Page 1 of 2 1 2 LastLast
Results 1 to 12 of 15

Thread: CEN Standards Collection 120/370: CEN TC 211 - Acoustics

  1. #1

    CEN Standards Collection 120/370: CEN TC 211 - Acoustics

    complete

    EN ISO 266:1997 Acoustics - Preferred frequencies (ISO 266:1997)
    EN ISO 389-1:2000 Acoustics - Reference zero for the calibration of audiometric equipment - Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:1998)
    EN ISO 389-2:1996 Acoustics - Reference zero for the calibration of audiometric equipment - Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones (ISO 389-2:1994)
    EN ISO 389-3:1998 Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators (ISO 389-3:1994)
    EN ISO 389-4:1998 Acoustics - Reference zero for the calibration of audiometric equipment - Part 4: Reference levels for narrow-band masking noise (ISO 389-4:1994)
    EN ISO 389-5:2006 Acoustics - Reference zero for the calibration of audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz (ISO 389-5:2006)
    EN ISO 389-6:2007 Acoustics - Reference zero for the calibration of audiometric equipment - Part 6: Reference threshold of hearing for test signals of short duration (ISO 389-6:2007)
    EN ISO 389-7:2005 Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO 389-7:2005)
    EN ISO 389-8:2004 Acoustics - Reference zero for the calibration of audiometric equipment - Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones (ISO 389-8:2004)
    EN ISO 389-9:2009 Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO 389-9:2009)
    EN ISO 1680:2013 Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)
    EN ISO 1683:2015 Acoustics - Preferred reference values for acoustical and vibratory levels (ISO 1683:2015)
    EN 1746:1998 Safety of machinery - Guidance for the drafting of the noise clauses of safety standards
    EN ISO 2922:2000 Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000)
    EN ISO 2922:2000/A1:2013 Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000)
    EN ISO 3740:2000 Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000)
    EN ISO 3741:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)
    EN ISO 3743-1:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)
    EN ISO 3743-2:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)
    EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
    EN ISO 3745:2012 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)
    EN ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
    EN ISO 3747:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
    EN ISO 4869-2:1995 Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994)
    EN ISO 4869-2:1995/AC:2007 Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994)
    EN ISO 4869-3:2007 Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007)
    EN ISO 4869-4:2000 Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs (ISO/TR 4869-4:1998)
    EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
    EN ISO 5135:1998 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997)
    EN ISO 5136:2009 Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)
    EN ISO 6926:2001 Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2000)
    EN ISO 7029:2000 Acoustics - Statistical distribution of hearing threshold as a function of age (ISO 7029:2000)
    EN ISO 7235:2009 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
    EN ISO 7779:2010 Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:2010)
    EN ISO 8253-1:2010 Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010)
    EN ISO 8253-2:2009 Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure-tone and narrow-band test signals (ISO 8253-2:2009)
    EN ISO 8253-3:2012 Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2012)
    EN ISO 9295:2015 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment (ISO 9295:2015)
    EN ISO 9612:2009 Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009)
    EN ISO 9614-1:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)
    EN ISO 9614-2:1996 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996)
    EN ISO 9614-3:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)
    EN ISO 10846-1:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008)
    EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008)
    EN ISO 10846-3:2002 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002)
    EN ISO 10846-4:2003 Acoustics and vibration - Laboratory measurement of vibro-acyustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion (ISO 10846-4:2003)
    EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5
    EN ISO 11200:2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
    EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 1
    EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
    EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
    EN ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
    EN ISO 11205:2009 Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)
    EN ISO 11546-1:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
    EN ISO 11546-2:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
    EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
    EN ISO 11688-2:2000 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998)
    EN ISO 11689:1996 Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996)
    EN ISO 11689:1996/AC:2009 Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996)
    EN ISO 11690-1:1996 Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:1996)
    EN ISO 11690-2:1996 Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:1996)
    EN ISO 11690-3:1998 Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms (ISO/TR 11690-3:1997)
    EN ISO 11691:2009 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995)
    EN ISO 11820:1996 Acoustics - Measurements on silencers in situ (ISO 11820:1996)
    EN ISO 11821:1997 Acoustics - Measurement of the in situ sound attenuation of a removable screen (ISO 11821:1997)
    EN ISO 11904-1:2002 Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 1: Technique using a microphone in a real ear (MIRE technique) (ISO 11904-1:2002)
    EN ISO 11904-2:2004 Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin (ISO 11904-2:2004)
    EN ISO 11957:2009 Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)
    EN ISO 12001:2009 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
    EN ISO 14163:1998 Acoustics - Guidelines for noise control by silencers (ISO 14163:1998)
    EN ISO 14257:2001 Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001)
    EN ISO 15667:2000 Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000)
    EN ISO 17201-1:2005 Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2005)
    EN ISO 17201-1:2005/AC:2009 Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2005)
    EN ISO 17201-2:2006 Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast and projectile sound by calculation (ISO 17201-2:2006)
    EN ISO 17201-3:2010 Acoustics - Noise from shooting ranges - Part 3: Guidelines for sound propagation calculations (ISO 17201-3:2010)
    EN ISO 17201-4:2006 Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound (ISO 17201-4:2006)
    EN ISO 17201-5:2010 Acoustics - Noise from shooting ranges - Part 5: Noise management (ISO 17201-5:2010)
    EN 24869-1:1992 Acoustics - Hearing protectors - Subjective method for the measurement of sound attenuation (ISO 4869-1:1990)
    EN 27574-1:1988 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1: General considerations and definitions (ISO 7574-1:1985)
    EN 27574-2:1988 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 2: Methods for stated values for individual machines (ISO 7574-2:1985)
    EN 27574-3:1988 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 3: Simple (transition) method for stated values for batches of machines (ISO 7574-3:1985)
    EN 27574-4:1988 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 4: Methods for stated values for batches of machines (ISO 7574-4:1985)
    EN ISO 80000-8:2007 Quantities and units - Part 8: Acoustics (ISO 80000-8:2007, corrected 2007-08-15)


    [link Point to another website Only the registered members can access] or

    [link Point to another website Only the registered members can access]


    See More: CEN Standards Collection 120/370: CEN TC 211 - Acoustics

  2. # ADS
    Spons Circuit
    Join Date
    Always
    Posts
    Many
     
  3. #2

  4.    Sponsored Links



    -

  5. #3

    Re: CEN Standards Collection 120/300: CEN TC 211 - Acoustics

    update:

    EN ISO 389-3:2016 Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators (ISO 389-3:2016) - added new version of standard
    EN ISO 6926:2016 Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016) - added new version of standard


    sector complete

    [link Point to another website Only the registered members can access]
    or

    [link Point to another website Only the registered members can access]


  6. #4

    Re: CEN Standards Collection 120/340: CEN TC 211 - Acoustics

    Nothing changed, everything still here

    [link Point to another website Only the registered members can access] or

    [link Point to another website Only the registered members can access]


  7. #5

    Re: CEN Standards Collection 120/340: CEN TC 211 - Acoustics

    missing new one:

    EN ISO 389-7:2005/A1:2016 Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions - Amendment 1: Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions (ISO 389-7:2005/Amd 1:2016)


    new links:

    [link Point to another website Only the registered members can access]
    or

    [link Point to another website Only the registered members can access]


  8.    Spons.


  9. #6

    Re: CEN Standards Collection 120/350: CEN TC 211 - Acoustics

    update:

    EN ISO 389-7:2005/A1:2016 Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions - Amendment 1: Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field - added missing AMD

    sector complete again

    new links:

    [link Point to another website Only the registered members can access]
    or

    [link Point to another website Only the registered members can access]


  10. #7

    Re: CEN Standards Collection 120/370: CEN TC 211 - Acoustics

    one new is missing:

    EN ISO 7029:2017 Acoustics - Statistical distribution of hearing thresholds related to age and gender (ISO 7029:2017)


    fresh link:

    [link Point to another website Only the registered members can access]


  11. #8

    Re: CEN Standards Collection 120/370: CEN TC 211 - Acoustics

    update...better quality/EN versions/missing ones:


    EN ISO 389-2:1996 Acoustics - Reference zero for the calibration of audiometric equipment - Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones (ISO 389-2:1994)
    EN ISO 389-3:2016 Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators (ISO 389-3:2016)
    EN ISO 389-4:1998 Acoustics - Reference zero for the calibration of audiometric equipment - Part 4: Reference levels for narrow-band masking noise (ISO 389-4:1994)
    EN ISO 389-5:2006 Acoustics - Reference zero for the calibration of audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz (ISO 389-5:2006)
    EN ISO 389-6:2007 Acoustics - Reference zero for the calibration of audiometric equipment - Part 6: Reference threshold of hearing for test signals of short duration (ISO 389-6:2007)
    EN ISO 389-7:2005/A1:2016 Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions - Amendment 1: Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field
    EN ISO 389-8:2004 Acoustics - Reference zero for the calibration of audiometric equipment - Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones (ISO 389-8:2004)
    EN ISO 389-9:2009 Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO 389-9:2009)
    EN ISO 1683:2015 Acoustics - Preferred reference values for acoustical and vibratory levels (ISO 1683:2015)
    EN ISO 4869-2:1995 Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994)
    EN ISO 4869-4:2000 Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs (ISO/TR 4869-4:1998)
    EN ISO 6926:2016 Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016)
    EN ISO 8253-1:2010 Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010)
    EN ISO 8253-3:2012 Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2012)
    EN ISO 9295:2015 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment (ISO 9295:2015)
    EN 27574-1:1988 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1: General considerations and definitions (ISO 7574-1:1985)
    EN 27574-2:1988 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 2: Methods for stated values for individual machines (ISO 7574-2:1985)
    EN 27574-3:1988 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 3: Simple (transition) method for stated values for batches of machines (ISO 7574-3:1985)
    EN 27574-4:1988 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 4: Methods for stated values for batches of machines (ISO 7574-4:1985)


    we now missiing here:

    EN ISO 3745:2012/A1:2017 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms - Amendment 1 (ISO 3745:2012/Amd 1:2017)
    EN ISO 7029:2017 Acoustics - Statistical distribution of hearing thresholds related to age and gender (ISO 7029:2017)


    [link Point to another website Only the registered members can access]


  12. #9

    Re: CEN Standards Collection 120/370: CEN TC 211 - Acoustics

    EN ISO 7029:2017 Acoustics - Statistical distribution of hearing thresholds related to age and gender (ISO 7029:2017)

    [link Point to another website Only the registered members can access]


  13. #10

    Re: CEN Standards Collection 120/370: CEN TC 211 - Acoustics

    full list 29.10.2017.

    EN ISO 266:1997 Acoustics - Preferred frequencies (ISO 266:1997)
    EN ISO 389-1:2000 Acoustics - Reference zero for the calibration of audiometric equipment - Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:1998)
    EN ISO 389-2:1996 Acoustics - Reference zero for the calibration of audiometric equipment - Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones (ISO 389-2:1994)
    EN ISO 389-3:2016 Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators (ISO 389-3:2016)
    EN ISO 389-4:1998 Acoustics - Reference zero for the calibration of audiometric equipment - Part 4: Reference levels for narrow-band masking noise (ISO 389-4:1994)
    EN ISO 389-5:2006 Acoustics - Reference zero for the calibration of audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz (ISO 389-5:2006)
    EN ISO 389-6:2007 Acoustics - Reference zero for the calibration of audiometric equipment - Part 6: Reference threshold of hearing for test signals of short duration (ISO 389-6:2007)
    EN ISO 389-7:2005 Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO 389-7:2005)
    EN ISO 389-7:2005/A1:2016 Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions - Amendment 1: Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field
    EN ISO 389-8:2004 Acoustics - Reference zero for the calibration of audiometric equipment - Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones (ISO 389-8:2004)
    EN ISO 389-9:2009 Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO 389-9:2009)
    EN ISO 1680:2013 Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)
    EN ISO 1683:2015 Acoustics - Preferred reference values for acoustical and vibratory levels (ISO 1683:2015)
    EN 1746:1998 Safety of machinery - Guidance for the drafting of the noise clauses of safety standards
    EN ISO 2922:2000 Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000)
    EN ISO 2922:2000/A1:2013 Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000)
    EN ISO 3740:2000 Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000)
    EN ISO 3741:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)
    EN ISO 3743-1:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)
    EN ISO 3743-2:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)
    EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
    EN ISO 3745:2012 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)
    EN ISO 3745:2012/A1:2017 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms - Amendment 1 (ISO 3745:2012/Amd 1:2017)
    EN ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
    EN ISO 3747:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
    EN ISO 4869-2:1995 Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994)
    EN ISO 4869-2:1995/AC:2007 Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994)
    EN ISO 4869-3:2007 Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007)
    EN ISO 4869-4:2000 Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs (ISO/TR 4869-4:1998)
    EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
    EN ISO 5135:1998 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997)
    EN ISO 5136:2009 Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)
    EN ISO 6926:2016 Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016)
    EN ISO 7029:2017 Acoustics - Statistical distribution of hearing thresholds related to age and gender (ISO 7029:2017)
    EN ISO 7235:2009 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
    EN ISO 7779:2010 Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:2010)
    EN ISO 8253-1:2010 Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010)
    EN ISO 8253-2:2009 Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure-tone and narrow-band test signals (ISO 8253-2:2009)
    EN ISO 8253-3:2012 Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2012)
    EN ISO 9295:2015 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment (ISO 9295:2015)
    EN ISO 9612:2009 Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009)
    EN ISO 9614-1:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)
    EN ISO 9614-2:1996 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996)
    EN ISO 9614-3:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)
    EN ISO 10846-1:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008)
    EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008)
    EN ISO 10846-3:2002 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002)
    EN ISO 10846-4:2003 Acoustics and vibration - Laboratory measurement of vibro-acyustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion (ISO 10846-4:2003)
    EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5
    EN ISO 11200:2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
    EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 1
    EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
    EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
    EN ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
    EN ISO 11205:2009 Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)
    EN ISO 11546-1:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
    EN ISO 11546-2:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
    EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
    EN ISO 11688-2:2000 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998)
    EN ISO 11689:1996 Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996)
    EN ISO 11689:1996/AC:2009 Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996)
    EN ISO 11690-1:1996 Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:1996)
    EN ISO 11690-2:1996 Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:1996)
    EN ISO 11690-3:1998 Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms (ISO/TR 11690-3:1997)
    EN ISO 11691:2009 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995)
    EN ISO 11820:1996 Acoustics - Measurements on silencers in situ (ISO 11820:1996)
    EN ISO 11821:1997 Acoustics - Measurement of the in situ sound attenuation of a removable screen (ISO 11821:1997)
    EN ISO 11904-1:2002 Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 1: Technique using a microphone in a real ear (MIRE technique) (ISO 11904-1:2002)
    EN ISO 11904-2:2004 Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin (ISO 11904-2:2004)
    EN ISO 11957:2009 Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)
    EN ISO 12001:2009 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
    EN ISO 14163:1998 Acoustics - Guidelines for noise control by silencers (ISO 14163:1998)
    EN ISO 14257:2001 Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001)
    EN ISO 15667:2000 Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000)
    EN ISO 17201-1:2005 Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2005)
    EN ISO 17201-1:2005/AC:2009 Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2005)
    EN ISO 17201-2:2006 Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast and projectile sound by calculation (ISO 17201-2:2006)
    EN ISO 17201-3:2010 Acoustics - Noise from shooting ranges - Part 3: Guidelines for sound propagation calculations (ISO 17201-3:2010)
    EN ISO 17201-4:2006 Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound (ISO 17201-4:2006)
    EN ISO 17201-5:2010 Acoustics - Noise from shooting ranges - Part 5: Noise management (ISO 17201-5:2010)
    EN 24869-1:1992 Acoustics - Hearing protectors - Subjective method for the measurement of sound attenuation (ISO 4869-1:1990)
    EN 27574-1:1988 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1: General considerations and definitions (ISO 7574-1:1985)
    EN 27574-2:1988 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 2: Methods for stated values for individual machines (ISO 7574-2:1985)
    EN 27574-3:1988 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 3: Simple (transition) method for stated values for batches of machines (ISO 7574-3:1985)
    EN 27574-4:1988 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 4: Methods for stated values for batches of machines (ISO 7574-4:1985)
    EN ISO 80000-8:2007 Quantities and units - Part 8: Acoustics (ISO 80000-8:2007, corrected 2007-08-15)



    complete

    [link Point to another website Only the registered members can access]


  14. Re: CEN Standards Collection 120/370: CEN TC 211 - Acoustics

    invalid or Deleted File.

    The key you provided for file access was invalid. This is usually caused because the file is no longer stored on MediaFire. This occurs when the file is removed by the originating user or MediaFire.

    Please upload el link again.

    Thank you

  15.    Spons.


  16. Re: CEN Standards Collection 120/370: CEN TC 211 - Acoustics

    Quote Originally Posted by vihuvipe View Post
    invalid or Deleted File.

    The key you provided for file access was invalid. This is usually caused because the file is no longer stored on MediaFire. This occurs when the file is removed by the originating user or MediaFire.

    Please upload el link again.

    Thank you
    BornToSin , please new link!!

  •   

Similar Threads

  1. Replies: 2
    Last Post: 07-29-2017, 03:33 AM
  2. CEN Standards collection - Missing standards
    By BornToSin in forum Mechanical Engineering
    Replies: 0
    Last Post: 03-24-2017, 12:08 AM
  3. Replies: 0
    Last Post: 12-31-2016, 04:12 AM
  4. ISO 3746 - Acoustics -- Determination of sound power levels and...
    By kookuei in forum Safety And Environment
    Replies: 6
    Last Post: 10-02-2016, 10:08 PM
  5. Acoustics - L. Beranek
    By dongono in forum General Engineering
    Replies: 0
    Last Post: 01-02-2015, 04:45 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •