Eclipse step by step

**dipak_m** · 10-27-2009, 09:52 AM

Dear Term,
I think you are busy. We are waiting for your eclipse training (rest chapters)
Thanks

**temr** · 10-29-2009, 04:53 PM

Dear All, i was out for the buissness reasons soon i will start again just need more time for finishing several stuff on my side
Take care

**temr** · 10-30-2009, 06:53 AM

to All.
I need help in translation one of the document in Arabic to English
will appritiate any help
[link Point to another website Only the registered members can access]

**temr** · 10-30-2009, 08:30 PM

Almost a day pass no help (((

**NGUYETMINHPT** · 10-31-2009, 06:29 AM

i'm a new user, thanks for ur upload

**Shakespear** · 10-31-2009, 10:55 AM

Hello Fiends in Arabic countries, please help Temr

The work he has done in this thread is valueless, so a bit of help here would be really really nice.

Temr I will try a friend of mine who works in SA and perhaps one of his Arabic friends might help. No promises but I will try.

**temr** · 10-31-2009, 12:11 PM

Shakespear - Thanks a lot for support you back me to the life

**ehsan ali** · 10-31-2009, 01:01 PM

@ temr!
you are doing a great job to guide us who r new in using Eclipse.

**halim78** · 11-01-2009, 11:06 AM

Originally Posted by temr

to All.
I need help in translation one of the document in Arabic to English
will appritiate any help
[link Point to another website Only the registered members can access]

I hope this would help
------------------------------------------------------------------
Ratawy reservoir checking :
Descending production tubing of 2 7/8 inches till the bridge ending and checking the top of the bridge plug at 3503 m with 2 tons.
Removing the completion mud by fresh water, checking the bridge with a pressure of 1500 psia.
Hanging the production tubing at 3473 m and putting the charismas’ tree .
Making the perforation (3482-3488 m) with ceramic shots ,1 11/16 inches -density 13shots/m .The tubing head pressure raised immediately to 600 psia, opening the well to flowing 100l/min.
Continuing the well production and clean-up (very viscous oil).
Acidizing the perforations mentioned above with acid( HCL 12% HF 3%)(circulating pressure 3600 psia and injection rate 400l/min).
Opening well for clean-up. Measuring well rates with different choke sizes.
Closing well for build-up. killing the well with a 1.25 gm/cc brine and a ½ inch choke and controlling the well.
Putting and checking the 9 inches BOP.
Pulling the production tubing, and setting a bridge plug (BP)at 3453m to isolate perforations.
Descending again the production tubing to check the BP, after that the tubing was pulled till 2600m and a cement plug was set and verified at 2513m.
Removing the brine by sodium chromite .
Controlling the well, hanging the production tubing at 2300m , putting charisma's tree and checked with a 6500 psia.
Moving the rig to another location.
----------------------------------------------------------------------

**temr** · 11-01-2009, 12:14 PM

halim78 ,Asalem Alekum!
Thank you for you help
Keep helping and may be you will change the world
Take care
Temr

**www** · 11-02-2009, 10:19 AM

Real big thank to halim78. The translation was very helpful in my current project.

**kike77** · 11-06-2009, 06:28 AM

Hi Temr, Thank for help us.
Excellent Tutorial.
Temr Do you have a tutorial related with double porosity model in Eclipse? the data file structure, etc.
Please post something like related.
Thank you friend!!!