WRC Bulletin 449

[smahesh070]

Link not working. Please re upload (WRC 449

[tony_black]

Here is WRC 488 Damage Mechanisms Affecting Fixed Equipment in the Pulp and Paper Industry:

[link Point to another website Only the registered members can access]

[curiousguy]

Thanks a lot Tony black

[spk]

Hi Tony !

I am unable to download from the link posted by you. Could you please upload it again as I too need this document.

Thanks in advance.

[tony_black]

Here is WRC 488

[link Point to another website Only the registered members can access]

[tony_black]

I have updated the link in post #2 for WRC 449

[Paldex]

Thankyou very much Mr.Tony

[spk]

I need these WRC Bulletins.

076-Gas And Oil Pipeline Welding Practices

089-Experimental Investigation Of Stresses In Nozzles In Cylindrical Pressure Vessels

179-Stress Indices and Flexibility Factiors for Moment Loadings on Elbows and Curved Pipe

198-Secondary Stress Indices for Integral Structural Attachments to Striaght Pipe; Stress Indices at Lug Supports on Piping Systems

285-Stress Indices and Flexibility Factors for Concentric Reducers ; Finite Element Analysis of Eccentric Reducers and Comparisons with Concentric Reducers

296-Fitness-For-Service Criteria For Pipeline

308-Verification and Application of an Inelastic Analysis Method for LMFBR Piping System

314-Bolted Flanged Connections with Full Face Gaskets

321-The Dynamic Deformation of Piping

329-Accuracy of Stress Intensification Factors for Branch Connections

335-A Review of Area Replacement Rules for Pipe Connections in Pressure Vessels and Piping

356-Finite Element Modelling Of A Single Pass Weld ; Finite Element Analysis Of Multi-Pass Welds ; Thermal And Mechanical Simulations Of Resistance Spot Welding

360-Stress Indices, Pressure Design And Stress Intensification Factors For Laterals In Piping

367-Basis Of Current Dynamic Stress Criteria For Piping

379-Alternative Methods For Seismic Analysis Of Piping Systems

380-Recommendations To ASME For Code Guidelines And Criteria For Continued Operation Of Equipment

391-Elevated Temperature Testing Of Gaskets For Bolted Flanged Connections

392-Developing Stress Intensification Factors: I - Standardized Method For Developing Stress Intensification Factors For Piping Components ; II - Effects Of Weld Metal Profile On The Fatigue Life Of Integ

412-Challenges and Solutions in Repair Welding for Power and Processing Plants – Proceedings of a Workshop

417-Design Guide To Reduce Potential For Vibration Caused By Fluid Flow Inside Pipes-Review And Survey

423-Evaluation Of Seismic Response Data For Piping

425-A Review Of Methods For The Analysis Of Buried Pressure Piping

429-3D Stress Criteria Guidelines For Application

432-Fatigue Strength Reduction And Stress Concentration Factors For Welds In Pressure Vessels And Piping: )Interpretive Review Of Weld Fatigue-Strength-Reduction And Stress-Concentration Factors ; II)Fati

433-Fatigue Of Butt-Welded Pipe And Effect Of Testing Methods: Fatigue Of Butt-Welded Pipe ; Effect Of Testing Methods On Stress Intensification Factors

436-Evaluation Of Small (R/R<0.5) Branch Connections With Through-Run Moments

441-Development Of A Comprehensive Static Seismic Analysis Method For Piping Systems

446-Design And Repair Of Buried Pipe

448-Evaluation of Welded Attachments on Pipe and Elbows

468-Leak Testing Of A Raised Face Weld Neck Flange

472-Using Finite Element Analysis To Determine Piping Elbow Bending Moment (B2) Stress Indices

476-Recommendations for Determining Residual Stresses in Fitness-For-Service Assessment

482-Special Finite Elements for Piping Elbows and Bends at High Temperatures with Creep

492-Piping System SIFs and Flexibility Analysis Criteria

500-Stress or Strain Criteria for Combined Static and Dynamic Loading

505-An Overview and Validation of the Fitness-For-Service Assessment Procedures for Local Thin Areas in API 579

510-Analysis of the Effects of Temperature on Bolted Joints

Anything out of this list, would be a lot appreciated.

Thanks.
( The above list has been provide by one of our kind forum member. I have just copied the list here, as I am also searching the above WRC Bulletins)

[terio]

thankx tony_black.. this provides a big help for a new grad like me..

[tbaracu]

Many thanks for upper links, bulletin WRC 330 have somebody ?

[tbaracu]

the link to wrc 488 does not contain the file

[coolguy123]

in need of WRC 452. Please upload