Junior Member
hello
iam an instrument eng. and i want to be cerifated from ISA as CCST[link Point to another website Only the registered members can access]
but i want some books as following link[link Point to another website Only the registered members can access]
or courses
i have buy a guide book only
can any one help me
Junior Member
Hello
Please i still searching for them
the books list as following:
Calibration: A Technician's Guide
Loop Checking: A Technician's Guide
Automation Network Selection
Basic Math for Process Control
Condensed Handbook of Measurement & Control, 2nd Edition
Control System Documentation: Applying Symbols and Identification
Control System Safety Evaluation and Reliability, 2nd Edition
Electrical Instruments in Hazardous Locations, 4th Edition
Fundamentals of Process Control Theory, 3rd Edition
Good Tuning: A Pocket Guide
Industrial Ethernet, 2nd Edition
ISA Handbook of Measurement Equations and Tables
Maintenance of Instruments & Systems, 2nd Edition
Measurement and Control Basics, 3rd Edition
NEC 2002 National Electric Code Handbook
OSHA Standards, 29 CFR Part 1910
OSHA Standards, 29 CFR Part 1926
Preventive Maintenance, 3rd Edition
Process Control: A Primer for the Nonspecialist and the Newcomer, 2nd Edition
Programmable Controllers, 4th Edition
Reading a P&ID
Safety Instrumented Systems: Design, Analysis, and Justification, 2nd Edition
Start-Up: A Technician's Guide
Successful Instrument and Control System Design
Troubleshooting: A Technician’s Guide
Tuning of Industrial Control Systems, 2nd Edition
Understanding Distributed Processor Systems for Control
Wireless Networks for Industrial Automation
Very Active Member
Control System Documentation
[link Point to another website Only the registered members can access]
Successful Instrument and Control System Design
[link Point to another website Only the registered members can access]
Safety Instrumented Systems: Design, Analysis, and Justification
[link Point to another website Only the registered members can access]
The Condensed Handbook of Measurement and Control
[link Point to another website Only the registered members can access]
Basic Maths for Process control
[link Point to another website Only the registered members can access]
Natioinal Electric code NEC70-2008
[link Point to another website Only the registered members can access]
Natioinal Electric code handbook- 2005
[link Point to another website Only the registered members can access]
ISA Handbook of Measurement Equations and Tables
[link Point to another website Only the registered members can access]
PW : [link Point to another website Only the registered members can access]
Measurement and Control Basics, 3rd Edition
[link Point to another website Only the registered members can access]
Good Tuning: A Pocket Guide
[link Point to another website Only the registered members can access]
Wireless Networks for Industrial Automation
[link Point to another website Only the registered members can access]
And will be updated ..............................................
Last edited by amshah; 07-01-2010 at 01:42 PM.
Active Member
Amshah, please reupload ...Wireless Networks for Industrial Automation Thanks
Very Active Member
Fundamentals of Instrumentation and Measurement (Instrumentation & Measurement Series (ISTE))
By Dominique Placko
Publisher: ISTE Publishing Company
Number Of Pages: 544
Publication Date: 2008-02-04
ISBN-10 / ASIN: 1905209398
ISBN-13 / EAN: 9781905209392
Binding: Hardcover
Book Description:
This title presents the general principles of instrumentation processes. It explains the theoretical analysis of physical phenomena used by standard sensors and transducers to transform a physical value into an electrical signal. The pre-processing of these signals through electronic circuits – amplification, signal filtering and analog-to-digital conversion – is then detailed, in order to provide useful basic information.
Attention is then given to general complex systems. Topics covered include instrumentation and measurement chains, sensor modeling, digital signal processing and diagnostic methods and the concept of smart sensors, as well as microsystem design and applications. Numerous industrial examples punctuate the discussion, setting the subjects covered in the book in their practical context.
[link Point to another website Only the registered members can access]
Very Active Member
PID Controllers: Theory, Design, and Tuning
ISBN: 1556175167 Authors: Karl J. Astrom, Tore Hagglund
This book provides users and manufacturers of PID controllers, as well as educators, with a better understanding of PID control. This second edition takes stock of new developments in digital PID controllers. Modeling methods, implementation details, and problem-solving techniques are presented to help you improve loop performance and product quality. The book examines the auto-tuning and adaptation features of several commercial controllers and it discusses measures for dealing with specific challenges such as reset windup, long process dead times, and oscillatory systems. Design methods and tuning rules that consider factors such as load disturbances, measurement noise, model uncertainty, and set point response are also recommended
[link Point to another website Only the registered members can access]
Observers in Control Systems: A Practical Guide
ISBN: 012237472X Authors: George Ellis
Observers are digital algorithms that combine sensor outputs with knowledge of the system to provide results superior to traditional structures, which rely wholly on sensors. Observers have been used in selected industries for years, but most books explain them with complex mathematics. This book uses intuitive discussion, software experiments, and supporting analysis to explain the advantages and disadvantages of observers. If you are working in controls and want to improve your control systems, observers could be the technology you need and this book will give you a clear, thorough explanation of how they work and how to use them. Control systems and devices have become the most essential part of nearly all mechanical systems, machines, devices and manufacturing systems throughout the world. Increasingly the efficiency of production, the reliability of output and increased energy savings are a direct result of the quality and deployment of the control system. A modern and essential tool within the engineer's kit is the Observer which helps improve the performance and reduce the cost of these systems. George Ellis is the author of the highly successful Control System Design Guide (2nd Edition). Unlike most controls books, which are written by control theorists and academics, Ellis is a leading engineer, designer, author and lecturer working in industry directly with the users of industrial motion control systems. Observers in Control Systems is written for all professional engineers and is designed to be utilized without an in-depth background in control theory. This is a "real-world" book which will demonstrate how observers work and how they can improve your control system. It also shows how observers operate when conditions are not ideal and teaches the reader how to quickly tune an observer in a working system. Software Available on line: A free updated and enhanced version of the author's popular Visual ModelQ allows the reader to practice the concepts with Visual ModelQ models on a PC. Based on a virtual laboratory, all key topics are demonstrated with more than twenty control system models. The models are written in Visual ModelQ ,and are available on the Internet to every reader with a PC. * Teaches observers and Kalman filters from an intuitive perspective * Explains how to reduce control system susceptibility to noise * Shows how to design an adaptive controller based on estimating parameter variation using observers Shows how to improve a control system's ability to reject disturbances * Key topics are demonstrated with PC-based models of control systems. The models are written in both MatLab® and ModelQ; models are available free of charge
Download Links
[link Point to another website Only the registered members can access]
[link Point to another website Only the registered members can access]
[link Point to another website Only the registered members can access]
Last edited by amshah; 07-02-2010 at 01:27 PM.
Junior Member
Thanks alot for your help
I need help for how to study this CCST . have i to study all this books ? or what
what is the guide for it ?
How can i start for preparation ?
is it some books to read or a study guides and modules and this books is a references to see only ?
i need your help , please tell me about it as i am very interested in it
waiting for your reply as soon as possible
Very Active Member
Hi,Originally Posted by kingkassem
As i am not preparing for CCST, i can not really guide, but always u cn enhance your information ( i will not say knowladge) about the subject.
Very Active Member
Electrical Instruments in Hazardous Locations
I can not download the file, if some one can share in Ifile or other.
[link Point to another website Only the registered members can access]
other
[link Point to another website Only the registered members can access]
[link Point to another website Only the registered members can access]
Junior Member
hello
i try now to study CCST,i buy study guide level 1[link Point to another website Only the registered members can access]
from this guide : you will test in # Calibration
# Loop Checking
# Troubleshooting
# Start-Up
# Maintenance/Repair
these books contain these points
if you get some anther book from anther Publisher it may be contain anther stander
to contact me mohamedwaly@gmail.com
Super active member
in 4share
Electrical Installations in Hazardous Locations
[link Point to another website Only the registered members can access]
Last edited by Nabilia; 07-05-2010 at 05:51 PM.
Senior Member
Is there any body to have bellow book:
"Safety Integrity Level Selection: Systematic Methods Including Layer of Protection Analysis"
Authors: Edward M. Marszal , Eric William Scharpf
Hardcover: 248 pages
Publisher: ISA: The Instrumentation, Systems, and Automation Society (May 1, 2002)
Language: English
ISBN-10: 1556177771
ISBN-13: 978-1556177774
Please Upload it.
J
Posting Permissions
Reply With Quote
Bookmarks