Process Safety Calculations is an essential guide for process safety engineers involved in calculating and predicting risks and consequences. The book focuses on calculation procedures based on basic chemistry, thermodynamics, fluid dynamics, conservation equations, kinetics and practical models. This book provides helpful calculations to demonstrate compliance with regulations and standards. Standards such as Seveso directive(s)/COMAH, CLP regulation, ATEX directives, PED directives, REACH regulation, OSHA/NIOSH and UK ALARP are covered, along with risk and consequence assessment, stoichiometry, thermodynamics, stress analysis and fluid-dynamics.
Key Features

Includes realistic engineering models with validation from CFD modeling and/or industry testing
  • Provides an introduction into basic principles that govern process relationships in modern industry
  • Helps the reader find and apply the right principles to the specific problem being solved, mitigated or validated


Process safety engineers, Process engineers, Chemical Engineers, Environmental engineers, Industrial engineers, Students, Governmental agency (OSHA, HSE, CSB, etc.) employees. Of interest to the following sectors: Oil and gas, Petrochemical industry, Power generation, Basic/fine chemistry, Pharmaceutical industry

Table of Contents
Acknowledgements
PART 1: FUNDAMENTALS
Chapter 1: Chemistry of Process Safety
Chapter 2: Thermodynamics and Thermochemistry of Process Safety
Chapter 3: Reaction Engineering for Process Safety
Chapter 4: Fluid-Dynamics for Process Safety
Chapter 5: Loads and Stress Analysis for Process Safety
Chapter 6: Statistics and Reliability for Process Safety
PART 2: CONSEQUENCE ASSESSMENT
Chapter 7: Source Models
Chapter 8: Dispersion Models
Chapter 9: Fire
Chapter 10: Explosions
Chapter 11: Dust Explosions
PART 3: QUANTITATIVE RISK ASSESSMENT
Chapter 12: Quantitative Risk Assessment


[link Point to another website Only the registered members can access]


See More: Process Safety Calculations