Page 1 of 23 1 2 3 11 ... LastLast
Results 1 to 12 of 271
  1. UL Standards Needed

    Dear Friends,

    I need the following UL Standards:
    UL 1 Flexible Metal Conduit
    UL 4 Armored Cable
    UL 8 Foam Fire Extinguishers
    UL 9 Fire Tests of Window Assemblies
    UL 10B Fire Tests of Door Assemblies
    UL 10C Positive Pressure Fire Tests of Door Assemblies
    UL 38 Manually Actuated Signaling Boxes for Use with Fire-Protective Signaling Systems
    UL 83 Thermoplastic-Insulated Wires and Cables
    UL 94 Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
    UL 96A Installation Requirements for Lightning Protection Systems
    UL 125 Flow Control Valves for Anhydrous Ammonia and LP-Gas
    UL 132 Safety Relief Valves for Anhydrous Ammonia and LP-Gas
    UL 142 Steel Aboveground Tanks for Flammable and Combustible Liquids
    UL 154 Carbon-Dioxide Fire Extinguishers
    UL 199 Automatic Sprinklers for Fire-Protection Service
    UL 299 Dry Chemical Fire Extinguishers
    UL 217 Single and Multiple Station Smoke Detectors
    UL 219 Lined Fire Hose for Interior Standpipes
    UL 231 Power Outlets
    UL 260 Standard for Dry Pipe and Deluge Valves for Fire-Protection Service
    UL 262 Gate Valves for Fire-Protection Service
    UL 268 Smoke Detectors for Fire Protective Signaling Systems
    UL 268A Smoke Detectors for Duct Application
    UL 312 Check Valves for Fire-Protection Service
    UL 325 Door, Drapery, Gate, Louver, and Window Operators and Systems
    UL 331 Strainers for Flammable Fluids and Anhydrous Ammonia
    UL 340 Tests for Comparative Flammability of Liquids
    UL 393 Indicating Pressure Gauges for Fire-Protection Service
    UL 401 Portable Spray Hose Nozzles for Fire-Protection Service
    UL 404 Gauges, Indicating Pressure, for Compressed Gas Service
    UL 437 Key Locks
    UL 448 Standard for Pumps for Fire-Protection Service
    UL 467 Grounding and Bonding Equipment
    UL 508A Industrial Control Panels
    UL 525 Flame Arresters
    UL 539 Single and Multiple Station Heat Detectors
    UL 674 Standard for Electric Motors and Generators for Use in Division 1 Hazardous (Classified) Locations
    UL 698A Industrial Control Panels Relating to Hazardous (Classified) Locations
    UL 711 Fire Extinguishers, Rating and Fire Testing
    UL 719 Nonmetallic-Sheathed Cables
    UL 727 Oil-Fired Cental Furnaces
    UL 778 Motor Operated Water Pumps
    UL 789 Indicator Posts for Fire-Protection Service
    UL 844 Electric Lighting Fixtures for Use in Hazardous (Classified) Locations
    UL 864 Control Units and Accessories for Fire Alarm Systems
    UL 913 Intrinsically Safe Apparatus
    UL 1002 Electrically Operated Valves for Use in Hazardous (Classified) Locations
    UL 1040 Fire Test of Insulated Wall Construction
    UL 1058 Halogenated Agent Extinguishing System Units
    UL 1072 Medium-Voltage Power Cables
    UL 1091 Butterfly Valves for Fire-Protection Service
    UL 1203 Explosion-Proof and Dust-Ignition Electrical Equipment for Use in Hazardous (Classified) Locations
    UL 1468 Standard for Direct Acting Pressure Reducing and Pressure Restricting Valves
    UL 1481 Power Supplies for Fire Protective Signaling Systems
    UL 1486 Quick Opening Divices for Dry Pipe Valves for Fire-Protection Service
    UL 1685 Vertical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables
    UL 1709 Standard for Rapid Rise Fire Tests of Protection Materials for Structural Steel
    UL 1711 Amplifiers for Fire Protective Signaling Systems
    UL 1730 Smoke Detector Monitors
    UL 1739 Pilot-Operated Pressure-Control Valves for Fire-Protection Service
    UL 1778 Uninterruptible Power Systems
    UL 1803 Factory Follow-Up on Third Party Certified Portable Fire Extinguishers
    UL 2034 Single and Multiple Station Carbon Monoxide Detectors
    UL 2111 Overheating Protection for Motors
    UL 2227 Standard For Safety For Overfilling Prevention Devices
    UL 2250 Instrumentation Tray Cable
    UL 2351 Spray Nozzles for Fire-Protection Service
    UL 5085-3 Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers
    UL 60079-5 Electrical Apparatus for Explosive Gas Atmospheres - Part 5: Powder Filling 'q'
    UL 60079-6 Electrical Apparatus for Explosive Gas Atmospheres - Part 6: Oil-Immersion 'o'
    UL 60079-7 Electrical Apparatus for Explosive Gas Atmospheres - Part 7: Increased Safety "e"
    UL 60079-15 Electrical Apparatus for Explosive Gas Atmospheres - Part 15: Electrical Apparatus with Type of Protection 'n'
    UL 60745-1 Hand-Held Motor-Operated Electric Tools - Safety - Part 1: General Requirements

    Anyone having these standards could you please upload them.

    Thanks very much.


    See More: UL Standards Needed

  2. # ADS
    Spons Circuit
    Join Date
    Always
    Posts
    Many
     
  3. Good post. I appreciate it.
    Many thanks to ur post. I love it.

    [link Point to another website Only the registered members can access]

    [link Point to another website Only the registered members can access]

    [link Point to another website Only the registered members can access]

    My threads; scapflamad :


    •    Sponsored Links



      -

    • svz sfdb dgn

      My threads; scapflamad :


      • #4
        HI Guniawala,

        UL 83-2001 Thermoplastic Insulated Wires and Cables.pdf 0.945 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        UL 142 - 1998-for steel aboveground tank for flammable liquid.pdf 5.801 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        UL 1709-2007 Rapid Rise Fire Tests of Protection Materials for Structural Steell.pdf 1.249 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        UL 1730-2007 Standard for Smoke Detector Monitors and Accessories.pdf 0.496 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        UL 1739-2007 Standard for Pilot-Operated Pressure-Control Valves for Fire-Protection Service.pdf 0.208 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        UL 1778 2005 Uninterruptible Power Systems.pdf 0.765 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        UL 2034-2007 Standard for Single and Multiple Station Carbon Monoxide Alarms.pdf 1.029 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        That’s all I have for this moment.

        I Think the following UL Standard are similar with IEC.
        UL 60079-5 Electrical Apparatus for Explosive Gas Atmospheres - Part 5: Powder Filling 'q'
        UL 60079-6 Electrical Apparatus for Explosive Gas Atmospheres - Part 6: Oil-Immersion 'o'
        UL 60079-7 Electrical Apparatus for Explosive Gas Atmospheres - Part 7: Increased Safety "e"
        UL 60079-15 Electrical Apparatus for Explosive Gas Atmospheres - Part 15: Electrical Apparatus with Type of Protection 'n'

        If you accept IEC please let me know


      • #5
        HI Guniawala,

        UL 83-2001 Thermoplastic Insulated Wires and Cables.pdf 0.945 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        UL 142 - 1998-for steel aboveground tank for flammable liquid.pdf 5.801 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        UL 1709-2007 Rapid Rise Fire Tests of Protection Materials for Structural Steell.pdf 1.249 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        UL 1730-2007 Standard for Smoke Detector Monitors and Accessories.pdf 0.496 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        UL 1739-2007 Standard for Pilot-Operated Pressure-Control Valves for Fire-Protection Service.pdf 0.208 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        UL 1778 2005 Uninterruptible Power Systems.pdf 0.765 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        UL 2034-2007 Standard for Single and Multiple Station Carbon Monoxide Alarms.pdf 1.029 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        That’s all I have for this moment.

        I Think the following UL Standard are similar with IEC.
        UL 60079-5 Electrical Apparatus for Explosive Gas Atmospheres - Part 5: Powder Filling 'q'
        UL 60079-6 Electrical Apparatus for Explosive Gas Atmospheres - Part 6: Oil-Immersion 'o'
        UL 60079-7 Electrical Apparatus for Explosive Gas Atmospheres - Part 7: Increased Safety "e"
        UL 60079-15 Electrical Apparatus for Explosive Gas Atmospheres - Part 15: Electrical Apparatus with Type of Protection 'n'

        If you accept IEC please let me know

        Last edited by Achmad Nur Eddin; 10-31-2009 at 06:43 AM.

      •    Spons.


      • Some more UL Standards

        Dear Achmad Nur Eddin,

        Thank you very much for uploading UL standards. There are some more standards in my library. I request other members to please upload if you have UL standards. In the end we will all have the complete set.

        UL 4 - Armored Cable.pdf

        [link Point to another website Only the registered members can access]
        UL 444 - Communication Cables

        [link Point to another website Only the registered members can access]
        UL 467 - Grounding and Bonding Equipment

        [link Point to another website Only the registered members can access]
        UL 674 - Electric Motors and Generators for Use in Division 1 Hazardous (Classified) Locations

        [link Point to another website Only the registered members can access]
        UL 698A - Industrial Control Panels Relating to Hazardous (Classified) Locations

        [link Point to another website Only the registered members can access]
        UL 711 - Rating and Fire Testing of Fire Extinguishers

        [link Point to another website Only the registered members can access]
        UL 823 - Electric Heaters For Use In Hazardous (Classified) Locations

        [link Point to another website Only the registered members can access]
        UL 844 - Luminaires for Use in Hazardous (Classified) Locations

        [link Point to another website Only the registered members can access]
        UL 877 - Circuit-Breaker Enclosures for Use in Hazardous Locations

        [link Point to another website Only the registered members can access]
        UL 886 - Outlet Boxes and Fittings for Use in Hazardous (Classified) Locations

        [link Point to another website Only the registered members can access]
        UL 894 - Switches For Use In Hazardous (Classified) Locations

        [link Point to another website Only the registered members can access]
        UL 913 - Intrinsically Safe Apparatus for Use in Class I, II, and III, Division 1 Locations

        [link Point to another website Only the registered members can access]
        UL 1424 - Cables for Power-Limited Fire-Alarm Circuits

        [link Point to another website Only the registered members can access]


      • #7
        Thank you for your sharing !!!!
        I like to download your file, but it is shown in the rapidshare the following note :

        1st try with the file armored
        ERROR

        You want to download the following file:

        [link Point to another website Only the registered members can access]
        This file can only be downloaded by becoming a Premium member

        There are no more download slots available for free users right now. If you don't want to become a premium member, you might want to try again late


        2nd try with file grounding
        ERROR

        You want to download the following file:

        [link Point to another website Only the registered members can access]
        This file can only be downloaded by becoming a Premium member

        There are no more download slots available for free users right now. If you don't want to become a premium member, you might want to try again later.

        I'm not premium member.
        But could you please upload again in another website such as ifile
        Thank you



      • #9

      • #10

        Join Date
        Sep 2008
        Location
        Planet Earth
        Posts
        102

      • #11

      •    Spons.


      • #12
        1. UL 1-2007 Standard for Flexible Metal Conduit.pdf 542.23 KB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        2 UL 5A-2008 Nonmetallic Surface Raceways and Fittings.pdf 933.08 KB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        3 UL 5B-2009 Strut-Type Channel Raceways and Fittings.pdf 634.5 KB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        4 UL 5C-2007 Surface Raceways and Fittings for Use with Data, Signal, and Control Circuits.pdf 500.3 KB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        5. UL 6-2004 Electrical rigid metal conduit-steel.pdf 687.53 KB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        6 UL 10B-2008 Standard for Fire Tests of Door Assemblies.pdf 549.8 KB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        7. UL 10C-2009 Positive Pressure Fire Tests of Door Assemblies.pdf 0.655 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        8. UL 48-2004 Standard for Electric Signs.pdf 0.714 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        9. UL 96-2005 Standard for Lightning Protection Components.pdf 0.592 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        10 UL 96A-2007 Installation Requirements for Lightning Protection Systems.pdf 1.095 MB

        [link Point to another website Only the registered members can access]

        [link Point to another website Only the registered members can access]
        That’s all I have for today

        Regards


      •   

      Similar Threads

      1. Standards needed
        By panthere0rose in forum Mechanical Engineering
        Replies: 8
        Last Post: 05-22-2015, 12:38 AM
      2. Iso standards needed
        By Onoma Epwnymo in forum Laboratory Measurements
        Replies: 3
        Last Post: 03-30-2013, 01:02 PM
      3. standards needed
        By mmanous13 in forum Mechanical Engineering
        Replies: 9
        Last Post: 09-04-2012, 03:18 AM
      4. Standards needed
        By panthere0rose in forum Mechanical Engineering
        Replies: 2
        Last Post: 04-17-2012, 08:34 PM
      5. Jpi standards needed
        By setak in forum Materials Science &Corrosion
        Replies: 0
        Last Post: 08-06-2011, 12:15 AM

      Tags for this Thread

      Bookmarks

      Posting Permissions

      • You may not post new threads
      • You may not post replies
      • You may not post attachments
      • You may not edit your posts
      •