Page 1 of 2 1 2 LastLast
Results 1 to 12 of 18
  1. #1

    CEN Standards Collection 110/370: CEN TC 185 - Fasteners

    full list:

    EN ISO 225:2010 Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010)
    EN ISO 887:2000 Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000)
    EN ISO 887:2000/AC:2006 Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000)
    EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
    EN ISO 898-1:2013/AC:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread - Technical Corrigendum 1 (ISO 898-1:2013/Cor 1:2013)
    EN ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
    EN ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
    EN ISO 1207:2011 Slotted cheese head screws - Product grade A (ISO 1207:2011)
    EN ISO 1234:1997 Split pins (ISO 1234:1997)
    EN ISO 1478:1999 Tapping screws thread (ISO 1478:1999)
    EN ISO 1479:2011 Hexagon head tapping screws (ISO 1479:2011)
    EN ISO 1481:2011 Slotted pan head tapping screws (ISO 1481:2011)
    EN ISO 1482:2011 Slotted countersunk (flat) head tapping screws (ISO 1482:2011)
    EN ISO 1483:2011 Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)
    EN 1661:1997 Hexagon nuts with flange (ISO/DIS 4161:1996, modified)
    EN 1661:1997/AC:1998 Hexagon nuts with flange (ISO/DIS 4161:1996, modified)
    EN 1662:1997 Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)
    EN 1662:1997/AC:2007 Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)
    EN 1663:1997 Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified)
    EN 1664:1997 Prevailing torque type all-metal hexagon nuts with flange (ISO 7044:1997, modified)
    EN 1665:1997 Hexagon bolts with flange - Heavy series
    EN 1665:1997/AC:2007 Hexagon bolts with flange - Heavy series
    EN 1666:1997 Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread (ISO 12125:1997, modified)
    EN 1667:1997 Prevailing torque type all-metal hexagon nuts with flange metric fine pitch thread (ISO 12126:1997, modified)
    EN ISO 1891-2:2014 Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO 1891-2:2014)
    EN ISO 2009:2011 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
    EN ISO 2010:2011 Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
    EN ISO 2320:2015 Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015)
    EN ISO 2338:1997 Parallel pins, of unhardened steel and austenitic stainless steel (ISO 2338:1997)
    EN ISO 2342:2003 Slotted headless screws with shank (ISO 2342:2003)
    EN ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011)
    EN ISO 3269:2000 Fasteners - Acceptance inspection (ISO 3269:2000)
    EN ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
    EN ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009)
    EN ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
    EN ISO 3506-4:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)
    EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
    EN ISO 4016:2011 Hexagon head bolts - Product grade C (ISO 4016:2011)
    EN ISO 4017:2014 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
    EN ISO 4018:2011 Hexagon head screws - Product grade C (ISO 4018:2011)
    EN ISO 4026:2003 Hexagon socket set screws with flat point (ISO 4026:2003)
    EN ISO 4027:2003 Hexagon socket set screws with cone point (ISO 4027:2003)
    EN ISO 4028:2003 Hexagon socket set screws with dog point (ISO 4028:2003)
    EN ISO 4029:2003 Hexagon socket set screws with cup point (ISO 4029:2003)
    EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
    EN ISO 4033:2012 Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012)
    EN ISO 4034:2012 Hexagon regular nuts (style 1) - Product grade C (ISO 4034:2012)
    EN ISO 4034:2012/AC:2013 Hexagon regular nuts (style 1) - Product grade C - Technical Corrigendum 1 (ISO 4034:2012/Cor 1:2013)
    EN ISO 4035:2012 Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)
    EN ISO 4036:2012 Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012)
    EN ISO 4042:1999 Fasteners - Electroplated coatings (ISO 4042:1999)
    EN ISO 4753:2011 Fasteners - Ends of parts with external ISO metric thread (ISO 4753:2011)
    EN ISO 4757:1994 Cross recesses for screws (ISO 4757:1983)
    EN ISO 4759-1:2000 Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000)
    EN ISO 4759-3:2000 Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Products grades A and C (ISO 4759-3:2000)
    EN ISO 4762:2004 Hexagon socket head cap screws (ISO 4762:2004)
    EN ISO 4766:2011 Slotted set screws with flat point (ISO 4766:2011)
    EN ISO 6157-2:2004 Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995)
    EN ISO 7040:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012)
    EN ISO 7042:2012 Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012)
    EN ISO 7045:2011 Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
    EN ISO 7046-1:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8 (ISO 7046-1:2011)
    EN ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
    EN ISO 7047:2011 Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
    EN ISO 7048:2011 Cross-recessed cheese head screws (ISO 7048:2011)
    EN ISO 7049:2011 Cross-recessed pan head tapping screws (ISO/FDIS 7049:2011)
    EN ISO 7050:2011 Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011)
    EN ISO 7051:2011 Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011)
    EN ISO 7053:2011 Hexagon washer head tapping screws (ISO 7053:2011)
    EN ISO 7089:2000 Plain washers - Normal series - Product grade A (ISO 7089:2000)
    EN ISO 7090:2000 Plain washers, chamfered - Normal series - Product grade A (ISO 7090:2000)
    EN ISO 7091:2000 Plain washers - Normal series - Product grade C (ISO 7091:2000)
    EN ISO 7092:2000 Plain washers - Small series - Product grade A (ISO 7092:2000)
    EN ISO 7093-1:2000 Plain washers - Large series - Part 1: Product grade A (ISO 7093-1:2000)
    EN ISO 7093-2:2000 Plain washers - Large series - Part 2: Product grade C (ISO 7093-2:2000)
    EN ISO 7094:2000 Plain washers - Extra large series - Product grade C (ISO 7094:2000)
    EN ISO 7094:2000/AC:2002 Plain washers - Extra large series - Product grade C (ISO 7094:2000/Cor.1:2000)
    EN ISO 7380-1:2011 Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
    EN ISO 7380-2:2011 Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)
    EN ISO 7719:2012 Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012)
    EN ISO 7719:2012/AC:2013 Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 - Technical Corrigendum 1 (ISO 7719:2012/Cor 1:2013)
    EN ISO 7721-2:1994 Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990)
    EN ISO 8673:2012 Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012)
    EN ISO 8674:2012 Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012)
    EN ISO 8675:2012 Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012)
    EN ISO 8676:2011 Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
    EN ISO 8733:1997 Parallel pins with internal thread, of unhardened steel or austenitic stainless steel (ISO 8733:1997)
    EN ISO 8734:1997 Parallel pins, or hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997)
    EN ISO 8735:1997 Parallel pins with internal thread, of hardened steel or martensitic stainless steel (ISO 8735:1997)
    EN ISO 8739:1997 Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997)
    EN ISO 8740:1997 Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997)
    EN ISO 8741:1997 Grooved pins - Half-length reverse taper grooved (ISO 8741:1997)
    EN ISO 8742:1997 Grooved pins - One-third-length centre grooved (ISO 8742:1997)
    EN ISO 8743:1997 Grooved pins - Half-length centre grooved (ISO 8743:1997)
    EN ISO 8744:1997 Grooved pins - Full-length taper grooved (ISO 8744:1997)
    EN ISO 8745:1997 Grooved pins - Half-length taper grooved (ISO 8745:1997)
    EN ISO 8746:1997 Grooved pins with round head (ISO 8746:1997)
    EN ISO 8747:1997 Grooved pins with countersunk head (ISO 8747:1997)
    EN ISO 8748:2007 Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007)
    EN ISO 8750:2007 Spring-type straight pins - Coiled, standard duty (ISO 8750:2007)
    EN ISO 8751:2007 Spring-type straight pins - Coiled, light duty (ISO 8751:2007)
    EN ISO 8752:2009 Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009)
    EN ISO 8765:2011 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
    EN ISO 10484:2004 Widening test on nuts (ISO 10484:1997)
    EN ISO 10510:2011 Tapping screw and washer assemblies with plain washers (ISO 10510:2011)
    EN ISO 10511:2012 Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012)
    EN ISO 10512:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012)
    EN ISO 10513:2012 Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012)
    EN ISO 10642:2004 Hexagon socket countersunk head screws (ISO 10642:2004)
    EN ISO 10642:2004/A1:2012 Hexagon socket countersunk head screws (ISO 10642:2004)
    EN ISO 10644:2009 Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009)
    EN ISO 10664:2014 Hexalobular internal driving feature for bolts and screws (ISO 10664:2014)
    EN ISO 10666:1999 Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999)
    EN ISO 10669:1999 Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999)
    EN ISO 10673:2009 Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009)
    EN ISO 10683:2014 Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014)
    EN ISO 10684:2004 Fasteners - Hot dip galvanized coatings (ISO 10684:2004)
    EN ISO 10684:2004/AC:2009 Fasteners - Hot dip galvanized coatings (ISO 10684:2004)
    EN ISO 12474:2010 Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
    EN ISO 13337:2009 Spring-type straight pins - Slotted, light duty (ISO 13337:2009)
    EN 14218:2003 Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified)
    EN 14219:2003 Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)
    EN 14219:2003/AC:2007 Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)
    EN 14399-1:2015 High-strength structural bolting assemblies for preloading - Part 1: General requirements
    EN 14399-2:2015 High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
    EN 14399-3:2015 High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
    EN 14399-4:2015 High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
    EN 14399-5:2015 High-strength structural bolting assemblies for preloading - Part 5: Plain washers
    EN 14399-6:2015 High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers
    EN 14399-7:2007 High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
    EN 14399-8:2007 High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
    EN 14399-9:2009 High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
    EN 14399-10:2009 High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
    EN ISO 14579:2011 Hexalobular socket head cap screws (ISO 14579:2011)
    EN ISO 14580:2011 Hexalobular socket cheese head screws (ISO 14580:2011)
    EN ISO 14581:2013 Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013)
    EN ISO 14582:2013 Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013)
    EN ISO 14583:2011 Hexalobular socket pan head screws (ISO 14583:2011)
    EN ISO 14584:2011 Hexalobular socket raised countersunk head screws (ISO 14584:2011)
    EN ISO 14585:2011 Hexalobular socket pan head tapping screws (ISO 14585:2011)
    EN ISO 14586:2011 Hexalobular socket countersunk head tapping screws (ISO 14586:2011)
    EN ISO 14587:2011 Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011)
    EN ISO 14588:2000 Blind rivets - Terminology and definitions (ISO 14588:2000)
    EN ISO 14589:2000 Blind rivets - Mechanical testing (ISO 14589:2000)
    EN 14831:2005 Fasteners - Tightening performance - Torque/Angle simplified test method
    EN 15048-1:2007 Non-preloaded structural bolting assemblies - Part 1: General requirements
    EN 15048-2:2007 Non-preloaded structural bolting assemblies - Part 2: Suitability test
    EN ISO 15065:2005 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005)
    EN ISO 15330:1999 Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999)
    EN ISO 15480:1999 Hexagon washer head drilling screws with tapping screw thread (ISO 15480:1999)
    EN ISO 15481:1999 Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999)
    EN ISO 15482:1999 Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999)
    EN ISO 15483:1999 Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999)
    EN ISO 15973:2000 Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15973:2000)
    EN ISO 15974:2000 Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000)
    EN ISO 15975:2002 Closed end blind rivets with break pull mandrel and protrudiing head - AI/AIA (ISO 15975:2002)
    EN ISO 15976:2002 Closed end blind rivets with break pull mandrel and protrudiing head - St/St (ISO 15976:2002)
    EN ISO 15977:2002 Open end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15977:2002)
    EN ISO 15978:2002 Open end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15978:2002)
    EN ISO 15979:2002 Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002)
    EN ISO 15980:2002 Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002)
    EN ISO 15981:2002 Open end blind rivets with break pull mandrel and protruding head - AIA/AIA (ISO 15981:2002)
    EN ISO 15982:2002 Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA (ISO 15982:2002)
    EN ISO 15983:2002 Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002)
    EN ISO 15984:2002 Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)
    EN ISO 16047:2005 Fasteners - Torque/clamp force testing (ISO 16047:2005)
    EN ISO 16047:2005/A1:2012 Fasteners - Torque/clamp force testing (ISO 16047:2005)
    EN ISO 16048:2003 Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003)
    EN ISO 16426:2002 Fasteners - Quality assurance system (ISO 16426:2002)
    EN ISO 16582:2002 Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)
    EN ISO 16583:2002 Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)
    EN ISO 16584:2002 Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt (ISO 16584:2002)
    EN ISO 16585:2002 Closed end blind rivets Closed end blind rivets with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)
    EN 20273:1991 Fasteners - Clearance holes for bolts and screws (ISO 273:1979)
    EN 20898-7:1995 Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992)
    EN ISO 21670:2014 Fasteners - Hexagon weld nuts with flange (ISO 21670:2014)
    EN 22339:1992 Taper pins, unhardened (ISO 2339:1986)
    EN 22340:1992 Clevis pins without head (ISO 2340:1986)
    EN 22341:1992 Clevis pins with head (ISO 2341:1986)
    EN ISO 23429:2004 Gauging of hexagon sockets (ISO 23429:2004)
    EN 24015:1991 Hexagon head bolts - Product grade B - Reduced shank (Shank diameter = pitch diameter) (ISO 4015:1979)
    EN 26157-1:1991 Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988)
    EN 26157-3:1991 Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)
    EN 27434:1992 Slotted set screws with cone point (ISO 7434:1983)
    EN 27435:1992 Slotted set screws with long dog point (ISO 7435:1983)
    EN 27436:1992 Slotted set screws with cup point (ISO 7436:1983)
    EN 27721:1991 Countersunk head screws - Head configuration and gauging (ISO 7721:1983)
    EN 28736:1992 Taper pins with internal thread, unhardened (ISO 8736:1986)
    EN 28737:1992 Taper pins with external thread, unhardened (ISO 8737:1986)
    EN 28738:1992 Plain washers for clevis pins - Product grade A (ISO 8738:1986)
    EN 28749:1992 Pins and grooved pins - Shear test (ISO 8749:1986)
    EN 28839:1991 Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)


    missing:
    EN ISO 898-1:2013/AC:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread - Technical Corrigendum 1 (ISO 898-1:2013/Cor 1:2013) - missing AC
    EN 1661:1997/AC:1998 Hexagon nuts with flange (ISO/DIS 4161:1996, modified) - missing AC
    EN ISO 2320:2015 Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015) - missing valid edition
    EN ISO 4034:2012/AC:2013 Hexagon regular nuts (style 1) - Product grade C - Technical Corrigendum 1 (ISO 4034:2012/Cor 1:2013) - missing AC
    EN ISO 7094:2000/AC:2002 Plain washers - Extra large series - Product grade C (ISO 7094:2000/Cor.1:2000) - missing AC
    EN ISO 7719:2012/AC:2013 Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 - Technical Corrigendum 1 (ISO 7719:2012/Cor 1:2013) - missing AC
    EN ISO 7721-2:1994 Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990) - missing
    EN ISO 10664:2014 Hexalobular internal driving feature for bolts and screws (ISO 10664:2014) - missing


    [link Point to another website Only the registered members can access] or

    [link Point to another website Only the registered members can access]


    See More: CEN Standards Collection 110/370: CEN TC 185 - Fasteners

  2. # ADS
    Spons Circuit
    Join Date
    Always
    Posts
    Many
     
  3. #2

  4.    Sponsored Links



    -

  5. #3

    Re: CEN standards collection 110/100: CEN TC 185 - Fasteners

    Thank you for this post but a lot of standards are DIN format and therefore in German. Could you share them in English and especially the ISO 898-1 ?

  6. #4

  7. #5

    Re: CEN Standards Collection 110/300: CEN TC 185 - Fasteners

    small update:

    EN ISO 7094:2000/AC:2002 Plain washers - Extra large series - Product grade C (ISO 7094:2000/Cor.1:2000) - added AC 2002
    EN ISO 7719:2012 Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012) - EN version
    EN ISO 10664:2014 Hexalobular internal driving feature for bolts and screws (ISO 10664:2014) - added missing standard

    [link Point to another website Only the registered members can access]
    or

    [link Point to another website Only the registered members can access]


  8.    Spons.


  9. #6

    Join Date
    Aug 2015
    Location
    Dubai, UAE
    Posts
    109
    Blog Entries
    4

    Re: CEN standards collection 110/100: CEN TC 185 - Fasteners

    Quote Originally Posted by agoede View Post
    Thank you for this post but a lot of standards are DIN format and therefore in German. Could you share them in English and especially the ISO 898-1 ?
    here u go ISO 898-1
    Attached Files Attached Files

  10. #7

    Re: CEN Standards Collection 110/300: CEN TC 185 - Fasteners

    update:

    EN ISO 2320:2015 Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015) - added missing standard


    missing list:
    EN ISO 898-1:2013/AC:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread - Technical Corrigendum 1 (ISO 898-1:2013/Cor 1:2013)
    EN 1661:1997/AC:1998 Hexagon nuts with flange (ISO/DIS 4161:1996, modified)
    EN ISO 4034:2012/AC:2013 Hexagon regular nuts (style 1) - Product grade C - Technical Corrigendum 1 (ISO 4034:2012/Cor 1:2013)
    EN ISO 7719:2012/AC:2013 Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 - Technical Corrigendum 1 (ISO 7719:2012/Cor 1:2013)
    EN ISO 7721-2:1994 Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990)



    [link Point to another website Only the registered members can access]
    or

    [link Point to another website Only the registered members can access]


  11. #8

    Re: CEN Standards Collection 110/340: CEN TC 185 - Fasteners

    Update:
    EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)

    EN version
    EN ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)

    EN version
    EN ISO 1479:2011 Hexagon head tapping screws (ISO 1479:2011)

    EN version
    EN ISO 1481:2011 Slotted pan head tapping screws (ISO 1481:2011)

    EN version
    EN ISO 1482:2011 Slotted countersunk (flat) head tapping screws (ISO 1482:2011)

    EN version
    EN ISO 1483:2011 Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)

    EN version
    EN ISO 2009:2011 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)

    EN version
    EN ISO 2010:2011 Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)

    EN version
    EN ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011)

    EN version
    EN ISO 3506-4:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)

    EN version
    EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011)

    EN version
    EN ISO 4016:2011 Hexagon head bolts - Product grade C (ISO 4016:2011)

    EN version
    EN ISO 4018:2011 Hexagon head screws - Product grade C (ISO 4018:2011)

    EN version
    EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

    EN version
    EN ISO 4033:2012 Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012)

    EN version
    EN ISO 4034:2012 Hexagon regular nuts (style 1) - Product grade C (ISO 4034:2012)

    EN version
    EN ISO 4035:2012 Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)

    EN version
    EN ISO 4036:2012 Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012)

    EN version
    EN ISO 4766:2011 Slotted set screws with flat point (ISO 4766:2011)

    EN version
    EN ISO 7040:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012)

    EN version
    EN ISO 7042:2012 Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012)

    EN version
    EN ISO 7046-1:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8 (ISO 7046-1:2011)

    EN ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)

    EN version
    EN ISO 7047:2011 Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)

    EN version
    EN ISO 7048:2011 Cross-recessed cheese head screws (ISO 7048:2011)

    EN version
    EN ISO 7049:2011 Cross-recessed pan head tapping screws (ISO/FDIS 7049:2011)

    EN version
    EN ISO 7050:2011 Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011)

    EN version
    EN ISO 7051:2011 Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011)

    EN version
    EN ISO 7053:2011 Hexagon washer head tapping screws (ISO 7053:2011)

    EN version
    EN ISO 7380-1:2011 Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)

    EN ISO 7380-2:2011 Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)

    EN version
    EN ISO 8673:2012 Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012)

    EN version
    EN ISO 8674:2012 Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012)

    EN version
    EN ISO 8675:2012 Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012)

    EN version
    EN ISO 8676:2011 Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)

    EN version
    EN ISO 8750:2007 Spring-type straight pins - Coiled, standard duty (ISO 8750:2007)

    EN version
    EN ISO 8751:2007 Spring-type straight pins - Coiled, light duty (ISO 8751:2007)

    EN version
    EN ISO 8765:2011 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)

    EN version
    EN ISO 10510:2011 Tapping screw and washer assemblies with plain washers (ISO 10510:2011)

    EN version
    EN ISO 10511:2012 Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012)

    EN version
    EN ISO 10512:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012)



    [link Point to another website Only the registered members can access] or

    [link Point to another website Only the registered members can access]


  12. #9

    Re: CEN Standards Collection 110/340: CEN TC 185 - Fasteners

    update:

    EN 1661:1997/AC:1998 Hexagon nuts with flange (ISO/DIS 4161:1996, modified) - added missing AC
    EN 1662:1997/AC:2007 Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified) - EN version


    missing list:

    EN ISO 898-1:2013/AC:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread - Technical Corrigendum 1 (ISO 898-1:2013/Cor 1:2013)
    EN ISO 4034:2012/AC:2013 Hexagon regular nuts (style 1) - Product grade C - Technical Corrigendum 1 (ISO 4034:2012/Cor 1:2013)
    EN ISO 4759-3:2016 Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016)
    EN ISO 7719:2012/AC:2013 Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 - Technical Corrigendum 1 (ISO 7719:2012/Cor 1:2013)
    EN ISO 7721-2:1994 Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990)
    EN 15048-1:2016 Non-preloaded structural bolting assemblies - Part 1: General requirements
    EN 15048-2:2016 Non-preloaded structural bolting assemblies - Part 2: Suitability test


    links:

    [link Point to another website Only the registered members can access]
    or

    [link Point to another website Only the registered members can access]


  13. #10

    Re: CEN Standards Collection 110/350: CEN TC 185 - Fasteners

    update:

    EN ISO 4759-3:2016 Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016) - added missing standard
    EN 15048-1:2016 Non-preloaded structural bolting assemblies - Part 1: General requirements - added missing standard
    EN 15048-2:2016 Non-preloaded structural bolting assemblies - Part 2: Suitability test - added missing standard


    missing list is:

    EN ISO 898-1:2013/AC:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread - Technical Corrigendum 1 (ISO 898-1:2013/Cor 1:2013)
    EN ISO 4034:2012/AC:2013 Hexagon regular nuts (style 1) - Product grade C - Technical Corrigendum 1 (ISO 4034:2012/Cor 1:2013)
    EN ISO 7719:2012/AC:2013 Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 - Technical Corrigendum 1 (ISO 7719:2012/Cor 1:2013)
    EN ISO 7721-2:1994 Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990)


    links:

    [link Point to another website Only the registered members can access]
    or

    [link Point to another website Only the registered members can access]


  14. #11

    Re: CEN Standards Collection 110/350: CEN TC 185 - Fasteners

    Hello friends,

    Is anybody can share the standard EN 10269:2013 "Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties" ?

    I have only the rev 1999...

    Thanks for your help.

  15.    Spons.


  16. Re: CEN Standards Collection 110/350: CEN TC 185 - Fasteners

    Thanks a lot

    My threads; yanakipetkov :


    •   

    Similar Threads

    1. Replies: 2
      Last Post: 07-29-2017, 03:33 AM
    2. Replies: 0
      Last Post: 12-31-2016, 04:12 AM
    3. CEN Standards Collection
      By Sajid Ali Khan in forum Mechanical Engineering
      Replies: 4
      Last Post: 06-12-2016, 12:55 AM
    4. CEN Standards Collection
      By Sajid Ali Khan in forum Mechanical Engineering
      Replies: 1
      Last Post: 03-25-2016, 10:08 PM
    5. EN 10269 - Steels and nickel alloys for fasteners
      By Tetraedar in forum Mechanical Engineering
      Replies: 2
      Last Post: 11-20-2013, 09:15 AM

    Tags for this Thread

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •