Page 1 of 3 1 2 3 LastLast
Results 1 to 12 of 30

Thread: Paladin Design Base Full and Free

  1. #1

    Paladin Design Base Full and Free

    Installation Steps would be:

    1- Install SMAC 2.0 software on your computer. ( I shall also give you the link for this software)
    2- Once installed SMAC software, generate its serial from the ----- folder and make this software active.
    3- Run this software and change the MAC address of your computer. ( I shall provide you the correct MAC address along with matching .lic file for EDSA).
    4- Download the Design Base software and install it on your computer.
    5- Then copy the .lic file and paste it under C:\Design Base5\config
    6- Go to start, All Programs, Paladin Design Base, and click on Rebuild Paladin Design Base Toolbar.
    7- After that you can run the program from the Design Base Icon on Desktop normally.
    Here is the link for SMAC software to change the MAC address.

    [link Point to another website Only the registered members can access]

    Run this software and change the MAC address of your computer as per the following:

    2C 76 8A B0 29 62 and click update MAC. The software will change the MAC of your computer. After that restart your computer.

    And Install EDSA Paladin Design Base software.

    [link Point to another website Only the registered members can access]

    [link Point to another website Only the registered members can access]

    [link Point to another website Only the registered members can access]

    [link Point to another website Only the registered members can access]

    [link Point to another website Only the registered members can access]

    [link Point to another website Only the registered members can access]
    License:

    [link Point to another website Only the registered members can access]
    Enjoy


    See More: Paladin Design Base Full and Free

  2. # ADS
    Spons Circuit
    Join Date
    Always
    Posts
    Many
     
  3. #2

    Re: Paladin Design Base Full and Free

    dear fx007,the License's links :

    [link Point to another website Only the registered members can access]

    My threads; tyenfi :


    •    Sponsored Links



      -

    • #3

      Re: Paladin Design Base Full and Free

      dear fx0007
      this is the message from filetea's link:
      Sorry, but the content you are requesting cannot be found.
      FileTea does not stores files in the server. They are only available while FileTea page is opened in the browser.
      If you are trying to download a file, it is possible that the owner removed it already, or simply closed the page.

      My threads; tyenfi :


      • #4

        Re: Paladin Design Base Full and Free

        dear fx0007
        this is the message from filetea's link:
        Sorry, but the content you are requesting cannot be found.
        FileTea does not stores files in the server. They are only available while FileTea page is opened in the browser.
        If you are trying to download a file, it is possible that the owner removed it already, or simply closed the page.

        My threads; tyenfi :


        • #5

        •    Spons.


        • #6

          Re: Paladin Design Base Full and Free

          dear fx007,the link:

          [link Point to another website Only the registered members can access] or send Paladin.lic file to my mail: 1037387085@qq.com or tanyong0965@sina.com? so many thanks to you!

          My threads; tyenfi :


          • #7

            Re: Paladin Design Base Full and Free

            dear fx007,the link:

            [link Point to another website Only the registered members can access] or send Paladin.lic file to my mail: 1037387085@qq.com or tanyong0965@sina.com? so many thanks to you!

            My threads; tyenfi :


            • #8

              Re: Paladin Design Base Full and Free

              dear fx007, you also can share the Paladin.lic file's content to this forum. thanks!

              My threads; tyenfi :


              • #9

                Re: Paladin Design Base Full and Free

                Quote Originally Posted by fx007 View Post
                Installation Steps would be:

                1- Install SMAC 2.0 software on your computer. ( I shall also give you the link for this software)
                2- Once installed SMAC software, generate its serial from the ----- folder and make this software active.
                3- Run this software and change the MAC address of your computer. ( I shall provide you the correct MAC address along with matching .lic file for EDSA).
                4- Download the Design Base software and install it on your computer.
                5- Then copy the .lic file and paste it under C:\Design Base5\config
                6- Go to start, All Programs, Paladin Design Base, and click on Rebuild Paladin Design Base Toolbar.
                7- After that you can run the program from the Design Base Icon on Desktop normally.
                Here is the link for SMAC software to change the MAC address.

                [link Point to another website Only the registered members can access]
                Run this software and change the MAC address of your computer as per the following:

                2C 76 8A B0 29 62 and click update MAC. The software will change the MAC of your computer. After that restart your computer.

                And Install EDSA Paladin Design Base software.

                [link Point to another website Only the registered members can access]

                [link Point to another website Only the registered members can access]

                [link Point to another website Only the registered members can access]

                [link Point to another website Only the registered members can access]

                [link Point to another website Only the registered members can access]

                [link Point to another website Only the registered members can access]
                License:

                [link Point to another website Only the registered members can access]
                Enjoy

                in step one, you can also use tmac.. a software to change the mac address.. and it is free..

                [link Point to another website Only the registered members can access] tmac/


                with this you can change your mac address restore it without computer restarts..

                Last edited by surgeArrester; 07-19-2014 at 07:18 PM.

              • Re: Paladin Design Base Full and Free

                after following the procedures and installing the software, the licence manager says that hostid of the computer doesnt not match the host id, please help

                My threads; sedianpo :


                • #11

                  Re: Paladin Design Base Full and Free

                  Quote Originally Posted by sedianpo View Post
                  after following the procedures and installing the software, the licence manager says that hostid of the computer doesnt not match the host id, please help
                  I don't believe it. Maybe you didn't configure SMAC or TMAC to match host id.

                •    Spons.


                • #12

                  Re: Paladin Design Base Full and Free

                  dear fx007 I get your lic and it worked perfectly for me , but I have ver 5 not 5.1 SP1
                  your fileom links not work
                  Plz send new links for 5.1 SP1 version

                  My threads; mahfouz :


                  •   

                  Similar Threads

                  1. CDEGS - 2k FULL FREE FOR ALL
                    By fx007 in forum Electrical & Power Engineering
                    Replies: 62
                    Last Post: 06-05-2020, 10:59 AM
                  2. EDSA Paladin DesignBase 5.0
                    By surgeArrester in forum Electrical & Power Engineering
                    Replies: 18
                    Last Post: 02-13-2020, 08:20 PM
                  3. Base Plate and Anchor Bolts Design Software
                    By ayub345 in forum Civil & Structural Engineering
                    Replies: 16
                    Last Post: 12-27-2014, 02:30 PM
                  4. Design Pressure ( Full Liquid )
                    By adiarahman08 in forum Mechanical Engineering
                    Replies: 9
                    Last Post: 08-04-2010, 08:57 PM
                  5. get free full version
                    By soni1 in forum Computer & Internet
                    Replies: 1
                    Last Post: 11-18-2009, 12:51 AM

                  Tags for this Thread

                  Bookmarks

                  Posting Permissions

                  • You may not post new threads
                  • You may not post replies
                  • You may not post attachments
                  • You may not edit your posts
                  •