors for Hot Gas* Hot Gas Extrusion* and Heated Tool Butt Thermoplastic Welds

          PAPQV The Professional’s Advisor on Procedure Qualification Variables

          Radiography
          B5.15:2010 Specification for the Qualification of Radiographic Interpreters
          QC15:2008 Specification for the Certification of Radiographic Interpreters


          Railroads
          D15.1/D15.1M:2012-AMD1 Railroad Welding Specification for Cars and Locomotives
          D15.2/D15.2M:2013 Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail Vehicles


          Reference
          A1.1:2001 Metric Practice Guide for the Welding Industry

          A2.1 WC:2012 Welding Symbol Charts
          A2.1 DC:2012 Welding Symbol Charts
          A2.4:2012 Standard Symbols for Welding* Brazing* and Nondestructive Examination
          A3.0M/A3.0:2010 Standard Welding Terms and Definitions

          A3.1:2010 Master Chart of Welding and Joining Processes
          JWE Jefferson’s Welding Encyclopedia
          PHB-5 The Everyday Pocket Handbook on Metric Practices for the Welding Industry
          PPGHF The Practical Reference Guide for Hardfacing
          PRGP Practical Reference Guide to Positioning

          TIH-H The Industrial Hobarts
          TWM Total Welding Management
          WHB-1-9 Welding Handbook Ninth Edition* Volume 1* Welding Science and Technology
          WHB-2-9 Welding Handbook Ninth Edition* Volume 2* Welding Processes* Part 1
          WHB-3-9 Welding Handbook Ninth Edition* Volume 3* Welding Processes* Part 2
          WHB-4-9 Welding Handbook Ninth Edition* Volume 4* Materials and Applications* Part 1
          WHB-5-9 Welding Handbook Ninth Edition* Volume 5* Materials and Applications* Part 2


          Resistance Welding
          A1.10M:2007 Specification for Calibration and Performance testing of Secondary Current Sensing Coils and Weld Monitors used in Single-Phase AC Resistance Welding
          C1.1M/C1.1:2012 Recommended Practices for Resistance Welding
          C1.4M/C1.4:2009 Specification for Resistance Welding of Carbon and Low-Alloy Steels
          C1.5:2015 Specification for the Qualification of Resistance Welding Technicians
          C3.9M/C3.9:2009 Specification for Resistance Brazing
          D8.1M:2013 Specification for Automotive Weld Quality – Resistance Spot Welding of Steel
          D8.9M:2012 Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials
          D17.2/D17.2M:2013 Specification for Resistance Welding for Aerospace Applications
          J1.1M/J1.1:2013 Specification for Resistance Welding Controls
          J1.2M/J1.2;2016 Guide to Installation and Maintenance of Resistance Welding Machines

          RWM Resistance Welding Manual
          RWPH Resistance Welding Pocket Handbook
          QC20:2011 Standard for the AWS Certification of Resistance Welding Technicians


          Robotic Welding
          D16.1M/D16.1:2004 Specification for Robotic Arc Welding Safety
          D16.2M/16.2:2007 Guide for Components of Robotic and Automatic Arc Welding Installations
          D16.3M/ D16.3:2009 Risk Assessment Guide for Robotic Arc Welding
          D16.4M/D16.4:2015 Specification for the Qualification of Robotic Arc Welding Personnel
          PRGP Practical Reference Guide to Positioning
          QC19:2002 Standard for the AWS Certification of Robotic Arc Welding Personnel


          Health & Safety
          D16.3M/ D16.3:2009 Risk Assessment Guide for Robotic Arc Welding
          EWH-1 thru 14 Effects of Welding on Health* Vol. I through XIV
          F1.1M:2006 Method for Sampling Airborne Particulates Generated by Welding and Allied Processes
          F1.2:2013 Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission of Welding and Allied Processes
          F1.3:2006 A Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment
          F1.6:2003 Guide for Estimating Welding Emissions for EPA and Ventilation Permit Reporting
          F2.2:2001 (R2010) Lens Shade Selector
          F2.3M:2011 Specification for Use and Performance of Transparent Welding Curtains and Screens
          F3.2M/F3.2:2001 Ventilation Guide for Weld Fume
          F4.1:2007 Safe Practices for the Preparation of Containers and Piping for Welding and Cutting
          FUMES AND GASES Fumes and Gases in the Welding Environment
          Z49.1:2012 Safety in Welding* Cutting* and Allied Processes


          Sheet Metal
          D1.3/D1.3M:2008 Structural Welding Code—Sheet Steel
          D8.9M:2012 Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials
          D9.1M/D9.1:2012 Sheet Metal Welding Code


          SMAW
          PHB-7 The Everyday Pocket Handbook for Shielded Metal Arc Welding (SMAW)


          Shielding Gases
          A5.32M/A5.32 (ISO 14175 MOD):2011 Welding Consumables – Gases & Gas Mixtures for Fusion Welding and Allied Processes
          C5.10/C5.10M :2003 Recommended Practices for Shielding Gases for Welding and Cutting


          Soldering
          SHB Soldering Handbook
          GHSP Guideline for Hand Soldering Practices
          B2.3/B2.3M:2012 Specification for Soldering Procedure and Performance Qualification
          C3.11M/C3.11:2011 Specification for Torch Soldering


          Stainless Steel
          A4.2M (ISO 8429 MOD):2006 (R2014) Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal
          A5.4/A5.4M:2012 Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding
          A5.9/A5.9M:2012 Specification for Bare Stainless Steel Welding Electrodes and Rods
          A5.22/A5.22M:2012 Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods
          D1.6/D1.6M:2007 Structural Welding Code—Stainless Steel
          D10.4:1986 Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing
          D10.18M/D10.18:2008 Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and Tubing
          D18.1:2009 Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygienic) Applications
          D18.2:2009 Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube

          G2.3M/G2.3:2012 Guide for the Joining of Solid Solution Austenitic Stainless Steels
          PASS The Professional’s Advisor on Welding of Stainless Steels
          WQS Welding Stainless Steel—Questions and Answers


          Steel
          D1.1/D1.1M:2015 Structural Welding Code-Steel
          PHB-1 The Everyday Pocket Handbook for Arc Welding Steel


          Structural Welding
          D1.1/D1.1M:2015 Structural Welding Code-Steel
          D1.1 CCRM:2015 Code Clinic for Study of AWS D1.1 Structural Welding Code—Steel* Reference Manual

          D1.1-SWJ-WC Welded Joint Details Wall Chart
          D1.2/D1.2M:2014 Structural Welding Code – Aluminum
          D1.3/D1.3M:2008 Structural Welding Code—Sheet Steel
          D1.4/D1.4M:2011 Structural Welding Code—Reinforcing Steel
          D1.5M/D1.5:2015 Bridge Welding Code
          D1.6/D1.6M:2007 Structural Welding Code—Stainless Steel
          D1.7/D1.7M:2010 Guide to Repair and Strengthening of Existing Structures
          D1.8/D1.8M:2016 Structural Welding Code—Seismic Supplement
          D1.9/D1.9M:2015 Structural Welding Code—Titanium
          PHB-3 The Everyday Pocket Handbook on Welded Joint Details for Structural Applications
          PHB-6 The Everyday Pocket Handbook for Visual Inspection of D1.1 Structural Welding Code’s Fabrication & Welding Requirements


          Stud Welding
          D1.1/D1.1M:2015 Structural Welding Code-Steel
          D1.2/D1.2M:2014 Structural Welding Code – Aluminum
          D1.5M/D1.5:2015 Bridge Welding Code
          D1.6/D1.6M:2007 Structural Welding Code—Stainless Steel


          Surfacing
          A5.13/A5.13M:2010 Specification for Surfacing Electrodes for Shielded Metal Arc Welding
          A5.21/A5.21M:2011 Specification for Bare Electrodes and Rods for Surfacing


          Symbols
          A2.4:2012 Standard Symbols for Welding* Brazing* and Nondestructive Examination


          Terminology
          A3.0M/A3.0:2010 Standard Welding Terms and Definitions


          Thermal Spraying
          C2.16/C2.16M:2002 Guide for Thermal-Spray Operator Qualification
          C2.18:1993 Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and Their Alloys and Composites
          C2.19/C2.19M:2013 Specification for the Application of Thermal Spray Coatings to Machine Elements for OEM & Repair
          C2.20/C2.20M:2002 Specification for Thermal Spraying Zinc Anodes on Steel Reinforced Concrete
          C2.21M/C2.21:2015 Specification for Thermal Spray Equipment Acceptance Inspection
          C2.23M/C2.23:2003 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum* Zinc* and Their Alloys and Composites for the Corrosion Protection of Steel
          C2.25/C2.25M:2012 Specification for Thermal Spray Feedstock — Wire and Rods

          TSM Thermal Spray Manual
          TSS Thermal Spraying Practice* Theory and Application
          TST ASM Handbook Volume 5A: Thermal Spray Technology


          Thermite Welding
          D15.2/D15.2M:2013 Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail Vehicles


          Titanium
          A5.16/A5.16M (ISO 24034 MOD):2013 Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods
          D1.9/D1.9M:2015 Structural Welding Code—Titanium
          D10.6/D10.6M:2000 Recommended Practices for Gas Tungsten Arc Welding of Titanium Piping and Tubing
          G2.4/G2.4M:2014 Guide for the Fusion Welding of Titanium and Titanium Alloys


          Welding Curtains & Screens
          F2.3M:2011 Specification for Use and Performance of Transparent Welding Curtains and Screens


          Zinc Coatings
          WZC Welding Zinc-Coated Steels


          Zirconium
          A5.24/A5.24M:2014 Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods
          G2.5/G2.5M:2012 Guide for the Fusion Welding of Zirconium and Zirconium Alloys


          new link:

          [link Point to another website Only the registered members can access]


        • #31

        • #32

        • #33

          Re: AWS Codes* Publications....

          AWS G2.3 G2.3M-2012 Guide for the Joining of Solid Solution Austenitic Stainless Steels

          [link Point to another website Only the registered members can access]


        • #34

          Re: AWS Codes* Publications....

          It is not A1.10M:2007
          The correct number is A10.1
          AWS A10.1M-2007 Calibration and Performance Testing of Secondary Current Sensing Coils and Weld Current Monitors used in Single-Phase AC Resistance Welding

        • #35

        •    Spons.


        • #36

        •   

        Similar Threads

        1. Publications Required
          By mdjaved91 in forum Safety And Environment
          Replies: 0
          Last Post: 08-12-2015, 04:35 AM
        2. EEMUA Publications
          By Guniawala in forum Safety And Environment
          Replies: 1
          Last Post: 05-31-2015, 04:06 AM
        3. API New Standard Publications
          By Shabbir2009 in forum Pipeline And Fluid Flow
          Replies: 2
          Last Post: 03-10-2015, 08:06 AM
        4. Energy institue publications model codes related to electrical safety required
          By ANANDAN4172 in forum Electrical & Power Engineering
          Replies: 0
          Last Post: 04-01-2014, 10:56 AM
        5. Replies: 50
          Last Post: 06-30-2011, 05:22 AM

        Tags for this Thread

        Bookmarks

        Posting Permissions

        • You may not post new threads
        • You may not post replies
        • You may not post attachments
        • You may not edit your posts
        •